gdb中core文件调试

程序运行时，如果有错误，则会产生core文件。
core文件如何查看错误

在Linux系统下，应用程序崩溃，一般会产生core文件，如何根据core文件查找问题的所在，并做相应的分析和调试，是非常重要的，本文对此做简单介绍。
例如，一个程序cmm_test_tool在运行的时候发生了错误，并生成了一个core文件，如下:

-rw-r–r– 1 root cmm_test_tool.c
-rw-r–r– 1 root
cmm_test_tool.o
-rwxr-xr-x 1 root cmm_test_tool
-rw--- 1 root
core.19344
-rw--- 1 root core.19351
-rw-r–r– 1 root
cmm_test_tool.cfg
-rw-r–r– 1 root cmm_test_tool.res
-rw-r–r– 1 root
cmm_test_tool.log
[root@AUTOTEST_SIM2 mam2cm]#

就可以利用命令gdb进行查找，参数一是应用程序的名称，参数二是core文件，运行

gdb  cmm_test_tool core.19351

结果如下:

[root@AUTOTEST_SIM2 mam2cm]# gdb cmm_test_tool core.19351
GNU gdb Red Hat
Linux (5.2.1-4)
Copyright 2002 Free Software Foundation, Inc.
GDB is free
software, covered by the GNU General Public License, and you are
welcome to
change it and/or distribute copies of it under certain conditions.
Type “show
copying” to see the conditions.
There is absolutely no warranty for GDB. Type
“show warranty” for details.
This GDB was configured as
“i386-redhat-linux”…
Core was generated by `./cmm_test_tool’.
Program
terminated with signal 11, Segmentation fault.
Reading symbols from
/lib/i686/libpthread.so.0…done.
Loaded symbols for
/lib/i686/libpthread.so.0
Reading symbols from
/lib/i686/libm.so.6…done.
Loaded symbols for /lib/i686/libm.so.6
Reading
symbols from /usr/lib/libz.so.1…done.
Loaded symbols for
/usr/lib/libz.so.1
Reading symbols from
/usr/lib/libstdc++.so.5…done.
Loaded symbols for
/usr/lib/libstdc++.so.5
Reading symbols from
/lib/i686/libc.so.6…done.
Loaded symbols for /lib/i686/libc.so.6
Reading
symbols from /lib/libgcc_s.so.1…done.
Loaded symbols for
/lib/libgcc_s.so.1
Reading symbols from /lib/ld-linux.so.2…done.
Loaded
symbols for /lib/ld-linux.so.2
Reading symbols from
/lib/libnss_files.so.2…done.
Loaded symbols for /lib/libnss_files.so.2
#0
0×4202cec1 in __strtoul_internal () from
/lib/i686/libc.so.6
(gdb)

进入gdb提示符，输入where，找到错误发生的位置和堆栈，如下:

(gdb) where
#0 0×4202cec1 in __strtoul_internal () from
/lib/i686/libc.so.6
#1 0×4202d4e7 in strtoul () from
/lib/i686/libc.so.6
#2 0×0804b4da in GetMaxIDFromDB (get_type=2,
max_id=0×806fd20) at cmm_test_tool.c:788
#3 0×0804b9d7 in ConstrctVODProgram
(vod_program=0×40345bdc) at cmm_test_tool.c:946
#4 0×0804a2f4 in
TVRequestThread (arg=0×0) at cmm_test_tool.c:372
#5 0×40021941 in
pthread_start_thread () from /lib/i686/libpthread.so.0
(gdb)

至此，可以看出文件出错的位置是函数 GetMaxIDFromDB
，两个参数分别是2和0×806fd20，这个函数位于源代码的788行，基于此，我们就可以有针对性的找到问题的根源，并加以解决。
也可以对core文件
up 往上走，并且可以查看值
down 往下走，并且可以查看值