<Huawei> <Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname r1 [r1]int g0/0/0 [r1-GigabitEthernet0/0/0]ip address 1.1.0.1 30 [r1-GigabitEthernet0/0/0]int g0/0/1 [r1-GigabitEthernet0/0/1]ip address 1.2.0.1 30 [r1-GigabitEthernet0/0/1]int lo0 Jul 10 2024 20:15:27-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [r1-LoopBack0]ip address 192.168.1.1 24 Jul 10 2024 20:15:28-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [r1-LoopBack0]ip address 192.168.1.1 24 [r1-LoopBack0]q
r2
<Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname r2 [r2]int g0/0/0? . . <cr> <cr> [r2]int g0/0/0 [r2-GigabitEthernet0/0/0]ip address 2.0.0.1 30 [r2-GigabitEthernet0/0/0]int lo0 Jul 10 2024 20:21:01-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [r2-LoopBack0]ip address 192.168.2.1 24 [r2-LoopBack0]q
r3
<Huawei> <Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname r3 [r3]int g0/0/0 ? <cr> Please press ENTER to execute command [r3]int g0/0/0 [r3-GigabitEthernet0/0/0]ip address 3.0.0.1 30 [r3-GigabitEthernet0/0/0]int lo0 [r3-LoopBack0]ip address 192.168.3.1 24 Jul 10 2024 20:22:39-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [r3-LoopBack0]ip address 192.168.3.1 24 [r3-LoopBack0]q
r4
[r4]int g0/0/0 [r4-GigabitEthernet0/0/0]ip address 4.0.0.1 30 [r4-GigabitEthernet0/0/0]int lo0 Jul 10 2024 20:25:46-08:00 r4 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [r4-GigabitEthernet0/0/0]int lo0 [r4-LoopBack0]ip address 192.168.4.1 24 [r4-LoopBack0]q
r5
<Huawei>ys <Huawei>sys <Huawei>system-view Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname r5 [r5]int g0/0/0 ? <cr> Please press ENTER to execute command [r5]int g0/0/0 [r5-GigabitEthernet0/0/0]ip address 5.0.0.1 30 [r5-GigabitEthernet0/0/0]int lo0 Jul 10 2024 20:26:41-08:00 r5 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [r5-LoopBack0]ip address 192.168.5.1 24 [r5-LoopBack0]q
[r1]interface Tunnel 0/0/1 [r1-Tunnel0/0/1]ip address 192.168.7.1 24 [r1-Tunnel0/0/1]tunnel-protocol gre p2mp [r1-Tunnel0/0/1]source 1.2.0.1 Jul 10 2024 20:17:20-08:00 r1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface Tunnel0/0/1 has entered the UP state. [r1-Tunnel0/0/1]nhrp network-id 101 [r1-Tunnel0/0/1]nhrp entry 192.168.7.2 4.0.0.1 register [r1-Tunnel0/0/1]nhrp entry 192.168.7.3 5.0.0.1 register [r1-Tunnel0/0/1]q
r4
[r4]interface Tunnel 0/0/1 [r4-Tunnel0/0/1]ip address 192.168.7.2 24 [r4-Tunnel0/0/1]tunnel-protocol gre p2mp [r4-Tunnel0/0/1]source 4.0.0.1 Jul 10 2024 20:26:04-08:00 r4 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface Tunnel0/0/1 has entered the UP state. [r4-Tunnel0/0/1]nhrp network-id 101? INTEGER<1-4294967295> Nhrp network id [r4-Tunnel0/0/1]nhrp network-id 101 [r4-Tunnel0/0/1]nhrp entry 192.168.7.1 1.2.0.1 register? register Register [r4-Tunnel0/0/1]nhrp entry 192.168.7.1 1.2.0.1 register [r4-Tunnel0/0/1]nhrp entry 192.168.7.3 5.0.0.1 register [r4-Tunnel0/0/1]q
r5
[r5]interface Tunnel 0/0/1 [r5-Tunnel0/0/1]ip address 192.168.7.3 24 [r5-Tunnel0/0/1]tunnel-protocol gre p2mp? p2mp Point to multi-point GRE mode [r5-Tunnel0/0/1]tunnel-protocol gre p2mp [r5-Tunnel0/0/1]nhrp network-id 101 [r5-Tunnel0/0/1]source 5.0.0.1 Jul 10 2024 20:26:58-08:00 r5 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface Tunnel0/0/1 has entered the UP state. [r5-Tunnel0/0/1] [r5-Tunnel0/0/1]nhrp entry 192.168.7.1 1.2.0.1 register [r5-Tunnel0/0/1]nhrp entry 192.168.7.2 4.0.0.1 register [r5-Tunnel0/0/1]q
中心配置
r1
[r1]interface Tunnel 0/0/0 [r1-Tunnel0/0/0]ip address 192.168.6.1 24 [r1-Tunnel0/0/0]tunnel-protocol gre p2mp [r1-Tunnel0/0/0]nhrp network-id 100 [r1-Tunnel0/0/0]nhrp entry multicast dynamic? dynamic Allow NHRP to automatically add routers to the multicast NHRP mappings [r1-Tunnel0/0/0]nhrp entry multicast dynamic [r1-Tunnel0/0/0]source 1.1.0.1 Jul 10 2024 20:17:53-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on the interface Tunnel0/0/0 has entered the UP state. [r1-Tunnel0/0/0]ospf network-type broadcast? broadcast Specify OSPF broadcast network [r1-Tunnel0/0/0]ospf network-type broadcast [r1-Tunnel0/0/0]q
分支配置
r2
[r2]interface Tunnel 0/0/0 [r2-Tunnel0/0/0]ip address 192.168.6.2 24 [r2-Tunnel0/0/0]tunnel-protocol gre p2mp [r2-Tunnel0/0/0]source g0/0/0 Jul 10 2024 20:21:52-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface Tunnel0/0/0 has entered the UP state. [r2-Tunnel0/0/0]nhrp network-id 100 [r2-Tunnel0/0/0]nhrp entry 192.168.6.1 1.1.0.1 register [r2-Tunnel0/0/0]q
r3
[r3]interface Tunnel 0/0/0 [r3-Tunnel0/0/0]ip address 192.168.6.3 24 [r3-Tunnel0/0/0]tunnel-protocol gre p2mp [r3-Tunnel0/0/0]source g0/0/0 Jul 10 2024 20:22:58-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface Tunnel0/0/0 has entered the UP state. [r3-Tunnel0/0/0]nhrp network-id 100 [r3-Tunnel0/0/0]nhrp entry 192.168.6.1 1.1.0.1 register