1、EDP屏调试:
&edp {
status = "okay";
};
&edp_panel {
compatible = "simple-panel";
backlight = <&backlight>;
enable-gpios = <&gpio7 13 GPIO_ACTIVE_HIGH>;
enable-delay-ms = <120>;
prepare-delay-ms = <200>; //上电时序延时加大解决uboot出现Aux通信出错
bus-format = <MEDIA_BUS_FMT_RGB888_1X24>;
power-supply = <&vcc_lcd>;
status = "okay";
disp_timings: display-timings {
native-mode = <&timing0>;
timing0: timing0 {
clock-frequency = <141000000>;
hactive = <1920>;
vactive = <1080>;
hfront-porch = <30>;
hsync-len = <5>;
hback-porch = <153>;
vfront-porch = <15>;
vsync-len = <1>;//8
vback-porch = <20>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active &#