All operations are based on Ubuntu.
In case eth3 is a port of compute node which configured to trunk
1, make sure the module 802.1q has been loaded
lsmod | grep 802
modprobe 8021q
2, install software vlan
apt-get install vlan
3, add a vlan port
vconfig add eth3 vlanid
eg: vconfig add eth3 613
4, add a bridge for vlan
brctl addbr brvlan
5, add the vlan port to the bridge
brctl addif brvlan vlanport
eg: brctl addif brvlan eth3.613
6, enable a vm from kvm
qemu-system-x86-64 --enable-kvm -hda xxx.img -net nic -net tap,ifname=tap0
On ubuntu 12.04, it will auto create a tap, and you need use brctl command to add the tap to the brigde for vlan.
but on ubuntu 14.04 you need create the tap and add it to the brigde for vlan before execute this command.