一、环境准备
- Centos 6.5 三台 （192.168.206.5 192.168.206.6 192.168.206.7）
- Zookeeper: 3.4.6 左右
- JDK: JDK1.8+ 左右
- Mysql：5.1.47+
二、准备工作
1、配置host (三台)
[root@master03 ~]# cat >>/etc/hosts<<EOF
192.168.206.5 node1
192.168.206.6 node2
192.168.206.7 node3
EOF2、安装openjdk
安装此处略过
[root@master01 ~]# which java
/bin/java
[root@master01 ~]#
[root@master01 ~]# ll /bin/java
lrwxrwxrwx 1 root root 23 7月 18 09:40 /bin/java -> /data/java/jre/bin/java
[root@master01 ~]#
[root@master01 ~]# java -version
java version "1.8.0_181"
Java(TM) SE Runtime Environment (build 1.8.0_181-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.181-b13, mixed mode)
3、Zookeeper集群
(node1操作)
下载 apache-zookeeper-3.6.4-bin
cd /opt/src
sz apache-zookeeper-3.6.4-bin.tar.gz
tar -zxvf apache-zookeeper-3.6.4-bin.tar.gz
mv apache-zookeeper-3.6.4-bin /opt/
ln -s apache-zookeeper-3.6.4-bin/ zookeeper
cd /opt/zookeeper/conf
cp -r zoo_sample.cfg zoo.cfgvi zoo.cfg
dataDir=/opt/zookeeper/var/data
dataLogDir=/opt/zookeeper/var/datalog
clientPort=2181
server.1=node1:2888:3888
server.2=node2:2888:3888
server.3=node3:2888:3888grep -v "^#\|^$" zoo.cfg
tickTime=2000
initLimit=10
syncLimit=5
dataDir=/opt/zookeeper/var/data
dataLogDir=/opt/zookeeper/var/datalog
clientPort=2181
server.1=node1:2888:3888
server.2=node2:2888:3888
server.3=node3:2888:3888
scp -r apache-zookeeper-3.6.4-bin/ node2:/opt/
scp -r apache-zookeeper-3.6.4-bin/ node3:/opt/
(node2 node3 操作)
cd /opt/src
ln -s apache-zookeeper-3.6.4-bin/ zookeeper(node1 node2 node3 操作)
启动
cd /opt/zookeeper/bin
./zkServer.sh start查看状态
cd /opt/zookeeper/bin
./zkServer.sh status
4、配置免密
DolphinScheduler 集群默认的启动脚本是 start-all.sh，看名字就是启动一个节点，所有的节点都会启动，他是通过 ssh 启动其他节点，故需要配置免密
（node1 node2 node3 ）
[root@ jerry7-11 ~]# ssh-keygen -t rsa //默认指定算法的是rsa，可以没有-t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
//保存私钥的路径默认/root/.ssh/id_rsa，可以指定生成地址
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase): //密码
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa. 生成私钥
Your public key has been saved in /root/.ssh/id_rsa.pub. 生成公钥
The key fingerprint is:
SHA256:PXTg9KW4P582PWJMEwUstPfyXk6NWdrB518yCORbisc root@hdss7-11
The key's randomart image is:
+---[RSA 2048]----+
| +...o |
| o =.+ . |
| =.=.. |
| = o..o |
| S * ...+o|
| o B +oB+|
| . E * BoB|
| . *+B=|
| ..+o+|
+----[SHA256]-----+
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@192.168.206.5
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@192.168.206.6
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@192.168.206.7
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@node1
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@node2
[root@master01 ~]# ssh-copy-id -i /root/.ssh/id_rsa.pub -p22 root@node3
5、部署mysql
此处略，借鉴 Linux（CentOS 7）下安装 MySQL 8.0.31_centos 使用yum安装mysql8.0.31-CSDN博客
6、下载DolphinScheduler
（node1 操作）
此处略，去官网下载 apache-dolphinscheduler-2.0.0-alpha-bin.tar.gz
cd /opt/src
rz apache-dolphinscheduler-2.0.0-alpha-bin.tar.gz
tar -zxf apache-dolphinscheduler-2.0.0-alpha-bin.tar.gz
7、下载mysql-connector-java.jar驱动
去官网 MySQL :: MySQL Downloads，点击下方的Mysql Community Downloads。
然后单击选择 Connector/J选项:
点击 Archives
选择数据库版本，随后点击 Platform Independent 选项
下载等待压缩包下载完毕即可：
cd /opt/src
rz mysql-connector-j-8.0.31.zip
unzip mysql-connector-j-8.0.31.zip
