IT6664: 1-to-4 HDMI 2.0/MHL Dual in Active Splitter with EDID RAM

The IT6664 is a one-to-four HDMI 2/MHL dual-in, HDMI 2 out active splitter that supports a signaling rate up to 6.0 Gbps per channel. 
IT6664是一款一对四HDMI 2/MHL双入，HDMI 2出有源分配器，支持每通道高达6.0 Gbps的信号速率。

It is compatible with the latest HDMI 2.0, MHL 2.2, and HDCP 2.2 specifications. 
它兼容最新的HDMI 2.0, MHL 2.2和HDCP 2.2规范。

The 6.0 Gbps bandwidth capability of IT6664 allows it to support content stream such as the popular ultra-high definition 4K x 2K 60 Hz format, 3D video with 4K x 2K@30 Hz, and so on. 
IT6664的6.0 Gbps带宽能力允许它支持内容流，如流行的超高清4K x 2K 60hz格式，4K x 2K@30 Hz的3D视频等。

SCDC data structure is contained in both TX and RX side of IT6664 such that HDMI 2.0 content could be properly received and transmitted to downstream side.
IT6664的TX端和RX端都包含SCDC数据结构，使HDMI 2.0内容能够正常接收并传输到下游端。

To facilitate system design, IT6664 integrates on-chip CSC conversion (including Ycbcr 420/422/444 up or down and RGB/Ycbcr conversion), and 4:1 down-sampling function, such proper video stream could be output to each of the connected display device according to its EDID and cable length.
为了方便系统设计，IT6664集成了片上CSC转换(包括Ycbcr 420/422/444上下转换和RGB/Ycbcr转换)和4:1下采样功能，可以根据所连接的每个显示设备的EDID和电缆长度输出合适的视频流。

The installed HDCP 2.2 engines and keys on both receiving and transmitting side make IT6664 possible to act as an HDCP 2.2/1.converter, eliminating HDCP compatibility issue.
在接收和发送端都安装了HDCP 2.2引擎和密钥，使IT6664可以作为HDCP 2.2/1.x Repeater or an HDCP 2.2 to 1.x中继器或HDCP 2.2到1.x/HDCP 1.x / HDCP 1.x to 2.2 x到2.2转换器，消除HDCP兼容性问题。

Note, the HDCP 2.2 to l.x conversion is restricted for closed system application.
注意，HDCP 2.2到lx的转换仅限于封闭系统应用。

To achieve a friendly remote control environment, the IT6664 provides a complete solution of HDMI CEC function and MHL RCP function as well. 
为了实现友好的远程控制环境，IT6664提供了HDMI CEC功能和MHL RCP功能的完整解决方案。

With IT6664's embedded CEC/RCP hardware, developers could use high-level software API to implement all the necessary remote control commands easily.
使用IT6664的嵌入式CEC/RCP硬件，开发人员可以使用高级软件API轻松实现所有必要的远程控制命令。

The IT6664 equalizes incoming TMDS signal to optimal and outputs retimed data to downstream sinks. 
IT6664将输入的TMDS信号均衡到最佳状态，并将重新定时的数据输出到下游sink。

The highly acclaimed equalization technology of ITE TECH. INC. provides for support of long or low-quality HDMI cables at even the highest speeds. 
ITE TECH. INC.高度赞誉的均衡技术提供了即使在最高速度下也能支持长或低质量的HDMI电缆。

Input terminations of the TMDS inputs and output current levels are both programmable.
TMDS输入端的输入端和输出电流电平都是可编程的。

An EDID RAM is embedded in IT6664 to save the cost of the external EDID ROMs. 
在IT6664中嵌入一个EDID RAM以节省外部EDID rom的成本。

The process of downloading the EDID data into the RAM is simplified by firmware programming.
通过固件编程简化了将EDID数据下载到RAM中的过程。

The IT6664 operates in software mode that allows the system to control it via a two-line serial interface, PCscL/PCSDA. 
IT6664以软件模式运行，允许系统通过双线串行接口PCscL/PCSDA控制它。

Two serial programming addresses can be selected by PCADR.
PCADR可以选择两个串行编程地址。