pandaboard与beagleboard的NFS,TFTP,以及dhcp服务设置

最近需要重新搭建一下pandaboard与beagleboard的环境，特把搭建的过程记录下来，留以后备用。

基于环境ubuntu10.04

* configure TFTP/NFS/DHCP
** TFTP
   # modify /etc/default/tftpd-hpa
   TFTP_DIRECTORY="/var/lib/tftpboot" -> TFTP_DIRECTORY="/tftpboot"
** DHCP
   # manual set local network
     ip:192.168.1.198
     netmask: 255.255.255.0
     gateway: 192.168.1.1
   #edit file /etc/default/dhcp3-server or /etc/default/isc-dhcp-server
    modify line INTERFACES="" -> INTERFACES="eth0"
   #edit file /etc/dhcp3/dhcpd.conf  add the following lines
    subnet 192.168.1.0 netmask 255.255.255.0 {
        range dynamic-bootp 192.168.1.2 192.168.1.180;
    }
    host panda {
        hardware ethernet 0a:40:55:e3:3b:0a;
        option host-name pandaboard;
    }
**NFS
   mkdir /tftpboot
   # edit /etc/exports
     add line /tftpboot *(rw,sync,no_wdelay,subtree_check,no_root_squash)

* start server TFTP/NFS/DHCP
** sudo /etc/init.d/dhcp3-server  restart
** sudo /etc/init.d/isc-dhcp-server  restart
** sudo /etc/init.d/nfs-kernel-server restart
** sudo /etc/init.d/tftpd-hpa restart

================================