cd /opt/src/mysql-connector-j-8.0.31
mv mysql-connector-j-8.0.31.jar mysql-connector-java-8.0.31.jar三、部署DolphinScheduler
3.1、DolphinSchedule源数据库配置
（node1 操作）
1、创建数据库
在安装mysql的节点创建Dolphin的元数据库
mysql> CREATE DATABASE dolphinscheduler DEFAULT CHARACTER SET utf8 DEFAULT COLLATE utf8_general_ci; -- 创建数据库并指定编码格式
开启权限
create USER 'dolphinscheduler'@'%' IDENTIFIED WITH mysql_native_password BY '123456';
grant all on dolphinscheduler.* to 'dolphinscheduler'@'%';
flush privileges;
注意事项：要用root账户操作低版本
-- 赋权
mysql> GRANT ALL PRIVILEGES ON dolphinscheduler.* TO '用户名'@'%' IDENTIFIED BY '密码';
-- 如果提示'Your password does not satisfy the current policy requirements'就说明这个密码不符当前的密码策略,可以执行如下命令
mysql> set global validate_password_policy=LOW; -- 验证密码等级强度
mysql> set global validate_password_length=6; -- 设置密码长度
mysql> flush privileges; -- 刷新权限
3.2、DolphinScheduler配置及安装
3.2.1 驱动配置
cp /opt/src/mysql-connector-j-8.0.31/mysql-connector-java-8.0.31.jar /opt/src/apache-dolphinscheduler-2.0.0-alpha-bin/lib/
3.2.2 配置文件修改
3.2.2.1 修改数据源配置
-
修改
conf目录下的datasource.properties配置文件]vi datasource.properties #修改内容如下 # datasource configuration #spring.datasource.driver-class-name=org.postgresql.Driver #spring.datasource.url=jdbc:postgresql://127.0.0.1:5432/dolphinscheduler #spring.datasource.username=root #spring.datasource.password=root # mysql 因为这里使用的mysql作为元数据库,所以要将上面postgresql的配置注释掉 spring.datasource.driver-class-name=com.mysql.jdbc.Driver spring.datasource.url=jdbc:mysql://192.168.206.5:3306/dolphinscheduler?characterEncoding=UTF-8&allowMultiQueries=true spring.datasource.username=dolphinscheduler spring.datasource.password=123456 #保存退出即可 -
执行脚本初始化元数据
dolphin已经为我们准备了初始化元数据库的脚本,执行
script目录下的create-dolphinscheduler.sh脚本即可./create-dolphinscheduler.sh # 如果在部署完所有的步骤后,访问DolphinScheduler界面创建项目时,发现提示元数据库缺少字段,可以不通过create-dolphinscheduler.sh这个脚本初始化元数据库,可以将/opt/apps/apache-dolphinscheduler-2.0.0-alpha-bin/sql这个目录下的dolphinscheduler_mysql.sql这个文件在mysql中直接执行用来创建元数据表,在mysql中执行命令:source //opt/apps/apache-dolphinscheduler-2.0.0-alpha-bin/dolphinscheduler_mysql.sql执行完成后移可以去我们已经在mysql建立的dolphinscheduler库中查看一下
mysql> show tables; +----------------------------------------+ | Tables_in_dolphinscheduler | +----------------------------------------+ | QRTZ_BLOB_TRIGGERS | | QRTZ_CALENDARS | | QRTZ_CRON_TRIGGERS | | QRTZ_FIRED_TRIGGERS | | QRTZ_JOB_DETAILS | | QRTZ_LOCKS | | QRTZ_PAUSED_TRIGGER_GRPS | | QRTZ_SCHEDULER_STATE | | QRTZ_SIMPLE_TRIGGERS | | QRTZ_SIMPROP_TRIGGERS | | QRTZ_TRIGGERS | | t_ds_access_token | | t_ds_alert | | t_ds_alert_plugin_instance | | t_ds_alertgroup | | t_ds_command | | t_ds_datasource | | t_ds_environment | | t_ds_environment_worker_group_relation | | t_ds_error_command | | t_ds_master_server | | t_ds_plugin_define | | t_ds_process_definition | -- 这里就不全部展示了
3.2.2.2 修改各组件环境变量
这里用到什么组件就修改什么就可了,没有使用到的组件可直接注释掉,修改/conf/env目录下的dolphinscheduler_env.sh配置文件
export HADOOP_HOME=/opt/apps/hadoop
export HADOOP_CONF_DIR=/opt/apps/hadoop/etc/hadoop
export SPARK_HOME1=/opt/apps/spark1
export SPARK_HOME2=/opt/apps/spark2
export PYTHON_HOME=/opt/apps/python
export JAVA_HOME=/data/java
export HIVE_HOME=/opt/apps/hive
export FLINK_HOME=/opt/apps/flink
export DATAX_HOME=/opt/apps/datax
