- 前言
相信很多刚接触AndroidTV开发的开发者，都会被各种焦点问题给折磨的不行。不管是学技术还是学习其他知识，都要学习和理解其中原理，碰到问题我们才能得心应手。下面就来探一探Android的焦点分发的过程。
- Android焦点分发，拦截过程的实现
Android焦点事件的分发是从ViewRootImpl的processKeyEvent开始的，源码如下：
private int processKeyEvent(QueuedInputEvent q) {
final KeyEvent event = (KeyEvent)q.mEvent;
// Deliver the key to the view hierarchy.
if (mView.dispatchKeyEvent(event)) {
return FINISH_HANDLED;
}
if (shouldDropInputEvent(q)) {
return FINISH_NOT_HANDLED;
}
// If the Control modifier is held, try to interpret the key as a shortcut.
if (event.getAction() == KeyEvent.ACTION_DOWN
&& event.isCtrlPressed()
&& event.getRepeatCount() == 0
&& !KeyEvent.isModifierKey(event.getKeyCode())) {
if (mView.dispatchKeyShortcutEvent(event)) {
return FINISH_HANDLED;
}
if (shouldDropInputEvent(q)) {
return FINISH_NOT_HANDLED;
}
}
// Apply the fallback event policy.
if (mFallbackEventHandler.dispatchKeyEvent(event)) {
return FINISH_HANDLED;
}
if (shouldDropInputEvent(q)) {
return FINISH_NOT_HANDLED;
}
// Handle automatic focus changes.
if (event.getAction() == KeyEvent.ACTION_DOWN) {
int direction = 0;
switch (event.getKeyCode()) {
case KeyEvent.KEYCODE_DPAD_LEFT:
if (event.hasNoModifiers()) {
direction = View.FOCUS_LEFT;
}
break;
case KeyEvent.KEYCODE_DPAD_RIGHT:
if (event.hasNoModifiers()) {
direction = View.FOCUS_RIGHT;
}
break;
case KeyEvent.KEYCODE_DPAD_UP:
if (event.hasNoModifiers()) {
direction = View.FOCUS_UP;
}
break;
case KeyEvent.KEYCODE_DPAD_DOWN:
if (event.hasNoModifiers()) {
direction = View.FOCUS_DOWN;
}
break;
case KeyEvent.KEYCODE_TAB:
if (event.hasNoModifiers()) {
direction = View.FOCUS_FORWARD;
} else if (event.hasModifiers(KeyEvent.META_SHIFT_ON)) {
direction = View.FOCUS_BACKWARD;
}
break;
}
if (direction != 0) {
View focused = mView.findFocus();
if (focused != null) {
View v = focused.focusSearch(direction);
if (v != null && v != focused) {
// do the math the get the interesting rect
// of previous focused into the coord system of
// newly focused view
focused.getFocusedRect(mTempRect);
if (mView instanceof ViewGroup) {
((ViewGroup) mView).offsetDescendantRectToMyCoords(
focused, mTempRect);
((ViewGroup) mView).offsetRectIntoDescendantCoords(
v, mTempRect);
}
if (v.requestFocus(direction, mTempRect)) {
playSoundEffect(SoundEffectConstants
.getContantForFocusDirection(direction));
return FINISH_HANDLED;
}
}
// Give the focused view a last chance to handle the dpad key.
if (mView.dispatchUnhandledMove(focused, direction)) {
return FINISH_HANDLED;
}
} else {
// find the best view to give focus to in this non-touch-mode with no-focus
View v = focusSearch(null, direction);
if (v != null && v.requestFocus(direction)) {
return FINISH_HANDLED;
}
}
}
}
return FORWARD;
}
源码比较长，下面我就慢慢来讲解一下具体的每一个细节。
* (1) 首先由dispatchKeyEvent进行焦点的分发，如果dispatchKeyEvent方法返回true，那么下面的焦点查找步骤就不会继续了。
dispatchKeyEvent方法返回true代表焦点事件被消费了。
// Deliver the key to the view hierarchy.
