IT66631: HDMI 2.0-to-HDMI 2.0/TTL Dual Output Converter

IT66631是一款HDMI分配芯片，一路HDMI环出，一路TTL输出。

以下为官网翻译内容：

The IT66631 is a one-to-two, HDMI 2.0 to HDMI 2.0/TTL converter that supports a signaling rate of up to 6.0 Gbps per channel on the HDMI interface. 
IT66631是一个一对二，HDMI 2.0到HDMI 2.0/TTL转换器，支持HDMI接口上每通道高达6.0 Gbps的信号速率。

It is compatible with the latest HDMI 2.0 and HDCP 2.3 specifications. 
它兼容最新的HDMI 2.0和HDCP 2.3规范。

The 18.0 Gbps bandwidth capability of IT66631 allows it to support content stream such as the popular ultra-high definition 4K x 2K 60 Hz format, 3D video with 4K x 2K@30 Hz, and so on. 
IT66631的18.0 Gbps带宽能力使其能够支持诸如流行的超高清4K x 2K 60hz格式的内容流，4K x 2K@30 Hz的3D视频等。

SCDC data structure is contained in both HDMI RX and HDMI TX side of IT66631 such that HDMI 2.0 content could be properly received and transmitted to downstream side. 
IT66631的HDMI RX端和HDMI TX端都包含SCDC数据结构，使HDMI 2.0内容能够正常接收并传输到下游端。

The 48-bit TTL outputs of IT66631 make solutions with HDMI interface and TTL-in video processors possible.
IT66631的48位TTL输出使HDMI接口和TTL视频处理器的解决方案成为可能。

ITo facilitate system design, IT66631 integrates on-chip CsC conversion (including Ycbcr 420/422/444 up or down and RGB/Ycbcr conversion) and 4:1 down-sampling function, and thereby proper video stream could be output to HDMITX and TTL. 
为了方便系统设计，IT66631集成了片上CsC转换(包括Ycbcr 420/422/444上下转换和RGB/Ycbcr转换)和4:1下采样功能，从而可以将适当的视频流输出到HDMITX和TTL。

The 4:1 down-sampling function is especially useful for those applications that include a video path merely capable of displaying 1080p or lower resolutions.
4:1降采样功能对于那些包含仅能显示1080p或更低分辨率的视频路径的应用程序特别有用。

The installed HDCP2.
已安装的HDCP2。

x engines and keys on both HDMI RX/TX make IT66631 possible to act as an HDCP2.x/1.
HDMI RX/TX上的x引擎和键使IT66631可以作为HDCP2.x/1.x Repeater or an HDCP2.x/1.中继器或HDCP2.x/1.x to1.x。

x/legacy converter, eliminating HDCP compatibility issue. 
x/传统转换器，消除HDCP兼容性问题。

Note that the HDCP2.x/l.
注意，HDCP2.x/l。

x/legacy conversion usage is restricted for closedl system applications only.
X /遗留转换的使用仅限于封闭系统应用程序。

The IT66631 equalizes incoming TMDS signal to optimal and outputs retimed data to downstream HDMI sinks. 
IT66631将输入的TMDS信号均衡到最佳，并将重新定时的数据输出到下游的HDMI接收器。

The highly acclaimed equalization technology of ITE TECH. INC. provides support of long or low-quality HDMI cables at even the highest speeds. 
ITE TECH. INC.高度赞誉的均衡技术即使在最高速度下也支持长或低质量的HDMI电缆。

Input terminations of the TMDS inputs and output current levels are both programmable.
TMDS输入端的输入端和输出电流电平都是可编程的。

An EDID RAM is embedded in the IT66631 to save the cost of the external EDID ROMs. 
一个EDID RAM嵌入在IT66631中，以节省外部EDID rom的成本。

The process of downloading the EDID data into the RAM is simplified by firmware programming.
通过固件编程简化了将EDID数据下载到RAM中的过程。

The IT66631 operates in the software mode, allowing the system to control it via a two-line serial interface, PCscL/PCsDA. 
IT66631在软件模式下工作，允许系统通过两线串行接口PCscL/PCsDA控制它。

Two serial programming addresses can be selected by PCADR.
PCADR可以选择两个串行编程地址。