export PATH=$HADOOP_HOME/bin:$SPARK_HOME1/bin:$SPARK_HOME2/bin:$PYTHON_HOME/bin:$JAVA_HOME/bin:$HIVE_HOME/bin:$FLINK_HOME/bin:$DATAX_HOME/bin:$PATH
3.2.2.3修改Dolphin安装配置
-
修改
/conf/config目录下的install_config.conf配置文件，案例如下vi ./install_config.conf # 文件内容如下 # # Licensed to the Apache Software Foundation (ASF) under one or more # contributor license agreements. See the NOTICE file distributed with # this work for additional information regarding copyright ownership. # The ASF licenses this file to You under the Apache License, Version 2.0 # (the "License"); you may not use this file except in compliance with # the License. You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. # # --------------------------------------------------------- # INSTALL MACHINE # --------------------------------------------------------- # Dolphin服务所要部署的节点,ips后面可加主机名或者直接加ip地址 ips="lx01,lx02,lx03" # ssh端口号,一般默认为22,不用修改 sshPort="22" # master服务所在节点 masters="lx01,lx02" # worker服务所在节点,并指定所属worker组,这里指定default组 workers="lx01:default,lx02:default,lx03:default" # alter服务(报警服务)所在节点,单节点就可以 alertServer="lx03" # api服务(后端api服务)所在节点,单节点就可以 apiServers="lx01" # DS安装位置,三个节点都要有这个目录 installPath="/opt/apps/dolphinscheduler" # 使用哪个用户进行安装部署,这里就直接使用root,如果使用别的用户进行安装部署需要对该用户进行授权 deployUser="root" # DolphinScheduler本地数据的存储目录,三个节点都要有这个目录 dataBasedirPath="/opt/data/dolphin" # JAVA环境变量的物理路径 javaHome="/opt/apps/jdk1.8" # API后端服务的端口号同时也是web页面访问的端口号,根据实际需求进行配置 apiServerPort="12345" # 所使使用的数据库类型,选择mysql或者postgresql,这里使用mysql dbtype="mysql" # mysql服务所在节点及端口号 dbhost="lx01:3306" # mysql的用户名 username="用户名" # mysql的密码 password="密码" # 在mysql中所使用的库名,就是之前已经配置好的dolphin的元数据库 dbname="dolphinscheduler" # 注册服务插件jar包位置,这个默认即可 registryPluginDir="lib/plugin/registry/zookeeper" # 注册服务名称,默认即可 registryPluginName="zookeeper" # 注册服务位置,将ip地址换成zoopeeker集群的位置即可,可以写ip地址或者主机名 registryServers="lx01:2181,lx02:2181,lx03:2181" # Dolphin在zookeeper中注册的位置,默认即可 zkRoot="/dolphinscheduler" # 警报服务插件jar包位置,默认即可 alertPluginDir="lib/plugin/alert" # 任务调度插件jar包位置,默认即可 taskPluginDir="lib/plugin/task" # 资源存储类型: HDFS, S3, NONE,这里选择hdfs,如果选择NONE则是使用本地文件系统 resourceStorageType="HDFS" # 资源存储位置,因为上面选择的存储类型是HDFS,这个路径就是HDFS上的路径,要确保存在这个路径,并且Dolphin具备读写权限 resourceUploadPath="/dolphinscheduler" # 默认文件系统,如果选择了HDFS并且HDFS已经开启了HA那么就要将core-site.xml和hdfs-site.xml放入到conf目录下 defaultFS="hdfs://lx01:8020" # 没有使用到s3,这个就可以注释掉,如果使用的s3再另行配置 # s3Endpoint="http://192.168.xx.xx:9010" # s3AccessKey="xxxxxxxxxx" # s3SecretKey="xxxxxxxxxx" # yarn的resourcemanager http端口号 resourceManagerHttpAddressPort="8088" # 如resourcemanager HA启用，则配置为ResourceManager节点的主备ip或者hostname,比如"192.168.xx.xx,192.168.xx.xx";如果是单ResourceManager请配置yarnHaIps=""即可 yarnHaIps="192.168.xx.xx,192.168.xx.xx" # 如果ResourceManager是HA或者没有使用到Yarn保持默认值"yarnIp1"即可；如果是单ResourceManager，请配置真实的ResourceManager主机名或者ip singleYarnIp="lx01" # 使用哪个用户对hdfs文件系统进行操作,一般我们要选一个权限比较高的 hdfsRootUser="hdfs" # 关于kerberos根据实际情况配置即可,如果开启了kerberos就根据实际情况配置,没有开启则不用动 # kerberos config # whether kerberos starts, if kerberos starts, following four items need to config, otherwise please ignore kerberosStartUp="false" # kdc krb5 config file path krb5ConfPath="$installPath/conf/krb5.conf" # keytab username,watch out the @ sign should followd by \\ keytabUserName="hdfs-mycluster\\@ESZ.COM" # username keytab path keytabPath="$installPath/conf/hdfs.headless.keytab" # kerberos expire time, the unit is hour kerberosExpireTime="2" # 是否使用sudo,默认为true就可 sudoEnable="true" # 工作租户自动创建,默认为false即可 workerTenantAutoCreate="false"博主配置如下
