「解决方案」Acrel-2000Z变电站综合自动化系统

概述

针对用户变电站（一般为35kV及以下电压等级），通过微机保护装置、开关柜综合测控装置、电气接点无线测温产品、电能质量在线监测装置、配电室环境监控设备、弧光保护装置等设备组成综合自动化的综合监控系统，实现了变电、配电、用电的安全运行和管理。监控范围包括用户变电站、开闭所、变电所及配电室等。

For the user substation (generally 35kV and below voltage level), through the microcomputer protection device, switch cabinet comprehensive measurement and control device, electrical contact wireless temperature measurement products, power quality online monitoring device, distribution room environmental monitoring equipment, arc protection device and other equipment to form a comprehensive and automated comprehensive monitoring system, to achieve the safe operation and management of substation, distribution, electricity consumption. The scope of monitoring includes user substations, opening and closing stations, substations and distribution rooms.

Acrel-2000Z变电站综合自动化系统是安科瑞根据电力系统自动化及无人值守的要求，针对35kV及以下电压等级研发出的一套分层分布式变电站监控管理系统。该系统是应用电力自动化技术、计算机技术、网络技术和信息传输技术，集保护、监测、控制、通信等功能于一体的开放式、网络化、单元化、组态化的系统，适用于35kV及以下电压等级的城网、农网变电站和用户变电站，可实现对变电站的控制和管理，满足变电站无人或少人值守的需求，为变电站安全、稳定、经济运行提供了坚实的保障。

Acrel-2000Z substation integrated automation system is a set of hierarchical distributed substation monitoring and management system developed by Ankerui according to the requirements of power system automation and unattended, for voltage levels of 35kV and below. The system is the application of power automation technology, computer technology, network technology and information transmission technology, set protection, monitoring, control, communication and other functions in one of the open, networked, unitary, configuration of the system, suitable for 35kV and below voltage level of urban network, rural network substation and user substation, can realize the control and management of the substation, to meet the substation unmanned or less manned demand, for the substation safety, stability, economic operation provides a solid guarantee.

02

应用场所

电网；数据中心；市政工程；化学工业；交通行业；工矿企业；石油行业；冶金工业

Power grid; data center; municipal engineering; chemical industry; transportation industry; industrial and mining enterprises; petroleum industry; metallurgical industry

03

系统结构

04

系统功能

4.1 实时监测

系统人机界面友好，能够以配电一次图的形式直观显示配电线路的运行状态，实时监测各回路电压、电流、功率、功率因数等电参数信息，动态监视各配电回路断路器、隔离开关、地刀合分闸状态及有关故障、告警等信号。其中，10kV配电系统中监测的开关量主要有：断路器分合闸信号、手车工作、试验位置信号，远方/就地切换位置信号、弹簧储能状态信号、接地刀合分信号、变压器超温跳闸信号、高温信号，保护跳闸信号和事故预告信号；400V低压进线回路电参量主要有：开关状态、三相电流、三相电压、总有功功率、总无功功率、总功率因数、频率和正向有功电能累计值；400V低压出线回路主要有：开关状态、断路器故障脱扣告警、三相（单相）电流、三相功率。

The system has a friendly man-machine interface, which can intuitively display the operating status of the distribution line in the form of a power distribution diagram, monitor the electrical parameter information such as voltage, current, power, and power factor of each circuit in real time, and dynamically monitor the circuit breaker, isolator, ground knife and split gate status and signals related to faults and alarms. Among them, the switching quantity monitored in the 10kV distribution system mainly includes: circuit breaker closing signal, handcart work, test position signal, remote/local switching position signal, spring energy storage status signal, grounding knife joint signal, transformer over-temperature trip signal, high temperature signal, protection trip signal and accident warning signal; 400V low-voltage inlet loop electrical parameters mainly include: switching state, three-phase current, three-phase voltage, total active power, total reactive power, total power factor, frequency and positive active energy cumulative value The 400V low-voltage outlet loop mainly includes: switching status, circuit breaker fault trip alarm, three-phase (single-phase) current, three-phase power.

4.2 电参量查询

在主接线图中，可以直接查看该回路所有的电参量，包括三相电流、三相电压、三相总有功功率、总无功功率、总功率因数、有功电能等。

In the main wiring diagram, you can directly view all the electrical parameters of the loop, including three-phase current, three-phase voltage, three-phase total active power, total reactive power, total power factor, active energy, etc.

4.3 曲线查询

在曲线查询界面，可以直接查看各电参量曲线，包括三相电流、三相电压、有功功率、无功功率、功率因数等曲线。

In the curve query interface, you can directly view the curves of each electrical parameter, including three-phase current, three-phase voltage, active power, reactive power, power factor and other curves.

4.4 运行报表

查询各回路或设备指定时间的运行参数，报表中显示电参量信息应包括：各相电流、三相电压、总功率因数、总有功功率、总无功功率、正向有功电能等。

Query the operating parameters of each circuit or equipment at a specified time, and the electrical parameter information displayed in the report should include: each phase current, three-phase voltage, total power factor, total active power, total reactive power, forward active energy, etc.

系统具备定时抄表汇总统计功能，用户可以自由查询自系统正常运行以来任意时间段内各配电节点的用电情况，即该节点进线用电量与各分支回路消耗电量的统计分析报表。

The system has the function of timed meter reading summary statistics, and users can freely query the power consumption of each distribution node in any period of time since the normal operation of the system, that is, the statistical analysis report of the inlet line power consumption of the node and the consumption of each branch circuit.

4.5 实时告警

系统具有实时告警功能，系统能够对配电回路断路器、隔离开关、接地刀分、合动作等遥信变位，保护动作、事故跳闸等事件发出告警。

The system has a real-time alarm function, the system can send alarms to remote messages such as distribution circuit breakers