华为二层交换机配置命令详解

配置交换机，从基础开始。
以下是配置的交换机命令。（HUAWEI S3000）
本人认为有五个步骤是重点（红色字体）

配置过程（// 后面为注释）


1.改变中文模式
language-mode chinese //习惯英语的可以不用此步骤

2.进入系统试图
system-view

3.设置特权密码：
super password cipher NIMEI //设置特权密文密码为NIMEI
super password level 3 cipher NIMEI //优先等级为3级 密文密码为NIMEI

4. 创建vlan 1801：
vlan 1801 //创建1801vlan（1-2048随便选，除管理vlan）
port ethernet 0/1 to ethernet 0/23 //允许1-23口通过vlan1801
quit //退出
设置TRUNK：
interface ethernet 0/24 //进入24口
port link-tybe trunk //设置为trunk口
port trunk permit vlan all //设置允许所有vlan通过trunk口
quit //退出

5.创建管理VLAN：
vlan 2 //创建管理vlan2
management-vlan 2 //管理vlan2
interface vlan 2 //进入vlan2
ip address 192.168.1.232 255.255.255.0 //设置ip地址
quit //退出

6. 开启telnet:
local-user wlzx //建立本地用户wlzx（名字随便定，因为我是学校网络中心的，所以以wlzx起名）
password simple 1 //设置明文密码为1
service-type telnet //telnet服务类型
quit //退出
user-interface vty 0 4 //进入虚拟终端
Authentication-mode scheme //身份验证模式计划
Protocol inbound all //指定所在的用户接口支持所有协议
User privilege level 3 //等级为3级
quit //退出

7. 设置SNMP：
snmp-agent community read CanoMe0s //设置SNMP的团体访问名以及对应的MIB视图和访问控制列表 命名为CanoMe0s（这个名字貌似是固定的）
snmp-agent sys-info version all //这个貌似是全局试图查看

8. 设置静态路由：
ip route-static 0.0.0.0 0.0.0.0 192.168.1.254 //设置静态路由

9.保存
save

 

以下为代码

 

 

#
sysname Quidway
#
super password level 3 cipher R('XM05JYB`<KT;28$*BU!!!
#
radius scheme system
server-type huawei
primary authentication 127.0.0.1 1645
primary accounting 127.0.0.1 1646
user-name-format without-domain

domain system
radius-scheme system
access-limit disable
state active
vlan-assignment-mode integer
idle-cut disable
self-service-url disable
messenger time disable

domain default enable system
#
local-server nas-ip 127.0.0.1 key huawei

local-user wlzx
password cipher M\>.IRGDG)X>`PG:,B5U`Q!!
service-type telnet level 1
#
temperature-limit 0 42 65
#
management-vlan 2
#
vlan 1
#
vlan 2
#
vlan 1801
#
interface Vlan-interface2
ip address 192.168.1.232 255.255.255.0
#
interface Aux0/0
#
interface Ethernet0/1
port access vlan 1801
#
interface Ethernet0/2
port access vlan 1801
#
interface Ethernet0/3
port access vlan 1801
#
interface Ethernet0/4
port access vlan 1801
#
interface Ethernet0/5
port access vlan 1801
#
interface Ethernet0/6
port access vlan 1801
#
interface Ethernet0/7
port access vlan 1801
#
interface Ethernet0/8
port access vlan 1801
#
interface Ethernet0/9
port access vlan 1801
#
interface Ethernet0/10
port access vlan 1801
#
interface Ethernet0/11
port access vlan 1801
#
interface Ethernet0/12
port access vlan 1801
#
interface Ethernet0/13
port access vlan 1801
#
interface Ethernet0/14
port access vlan 1801
#
interface Ethernet0/15
port access vlan 1801
#
interface Ethernet0/16
port access vlan 1801
#
interface Ethernet0/17
port access vlan 1801
#
interface Ethernet0/18
port access vlan 1801
#
interface Ethernet0/19
port access vlan 1801
#
interface Ethernet0/20
port access vlan 1801
#
interface Ethernet0/21
port access vlan 1801
#
interface Ethernet0/22
port access vlan 1801
#
interface Ethernet0/23
port access vlan 1801
#
interface Ethernet0/24
port link-type trunk
port trunk permit vlan all
#
interface NULL0
#
ip route-static 0.0.0.0 0.0.0.0 192.168.1.254 preference 60
#
snmp-agent
snmp-agent local-engineid 800007DB000FE2222CE16877
snmp-agent community read  CanoMe0s
snmp-agent sys-info location BeiJing China
snmp-agent sys-info version all
#
user-interface aux 0
user-interface vty 0 4
authentication-mode scheme
user privilege level 3
#
return