[root@master01 config]# grep -v "^#\|^$" install_config.conf ips="node1,node2,node3" sshPort="22" masters="node1,node2" workers="node1:default,node2:default,node3:default" alertServer="node3" apiServers="node1" installPath="/opt/apps/dolphinscheduler" deployUser="dolphinscheduler" dataBasedirPath="/data/dolphin" javaHome="/data/java" apiServerPort="12345" dbtype="mysql" dbhost="192.168.206.5:3306" username="dolphinscheduler" password="123456" dbname="dolphinscheduler" registryPluginDir="lib/plugin/registry/zookeeper" registryPluginName="zookeeper" registryServers="192.168.206.5:2181,192.168.206.6:2181,192.168.206.7:2181" zkRoot="/dolphinscheduler" alertPluginDir="lib/plugin/alert" taskPluginDir="lib/plugin/task" resourceStorageType="NONE" resourceUploadPath="/dolphinscheduler" defaultFS="hdfs://node1:8020" resourceManagerHttpAddressPort="8088" yarnHaIps="" singleYarnIp="node1" hdfsRootUser="hdfs" kerberosStartUp="false" krb5ConfPath="$installPath/conf/krb5.conf" keytabUserName="hdfs-mycluster\\@ESZ.COM" keytabPath="$installPath/conf/hdfs.headless.keytab" kerberosExpireTime="2" sudoEnable="true" workerTenantAutoCreate="false"
3.2.2.4 安装
安装中问题，提示没有dolphinscheduler用户，三台都操作
groupadd dolphinscheduler
useradd -g dolphinscheduler-m -d /home/dolphinscheduler -s /bin/bash dolphinscheduler执行apache-dolphinscheduler-2.0.0-alpha-bin目录下的install.sh脚本进行安装部署
./install.sh
安装完成后DolphinScheduler会自动启动,可通过jps命令查看服务是否已经启动
jps
3475 QuorumPeerMain
5571 MasterServer # Master服务
5877 Jps
3703 NameNode
3848 DataNode
4457 NodeManager
5657 LoggerServer # 日志服务
4858 JobHistoryServer
5707 ApiApplicationServer # Api服务
4302 ResourceManager
5615 WorkerServer # Worker服务
查看启动状态
cd /opt/apps/dolphinscheduler/bin
./status-all.sh
node1 Begin status master-server......
master-server [ RUNNING]
End status master-server.
node2 Begin status master-server......
master-server [ STOP ]
End status master-server.
node1 Begin status worker-server......
worker-server [ RUNNING]
End status worker-server.
node1 Begin status logger-server......
logger-server [ RUNNING ]
End status logger-server.
node2 Begin status worker-server......
worker-server [ RUNNING]
End status worker-server.
node2 Begin status logger-server......
logger-server [ RUNNING ]
End status logger-server.
node3 Begin status worker-server......
worker-server [ RUNNING ]
End status worker-server.
node3 Begin status logger-server......
logger-server [ RUNNING ]
End status logger-server.
node3 Begin status alert-server......
alert-server [ RUNNING ]
End status alert-server.
node1 Begin status api-server......
api-server [ RUNNING ]
End status api-server.
如何停止和启动
[root@master01 bin]# pwd
/opt/apps/dolphinscheduler/bin
-rwxr-xr-x 1 root root 2110 12月 26 16:30 start-all.sh
-rwxr-xr-x 1 root root 2979 12月 26 16:30 status-all.sh
-rwxr-xr-x 1 root root 2105 12月 26 16:30 stop-all.sh
启动异常查看日志
/opt/apps/dolphinscheduler/logs3.2.2.5通过web界面访问
URL
-
URL
ip地址:12345/dolphinscheduler
-
默认用户
admin
-
默认密码
dolphinscheduler123
-
登录界面如下
4856
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
