基于单片机多功能数字钟系统仿真设计-毕设课设资料

资料下载地址-1026（百度网盘）：点击下载

实现时钟计时功能，闹钟设置功能，时间调整、12/24小时切换功能，能实时显示温度，包含显示电路，按键电路，单片机电路，温度传感器电路，时钟电路，声光电路等。

#include <reg52.h>
#include <intrins.h>
#define NOP		_nop_()
#define TEMP_ALERT_L	0x00
#define TEMP_ALERT_H	0x25
#define SET_TIME	6500
#define END_ALERT	100
typedef unsigned char	uchar;
typedef unsigned int	uint;

sbit	RS		= P2 ^ 0;       /* P2^0; */
sbit	RW		= P2 ^ 1;       /* P2^1; */
sbit	EN		= P2 ^ 2;       /* P2^2; */
sbit	RST		= P2 ^ 3;       /* DS1302使能信号，高电平有效 */
sbit	CLK		= P2 ^ 4;       /* 时钟信号 */
sbit	IO		= P2 ^ 5;
sbit	DQ		= P2 ^ 6;       /* ds18b20数据线 */
sbit	BUZ		= P2 ^ 7;
sbit	Touch		= P1 ^ 4;
sbit	BG		= P1 ^ 5;
sbit	Key_Select	= P1 ^ 0;
sbit	Key_Up		= P1 ^ 1;
sbit	Key_Down	= P1 ^ 2;
sbit	Key_Alert	= P1 ^ 3;
sbit	Key_12_24	= P1 ^ 6;
sbit	Key_clear	= P1 ^ 7;

bit	timerflag = 0;
uint	j, bg_count = 0, sf1 = SET_TIME, sf2 = 0;
uchar	i, tmp, TEMP, dat, re_dat, wr_dat, alert = 0, temp_flag = 0, select = 0;
uchar	temperature[2];
uchar	alesta[2] = { 'F', 'F' };
uchar	alert_sleep[2] = { 0, 0 };
uchar	alert_hour[2];
uchar	slpcon[2] = { 0, 0 };
uchar	disp1[16]	= "    Welcome!    ";
uchar	disp2[16]	= "Have A Nice Day!";
uchar	alerttime1[2]	= { 0, 0 };
uchar	alerttime2[2] = { 12, 0 };                                      /* 闹钟初始时间 */
uchar	rtc[7] = { 0, 0, 4, 9, 0, 0, 0 };                               /* 即时时间 real time clock */
uchar	writeaddr[7] = { 0x8c, 0x8a, 0x88, 0x86, 0x84, 0x82, 0x80 };    /* 写命令数组  年周月日时分秒 */
uchar	readaddr[7] = { 0x8d, 0x8b, 0x89, 0x87, 0x85, 0x83, 0x81 };

void delay_ms( uint );


void delay_50us( uint );


void delay_us( uchar );