if (mView.dispatchKeyEvent(event)) {
return FINISH_HANDLED;
}- 首先会执行mView的dispatchKeyEvent方法，估计大家会好奇这个mView是个什么鬼？其实它就是Activity的顶层容器DecorView，它是一FrameLayout。所以这里的dispatchKeyEvent方法应该执行的是ViewGroup的dispatchKeyEvent()方法，而不是View的dispatchKeyEvent方法。
ViewGroup的dispatchKeyEvent()方法的源码如下：
@Override
public boolean dispatchKeyEvent(KeyEvent event) {
if (mInputEventConsistencyVerifier != null) {
mInputEventConsistencyVerifier.onKeyEvent(event, 1);
}
if ((mPrivateFlags & (PFLAG_FOCUSED | PFLAG_HAS_BOUNDS))
== (PFLAG_FOCUSED | PFLAG_HAS_BOUNDS)) {
if (super.dispatchKeyEvent(event)) {
return true;
}
} else if (mFocused != null && (mFocused.mPrivateFlags & PFLAG_HAS_BOUNDS)
== PFLAG_HAS_BOUNDS) {
if (mFocused.dispatchKeyEvent(event)) {
return true;
}
}
if (mInputEventConsistencyVerifier != null) {
mInputEventConsistencyVerifier.onUnhandledEvent(event, 1);
}
return false;
}（2）ViewGroup的dispatchKeyEvent执行流程
首先ViewGroup会一层一层往上执行父类的dispatchKeyEvent方法，如果返回true那么父类的dispatchKeyEvent方法就会返回true，也就代表父类消费了该焦点事件，那么焦点事件自然就不会往下进行分发。
然后ViewGroup会判断mFocused这个view是否为空，如果为空就会return false，焦点继续往下传递；如果不为空，那就会return mFocused的dispatchKeyEvent方法返回的结果。这个mFocused是什么呢？其实
是ViewGroup中当前获取焦点的子View，这个可以从requestChildFocus方法中得到答案。requestChildFocus()的源码如下：
@Override
public void requestChildFocus(View child, View focused) {
if (DBG) {
System.out.println(this + " requestChildFocus()");
}
if (getDescendantFocusability() == FOCUS_BLOCK_DESCENDANTS) {
return;
}
// Unfocus us, if necessary
super.unFocus(focused);
// We had a previous notion of who had focus. Clear it.
if (mFocused != child) {
if (mFocused != null) {
mFocused.unFocus(focused);
}
mFocused = child;
}
if (mParent != null) {
mParent.requestChildFocus(this, focused);
}
}
（3）下面再来瞧瞧view的dispatchKeyEvent方法的具体的执行过程
public boolean dispatchKeyEvent(KeyEvent event) {
if (mInputEventConsistencyVerifier != null) {
mInputEventConsistencyVerifier.onKeyEvent(event, 0);
}
// Give any attached key listener a first crack at the event.
//noinspection SimplifiableIfStatement
ListenerInfo li = mListenerInfo;
if (li != null && li.mOnKeyListener != null && (mViewFlags & ENABLED_MASK) == ENABLED
&& li.mOnKeyListener.onKey(this, event.getKeyCode(), event)) {
return true;
}
if (event.dispatch(this, mAttachInfo != null
? mAttachInfo.mKeyDispatchState : null, this)) {
return true;
}
if (mInputEventConsistencyVerifier != null) {
mInputEventConsistencyVerifier.onUnhandledEvent(event, 0);
}
return false;
}惊奇的发现执行了onKeyListener中的onKey方法，如果onKey方法返回true，那么dispatchKeyEvent方法也会返回true
可以得出结论：如果想要修改ViewGroup焦点事件的分发，可以这么干：
- 重写view的dispatchKeyEvent方法
- 给某个子view设置onKeyListener监听
注意：实际开发中，理论上所有焦点问题都可以通过给dispatchKeyEvent方法增加监听来来拦截来控制。
- 焦点没有被dispatchKeyEvent拦截的情况下的处理过程
（1）dispatchKeyEvent方法返回false后，先得到按键的方向direction值，这个值是一个int类型参数。这个direction值是后面来进行焦点查找的。
// Handle automatic focus changes.
