基于矢量拟合（VF）法和分频拟合（FpF）法的电力系统的电磁瞬变（EMT）仿真研究（Matlab代码实现）

 👨‍🎓个人主页：研学社的博客  

💥💥💞💞欢迎来到本博客❤️❤️💥💥

🏆博主优势：🌞🌞🌞博客内容尽量做到思维缜密，逻辑清晰，为了方便读者。

⛳️座右铭：行百里者，半于九十。

📋📋📋本文目录如下：🎁🎁🎁

目录

💥1 概述

📚2 运行结果

🎉3 参考文献

🌈4 Matlab代码、数据、文章讲解

---

💥1 概述

电力系统的电磁瞬变（EMT）仿真比以往任何时候都受到更多的关注，因为传统上通过稳定性类型仿真进行的一些系统研究现在由EMT仿真执行。这一趋势源于这样一个事实，即需要波形级仿真进行设计和性能评估的电力电子转换器现在已实际用于可再生能源集成、系统互连、稳定和控制。因此，除了过压、浪涌电流、异常振荡和继电器设置研究等常规研究之外，EMT 仿真还用于这些应用。

摘要：通常情况下，网络或系统的频率响应数据是可用的，并且人们希望从频率响应数据中识别线性等效物，以进行时域仿真和其他目的。为此，提出了多种方法，矢量拟合（VF）法和分频拟合（FpF）法常用于电力系统的电磁瞬变（EMT）仿真。主要应用是频率相关传输线建模和频率相关网络建模。本文给出了FpF方法的MATLAB代码。尽管文献中已经完整介绍了FpF方法中使用的算法的数学描述，但说明性代码对于理解其实现的细节仍然有用且必要。经验证，本文所示的代码功能齐全，可以作为功能正常的软件包使用。

Abstract:

It is often the case that the frequency response data of a network or a system is available and one wants to identify a linear equivalent from the frequency response data for time-domain simulations and other purposes. To this end, a variety of methods have been proposed, and the vector fitting (VF) method and the frequency-partitioning fitting (FpF) method are often used for electromagnetic transient (EMT) simulations of power systems. The main applications are frequency-dependent transmission-line modeling and frequency-dependent network modeling. This paper presents illustrative MATLAB code of the FpF method. Although the mathematical descriptions of the algorithms used in the FpF method have been fully presented in the literature, the illustrative code is still useful and necessary to understand the details of their implementation. It is verified that the code shown in this paper is fully functional and it can be used as a functioning software package.

详细文章讲解见第4部分。

📚2 运行结果

🎉3 参考文献

部分理论来源于网络，如有侵权请联系删除。

[1] Taku Noda, "Implementation of the frequency-partitioning fitting method for linear equivalent identification from frequency response data," Proc. of 2016 IEEE Power & Energy Society General Meeting (PESGM), Boston, MA. USA, July 2016.

[2] Taku Noda, "Identification of a multiphase network equivalent for electromagnetic transient calculations using partitioned frequency response," IEEE Trans. on Power Delivery, vol. 20, no. 2, Apr. 2005.

[3] Taku Noda, "A binary frequency-region partitioning algorithm for the identification of a multiphase network equivalent for EMT studies," IEEE Trans. on Power Delivery, vol. 22, no. 2, Apr. 2007

[4] Juan A. Martinez-Velasco (Editor), "Power System Transients: Parameter Determination," CRC Press, Oct. 2009, ISBN-10: 1420065297, ISBN-13: 978-1420065299. (See Appendix A)

[5] Taku Noda, "Application of frequency-partitioning fitting to the phase-domain frequency-dependent modeling of overhead transmission lines," IEEE Trans. on Power Delivery, vol. 30, no. 1, Feb. 2015.

[6] Taku Noda, "Application of frequency-partitioning fitting to the phase-domain frequency-dependent modeling of underground cables," IEEE Trans. on Power Delivery, vol. 31, no. 4, Aug. 2016.

🌈4 Matlab代码、数据、文章讲解