ubuntu通过danted搭建socks5代理

服务端配置转自：https://blog.csdn.net/qq_29663071/article/details/53337975（过时）

1.4.2版本参考How to Set Up Dante Proxy for Private Connections on Ubuntu 20.04 | DigitalOcean

客户端使用proxifier_3.21

1.安装dante-server

apt-get install dante-server

 

2.修改配置文件：
备份原配置文件

mv /etc/danted.conf /etc/danted.conf.bak

新建配置文件

touch /etc/danted.conf nano /etc/danted.conf

匿名配置内容

logoutput: /var/log/danted.log internal: 你的内网IP地址 port = 1080 external: 你的内网IP地址 method: username none user.privileged: proxy user.notprivileged: nobody user.libwrap: nobody client pass { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect disconnect } pass { from: 0.0.0.0/0 to: 0.0.0.0/0 port gt 1023 command: bind log: connect disconnect } pass { from: 0.0.0.0/0 to: 0.0.0.0/0 command: connect udpassociate log: connect disconnect } block { from: 0.0.0.0/0 to: 0.0.0.0/0 log: connect error }

3.创建log文件夹
mkdir /var/log/sockd

4.启动Dante
/etc/init.d/danted start
 

5.检测是否启动成功
netstat -anp | grep 1080
 

用户连接后查看连接情况

开启用户身份验证

sudo nano /etc/danted.conf

logoutput: /var/log/danted.log
internal: 192.168.237.25 port = 8001
external: 192.168.237.25
method: username  #none
user.privileged: root
user.notprivileged: 用户名(注意前面的空格。。。。)
user.libwrap: nobody
client pass {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: connect disconnect
}
pass {
        from: 0.0.0.0/0 to: 0.0.0.0/0
        command: bind connect udpassociate
        log: error # connect disconnect iooperation
        method: username
}
block {
from: 0.0.0.0/0 to: 0.0.0.0/0
log: connect error

}

可以使用useradd指令添加一个用户 如danted

然后设置密码passwd danted