if (event.getAction() == KeyEvent.ACTION_DOWN) {
int direction = 0;
switch (event.getKeyCode()) {
case KeyEvent.KEYCODE_DPAD_LEFT:
if (event.hasNoModifiers()) {
direction = View.FOCUS_LEFT;
}
break;
case KeyEvent.KEYCODE_DPAD_RIGHT:
if (event.hasNoModifiers()) {
direction = View.FOCUS_RIGHT;
}
break;
case KeyEvent.KEYCODE_DPAD_UP:
if (event.hasNoModifiers()) {
direction = View.FOCUS_UP;
}
break;
case KeyEvent.KEYCODE_DPAD_DOWN:
if (event.hasNoModifiers()) {
direction = View.FOCUS_DOWN;
}
break;
case KeyEvent.KEYCODE_TAB:
if (event.hasNoModifiers()) {
direction = View.FOCUS_FORWARD;
} else if (event.hasModifiers(KeyEvent.META_SHIFT_ON)) {
direction = View.FOCUS_BACKWARD;
}
break;
}（2）接着会调用DecorView的findFocus()方法一层一层往下查找已经获取焦点的子View。
ViewGroup的findFocus方法如下：
@Override
public View findFocus() {
if (DBG) {
System.out.println("Find focus in " + this + ": flags="
+ isFocused() + ", child=" + mFocused);
}
if (isFocused()) {
return this;
}
if (mFocused != null) {
return mFocused.findFocus();
}
return null;
}View的findFocus方法
public View findFocus() {
return (mPrivateFlags & PFLAG_FOCUSED) != 0 ? this : null;
}说明：判断view是否获取焦点的isFocused()方法， (mPrivateFlags & PFLAG_FOCUSED) != 0 和view 的isFocused()方法是一致的。
@ViewDebug.ExportedProperty(category = "focus")
public boolean isFocused() {
return (mPrivateFlags & PFLAG_FOCUSED) != 0;
}其中isFocused()方法的作用是判断view是否已经获取焦点，如果viewGroup已经获取到了焦点，那么返回本身即可，否则通过mFocused的findFocus()方法来找焦点。mFocused其实就是ViewGroup中获取焦点的子view，如果mView不是ViewGourp的话，findFocus其实就是判断本身是否已经获取焦点，如果已经获取焦点了，返回本身。
（3）回到processKeyEvent方法中，如果findFocus方法返回的mFocused不为空，说明找到了当前获取焦点的view（mFocused），接着focusSearch会把direction（遥控器按键按下的方向）作为参数，找到特定方向下一个将要获取焦点的view，最后如果该view不为空，那么就让该view获取焦点。
if (direction != 0) {
View focused = mView.findFocus();
if (focused != null) {
View v = focused.focusSearch(direction);
if (v != null && v != focused) {
// do the math the get the interesting rect
// of previous focused into the coord system of
// newly focused view
focused.getFocusedRect(mTempRect);
if (mView instanceof ViewGroup) {
((ViewGroup) mView).offsetDescendantRectToMyCoords(
focused, mTempRect);
((ViewGroup) mView).offsetRectIntoDescendantCoords(
v, mTempRect);
}
if (v.requestFocus(direction, mTempRect)) {
playSoundEffect(SoundEffectConstants
.getContantForFocusDirection(direction));
return FINISH_HANDLED;
}
}
// Give the focused view a last chance to handle the dpad key.
