Given a positive integer, output its complement number. The complement strategy is to flip the bits of its binary representation.
Note:
The given integer is guaranteed to fit within the range of a 32-bit signed integer.
You could assume no leading zero bit in the integer’s binary representation.
- My train of thought:
一开始就想用位运算搞定吧,但是发现好像不行hh,顺便复习了一下负数补码的概念
note:负数在C语言中以补码形式存储,计算原码真值时,应减一再取反(不包括符号位)
比如说 int型整数 5,取反~5之后,得到的值是-6
0000,101->1111,010,这样虽然数值位取反了,但是输出结果并不对。
没有往复杂了想,盯了一会儿草稿纸,发现其实101+010=111,so,111-101=010,达成目标!
- My solution:
int findComplement(int num) {
int org,comp,dist=0,a;
org=num;
while(num>1)
{
dist++;
num=num/2;
}
dist++;
a=(int)pow(2,dist)-1;
comp=a-org;
return comp;
}
run time: 3ms
- Better Solution
class Solution {
public:
int findComplement(int num) {
unsigned mask = ~0;
while (num & mask) mask <<= 1;
return ~mask & ~num;
}
};
关于unsigned
整型的每一种都分有无符号(unsigned)和有符号(signed)两种类型(float和double总是带符号的),unsigned n,则n的最高位不表示符号
unsigned mask = ~0;/*mask=11111 111*/
while (num & mask) /*num的位数*/
mask <<= 1;/*mask=11111 000*/
关于<< >>
左移运算符“<<”把“运算数的各二进位全部左移若干位由“<<”右边的数指定移动的位数,高位丢弃,低位补0。
对于有符号数,在右移时,符号位将随同移动。当为正数时, 最高位补0,而为负数时,符号位为1,最高位是补0或是补1 取决于编译系统的规定。
这里发现其实在使用<<时,是没有必要使用unsigned的,但是这是个好习惯,可以不用特意再去区分左移还是右移。
~mask & ~num;/*00000 111 & 11111 010*/
到这一步才真的明白意图,按照我原本的思路,5取反之后是-6,因为有符号位,想到这我就放弃了,但其实应该进一步往下想,要保留数值位,把符号位取反的策略,就是要构造一个符号位全为0,数值位全为1的二进制数。
while循环的作用是算出数值位的位数,又可以直接得到构造的数,非常巧妙了。