1、网络配置
1.1使用ifconfig配置网络接口
lenovo@lenovo-virtual-machine:~$ ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.0.107 netmask 255.255.255.0 broadcast 192.168.0.255
inet6 fe80::ce97:74a5:12d5:7d95 prefixlen 64 scopeid 0x20<link>
ether 00:0c:29:98:0d:fc txqueuelen 1000 (以太网)
RX packets 6841 bytes 9574956 (9.5 MB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2534 bytes 234178 (234.1 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (本地环回)
RX packets 505 bytes 36385 (36.3 KB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 505 bytes 36385 (36.3 KB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
1.2 使用route配置静态路由
1.3 主机名和IP地址间的映射
1.4 使用wvdial建立PPP连接
2、传输文件
2.1 网络硬盘:NFS