GSV2201 Type-c/DP to HDMI2.0 4K60扩展坞芯片

Gscoolink GSV2201 is a high-performance, low-power, USB Type-C Alternate Mode DisplayPort 1.4 to HDMI 2.0 converter. By integrating enhanced microcontroller, GSV2201 has created a cost-effective solution that provides time-to-market advantages. The DisplayPort Receiver supports up to 32.4Gbps (HBR3, 4-lane) and HDMI Transmitter supports up to 18Gbps (TMDS,

6G3Lane). Integrated Power Delivery 3.0 controller handles Type-C CC interface for USB power management and DisplayPort mode entry. The superior architecture of GSV2201 provides economical smaller footprint solutionsusing QFN64, targeting applications of Type-C Docking,

Type-C dongle and DP to HDMI cable.

DisplayPort Receiver Features

 Compliant with VESA DisplayPort 1.4a

 Compliant with HDCP 2.2/2.3 and HDCP 1.4

 Support HBR3, HBR2, HBR and RBR (8.1/5.4/2.7/1.62 Gbps)

 Flexible 1/2/4 lane Main-Link configuration

 Programmable Adaptive Equalization

 Support Full-Link Training and No-Link Training

 Support High Dynamic Range (HDR) and Dynamic/Static Metadata

 Support Adaptive Sync/FreeSync

 Support Audio Extraction

 Support Horizontal Blanking Expansion up to 4K@60Hz format

 Support Forward Error Correction (FEC)

 Embedded arbitrary EDID and MCCS

 Support Spread Spectrum Clock (SSC)

HDMI Transmitter Features

 Compliant with HDMI 2.0b, HDMI 1.4b

 Compliant with HDCP 2.2/2.3 and HDCP 1.4

 Data rate up to 18Gbps (TMDS 6Gbps/3 Lane)

 Programmable Voltage Swing, Slew-Rate and Pre-emphasis

 Support AC-coupling on TMDS

 Support Color Space Converter

 Support HDR (HDR10/HDR10+/Dolby Vision/HLG)

 Support Variable Refresh Rate (VRR)/FreeSync

 Hardware CEC Engine for Low Level protocol decoding

 5V tolerance on DDC/HPD/CEC pins

USB Type-C Interface Features

 USB Power Delivery 3.0 Compliant controller

 3 Configuration Channels (CC) with built-in Rp/Rd resistors

 Dual Role Power Port (DRP)

 Fast Role Swap

 USB 2.0 full-speed billboard enumeration

Audio Input/Output Features

 I2S and SPDIF Audio Extraction from HDMI Rx

 I2S/SPDIF Audio Insertion to HDMI Tx

 SPDIF/I2S/HBR/DSD/TDM Format Supported for Audio Extraction and Insertion

 SPDIF to I2S Conversion using single TTL bus in Bi-direction

System Features

 Embedded internal MCU

 Optional Internal Flash or External pins of Flash QSPI interface

 External 25MHz Crystal required

 Available Pins for UART/Timer/GPIO

 Temperature Sensor Monitoring Circuit