if (mView.dispatchUnhandledMove(focused, direction)) {
return FINISH_HANDLED;
}
} else {
// find the best view to give focus to in this non-touch-mode with no-focus
View v = focusSearch(null, direction);
if (v != null && v.requestFocus(direction)) {
return FINISH_HANDLED;
}
}
}（4）focusSearch方法的具体实现。
focusSearch方法的源码如下：
@Override
public View focusSearch(View focused, int direction) {
if (isRootNamespace()) {
// root namespace means we should consider ourselves the top of the
// tree for focus searching; otherwise we could be focus searching
// into other tabs. see LocalActivityManager and TabHost for more info
return FocusFinder.getInstance().findNextFocus(this, focused, direction);
} else if (mParent != null) {
return mParent.focusSearch(focused, direction);
}
return null;
}
可以看出focusSearch其实是一层一层地网上调用父View的focusSearch方法，直到当前view是根布局（isRootNamespace()方法），通过注释可以知道focusSearch最终会调用DecorView的focusSearch方法。而DecorView的focusSearch方法找到的焦点view是通过FocusFinder来找到的。
@Override
public View focusSearch(View focused, int direction) {
if (isRootNamespace()) {
// root namespace means we should consider ourselves the top of the
// tree for focus searching; otherwise we could be focus searching
// into other tabs. see LocalActivityManager and TabHost for more info
return FocusFinder.getInstance().findNextFocus(this, focused, direction);
} else if (mParent != null) {
return mParent.focusSearch(focused, direction);
}
return null;
}（5）FocusFinder是什么？
它其实是一个实现 根据给定的按键方向，通过当前的获取焦点的View，查找下一个获取焦点的view这样算法的类。焦点没有被拦截的情况下，Android框架焦点的查找最终都是通过FocusFinder类来实现的。
（6）FocusFinder是如何通过findNextFocus方法寻找焦点的。
下面就来看看FocusFinder类是如何通过findNextFocus来找焦点的。一层一层往下看，后面会执行findNextUserSpecifiedFocus()方法，这个方法会执行focused(即当前获取焦点的View)的findUserSetNextFocus方法，如果该方法返回的View不为空，且isFocusable = true && isInTouchMode() = true的话，FocusFinder找到的焦点就是findNextUserSpecifiedFocus()返回的View。
private View findNextUserSpecifiedFocus(ViewGroup root, View focused, int direction) {
// check for user specified next focus
View userSetNextFocus = focused.findUserSetNextFocus(root, direction);
if (userSetNextFocus != null && userSetNextFocus.isFocusable()
&& (!userSetNextFocus.isInTouchMode()
|| userSetNextFocus.isFocusableInTouchMode())) {
return userSetNextFocus;
}
return null;
}（7）findNextFocus会优先根据XML里设置的下一个将获取焦点的View ID值来寻找将要获取焦点的View。
看看View的findUserSetNextFocus方法内部都干了些什么，OMG不就是通过我们xml布局里设置的nextFocusLeft，nextFocusRight的viewId来找焦点吗，如果按下Left键，那么便会通过nextFocusLeft值里的View Id值去找下一个获取焦点的View。
View findUserSetNextFocus(View root, @FocusDirection int direction) {
switch (direction) {
case FOCUS_LEFT:
if (mNextFocusLeftId == View.NO_ID) return null;
return findViewInsideOutShouldExist(root, mNextFocusLeftId);
case FOCUS_RIGHT:
if (mNextFocusRightId == View.NO_ID) return null;
return findViewInsideOutShouldExist(root, mNextFocusRightId);
case FOCUS_UP:
if (mNextFocusUpId == View.NO_ID) return null;
return findViewInsideOutShouldExist(root, mNextFocusUpId);
case FOCUS_DOWN:
if (mNextFocusDownId == View.NO_ID) return null;
return findViewInsideOutShouldExist(root, mNextFocusDownId);
case FOCUS_FORWARD:
if (mNextFocusForwardId == View.NO_ID) return null;
return findViewInsideOutShouldExist(root, mNextFocusForwardId);
case FOCUS_BACKWARD: {
if (mID == View.NO_ID) return null;
final int id = mID;
return root.findViewByPredicateInsideOut(this, new Predicate<View>() {
@Override
public boolean apply(View t) {
return t.mNextFocusForwardId == id;
}
});
}
}
return null;
}
可以得出以下结论：
1. 如果一个View在XML布局中设置了focusable = true && isInTouchMode = true，那么这个View会优先获取焦点。
2. 通过设置nextFocusLeft，nextFocusRight，nextFocusUp，nextFocusDown值可以控制View的下一个焦点。
Android焦点的原理实现就这些。总结一下：
首先DecorView会调用dispatchKey一层一层进行焦点的分发，如果dispatchKeyEvent方法返回true的话，那么焦点就不会往下分发了。
中途可以给某个子View设置OnKeyListener进行焦点的拦截。
如果焦点没有被拦截的话，那么焦点就会交给系统来处理
Android底层先会记录按键的方向，后面DecorView会一层一层往下调用findFocus方法找到当前获取焦点的View
后面系统又会根据按键的方向，执行focusSearch方法来寻找下一个将要获取焦点的View
focusSearch内部其实是通过FocusFinder来查找焦点的。FocusFinder会优先通过View在XML布局设置的下一个焦点的ID来查找焦点。
最终如果找到将要获取焦点的View，就让其requestFocus。
8121
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
