T044 - Drive Tape Alert 19 - Nearing Media Life

Name: T044 - Drive Tape Alert 19 - Nearing Media Life


Ticket Number: 31

 

State: UnOpened

Creation Date: 19-Feb-2016 2:09:05

 

Severity: 3 - Low (sev3)

Last Occurrence: 19-Feb-2016 2:09:05

 


Description:

The tape drive issued a Tape Alert, informing that thetape cartridge media is nearing the end of its calculated useful life


Technical Details

Drive Error Code

0x200

Fault description

Tape Alert 19 Detected

Drive Location

[0, 2]

Media Barcode

000445L6

Partition

library_a

Drive Serial Number

HU

Drive Firmware Version

J53Z

Drive Description

HP LTO-6 DUAL-FC

参考:  http://blog.csdn.net/eviswang/article/details/50729943

以下是一个简单的示例代码,用于使用ESP32-C3硬定时器控制继电器并发出寿命警报。该代码需要一个外部继电器模块连接到ESP32-C3的GPIO引脚。 ```c++ #include <Arduino.h> #define RELAY_PIN 2 //继电器控制引脚 #define TIMER_INTERVAL 10000 // 定时器间隔,单位:毫秒 #define MAX_RELAY_CYCLES 10000 // 继电器最大寿命周期 #define WARNING_CYCLES_LEFT 5000 // 剩余寿命周期低于此值时发出警报 hw_timer_t * timer = NULL; volatile int relayCycles = 0; bool relayOn = false; void IRAM_ATTR onTimer() { if (relayOn) { digitalWrite(RELAY_PIN, LOW); relayOn = false; } else { digitalWrite(RELAY_PIN, HIGH); relayOn = true; relayCycles++; if (relayCycles >= MAX_RELAY_CYCLES) { Serial.println("Relay has reached end of life!"); timerAlarmDisable(timer); } else if (relayCycles >= WARNING_CYCLES_LEFT) { Serial.println("Relay is nearing end of life!"); } } } void setup() { Serial.begin(9600); pinMode(RELAY_PIN, OUTPUT); digitalWrite(RELAY_PIN, LOW); timer = timerBegin(0, 80, true); timerAttachInterrupt(timer, &onTimer, true); timerAlarmWrite(timer, TIMER_INTERVAL * 1000, true); timerAlarmEnable(timer); } void loop() { // 空函数 } ``` 在这个示例中,我们使用ESP32-C3的硬定时器来控制继电器的开关,并通过计数继电器周期来估计继电器的寿命。当继电器周期达到最大值时,我们禁用定时器并发出“寿命到期”的警报。当剩余寿命低于预设值时,我们发出“寿命即将到期”的警报。 请注意,这只是一个简单的示例代码,需要根据具体情况进行修改和优化。例如,您可能需要使用更精确的定时器或添加更复杂的逻辑来控制继电器。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值