首先开始对PC1、PC2、PC3进行配置
PC1:
PC2:
PC3:
其次对路由器R1、R2、R3进行配置
R1:
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#int f0/0
R1(config-if)#ip add 172.16.3.1 255.255.255.0
R1(config-if)#no shut
R1(config-if)#exit
R1(config)#int s0/3/0
R1(config-if)#ip add 172.16.2.1 255.255.255.0
R1(config-if)#clock rate 64000
R1(config-if)#no shut
R2:
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#int f0/0
R2(config-if)#ip add 192.16.3.1 255.255.255.0
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#int s0/3/0
R2(config-if)#ip add 172.16.2.2 255.255.255.0
R2(config-if)#clock rate 64000
R2(config-if)#no shut
R2(config-if)#exit
R2(config)#int s0/3/1
R2(config-if)#ip add 192.16.1.1 255.255.255.0
R2(config-if)#clock rate 64000
R2(config-if)#no shut
R3:
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R3
R3(config)#int f0/0
R3(config-if)#ip add 192.168.3.1 255.255.255.0
R3(config-if)#no shut
R3(config-if)#exit
R3(config)#int s0/3/1
R3(config-if)#ip add 192.168.2.1 255.255.255.0
R3(config-if)#clock rate 64000
R3(config-if)#no shut
静态路由配置:
R1:
R1>en
R1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R1(config)#ip route 192.16.3.0 255.255.255.0 172.16.2.2
R1(config)#ip route 192.168.2.0 255.255.255.0 172.16.2.2
R1(config)#ip route 192.168.3.0 255.255.255.0 172.16.2.2
R2:
R2>en
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#ip route 172.16.3.0 255.255.255.0 172.16.2.1
R2(config)#ip route 192.168.3.0 255.255.255.0 192.168.2.1
R3:
R3>en
R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#ip route 192.16.3.0 255.255.255.0 192.16.1.1
R3(config)#ip route 172.16.2.0 255.255.255.0 192.16.1.1
R3(config)#ip route 172.16.3.0 255.255.255.0 192.16.1.1
产看路由:
R1:
R1#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
172.16.0.0/24 is subnetted, 2 subnets
C 172.16.2.0 is directly connected, Serial0/3/0
C 172.16.3.0 is directly connected, FastEthernet0/0
S 192.16.3.0/24 [1/0] via 172.16.2.2
S 192.168.2.0/24 [1/0] via 172.16.2.2
S 192.168.3.0/24 [1/0] via 172.16.2.2
R2:
R2#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
172.16.0.0/24 is subnetted, 2 subnets
C 172.16.2.0 is directly connected, Serial0/3/0
S 172.16.3.0 [1/0] via 172.16.2.1
C 192.16.1.0/24 is directly connected, Serial0/3/1
C 192.16.3.0/24 is directly connected, FastEthernet0/0
R3:
R3#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route
Gateway of last resort is not set
C 192.168.2.0/24 is directly connected, Serial0/3/1
C 192.168.3.0/24 is directly connected, FastEthernet0/0
测试: