[winbond][datasheet][w25q256jv]1. GENERAL DESCRIPTIONS

The W25Q256JV (256M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power. The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 1µA for power-down. All devices are offered in space-saving packages.

The W25Q256JV array is organized into 131,072 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q256JV has 8,192 erasable sectors and 512 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage.

The W25Q256JV support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI, Quad Peripheral Interface (QPI) as well as Double Transfer Rate (DTR): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 133MHz are supported allowing equivalent clock rates of 266MHz (133MHz x 2) for Dual I/O and 532MHz (133MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O instructions. These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.

A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device ID and SFDP Register, a 64-bit Unique Serial Number and three 256-bytes Security Registers.

### 解决 Docker 拉取镜像失败的方法 当遇到 `docker pull` 失败的情况时,可能由多种原因引起。以下是几种常见的解决方案: #### 1. 配置镜像加速器 如果网络连接不稳定或速度较慢,可以考虑配置国内的镜像加速器来提高下载速度并减少错误发生的可能性[^4]。 对于 CentOS 7 用户来说,在 `/etc/docker/daemon.json` 中加入如下内容即可完成设置: ```json { "registry-mirrors": ["https://<your_mirror>.mirror.aliyuncs.com"] } ``` 之后重启 Docker 守护进程使更改生效: ```bash sudo systemctl restart docker ``` #### 2. 使用可信仓库源 有时官方默认库中的资源不可用也会造成拉取失败。此时可以选择其他可靠的第三方存储库作为替代方案。例如阿里云提供了公共可用的服务供开发者们选用[^3]。 尝试从不同的注册表获取相同版本号的目标镜像文件可能会解决问题所在。 #### 3. 更新客户端至最新稳定版 旧版本可能存在已知缺陷影响正常工作流程;因此保持软件处于最新状态有助于规避潜在风险因素。可以通过包管理工具轻松实现升级操作: ```bash sudo yum update -y docker-ce ``` #### 4. 查看具体报错信息 仔细阅读终端输出的日志记录能够帮助定位实际发生的位置以及大致方向。通常情况下,详细的提示会给出下一步行动指南或者指向特定文档页面进一步了解情况说明[^1]。 #### 5. 清除本地缓存数据 偶尔残留的历史快照干扰到新请求处理过程也是不容忽视的一方面。执行清理命令移除非活动层和构建阶段产物往往能带来意想不到的效果。 ```bash docker system prune --all --force ``` 以上措施综合运用可有效应对大多数场景下的镜像加载障碍现象。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值