100214 ~ 100220

10:14 2010-1-31 ~ 12:15 2010-1-31

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

 

16:14 2010-1-31 ~ 18:01 2010-1-31

阅读《Verilog HDL数字设计与综合》。P.119 ~ P.131

  心得:

         P.121

          ?函数,递归。

         P.126

          不宜使用过程连续赋值语句。

          不宜在模块内部使用force & release

         P.128

          模块调用时传入新参数,代替defparam

         P.130

          `ifdef语句不能使用布尔值。

         P.131

          条件执行标志只能用于行为语句。

          ?条件执行 vs 条件语句

 

19:04 2010-1-31 ~ 23:04 2010-1-31

阅读《Verilog HDL数字设计与综合》。P.119 ~ P.131

         P.133

          ?程序,模块的执行顺序。

         P.136

          随机数生成($random)。

 

8:32 2010-2-1 ~ 9:18 2010-2-1

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

 

15:03 2010-2-1 ~ 23:51 2010-2-2

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

         ? equ. 1 => equ. 2

 

7:53 2010-2-2 ~ 11:00 2010-2-2

阅读论文。《A Holter of Low Complexity Design Using Mixed Signal Processor

 

23:13 2010-2-3

闲着。

 

23:09 2010-2-4

依然闲着。

 

9:59 2010-2-5 ~ 23:38 2010-2-5

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

纠结于算法。

 

9:29 2010-2-6 ~ 22:45 2010-2-6

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     equ. 7, B vs. B~.

     equ. 8, ?证明。

 

9:25 2010-2-7 ~ 11:53 2010-2-7

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     Method C.

 

14:53 2010-2-7 ~ 17:26 2010-2-7

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     MCPinferior at high heart rate but superior when it is moderate.

 

9:36 2010-2-8 ~ 9:53 2010-2-8

背单词。

 

10:47 2010-2-8 ~ 12:25 2010-2-8

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     GF:

          Asuperior mostly, but not good when heart rate is high.(创新点)

          Zrequirement of computation.

          Z: put the algorithm to adaption.

     MCP:

          A: less computions.

          A: can operate in a beat-by-beat fashion.

 

13:03 2010-2-8 ~ 13:30 2010-2-8

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     DCT

          similar as MCP with high heart rate variability rapid, but inferior when it changes moderately.

          the more samples the better results.

          Z: linear prediction filter model order.

          Z: the truncation dimension.

 

15:50 2010-2-8 ~ 16:47 2010-2-8

阅读论文。《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

  心得:

     MCP > DCT robustness & easiness.

    

16:54 2010-2-8 ~ 17:10 2010-2-8

背单词。

 

19:19 2010-2-8 ~ 21:25 2010-2-8

重读《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

从数学上证明算法。

失败。

 

9:50 2010-2-9 ~ 11:49 2010-2-9

重读《A Single-Lead ECG Enhancement Algorithm Using a Regularized Data-Driven Filter》。

整理笔记。

 

17:42 2010-2-9 ~ 21:28 2010-2-9

调试开发板。配置开发环境。

 

7:09 2010-2-10 ~ 9:13 2010-2-10

阅读《ALtera FPGA/CPLD设计基础篇》。P.1 ~ P.18

  心得:

         P.3

          1-1

         P.4

          FPGA的基本可编程逻辑单元:查找表(LUT+寄存器,1:1

         P.5

          RAM实现ROM

          CAM <-- --> RAM

         P.7

          CPLD:基于乘积项(与或)结构。

          1-2

         P.8

          MC

         P.9

          Pin to Pin延时 ~ 速度。

         P.10

          1-1

         P.13

          布局布线后仿真 => 发现时序违规。

 

9:40 2010-2-10 ~ 10:59 2010-2-10

阅读《ALtera FPGA/CPLD设计基础篇》。P.29 ~ P.31

  心得:

         P.31

          横向互联较纵向的快,故StratixRAMDSP列向分布。

          2-2

          控制通道逻辑和外部高速存储接口上下,数据通道接口左右。

 

13:07 2010-2-10 ~ 14:32 2010-2-10

阅读《ALtera FPGA/CPLD设计基础篇》。P.32 ~ P.38

  心得:

         P.32

          2-3

         P.37

          !图2-82-9

         P.38

          2-11:时钟信号上升沿,选中RAM --> CLK下降沿,触发数据输出 --> CLK上升沿,取消选中RAM

 

16:07 2010-2-10 ~ 18:43 2010-2-10

阅读《ALtera FPGA/CPLD设计基础篇》。P.39 ~ P.48

  心得:

         P.40

          I/O同写未知,读写正确。

         P.46

          2-20I/O电平。

         P.47

          2-21,?梯形元件。

 

8:21 2010-2-11 ~ 8:36 2010-2-11

听力。

 

8:39 2010-2-11 ~ 9:37 2010-2-11

阅读《ALtera FPGA/CPLD设计基础篇》。P.75

  心得:

         P.49

          DQS移相电路。

 

15:15 2010-2-11 ~ 17:14 2010-2-11

熟悉Quartus2设计流程。

简单组合逻辑:语法编译通过,仿真结果有10ns延时。

 

20:12 2010-2-11 ~ 20:28 2010-2-11

熟悉Quartus2设计流程。

简单时序逻辑:编译未通过,程序报错退出。

 

7:54 2010-2-12 ~ 10:28 2010-2-12

阅读论文。《A Holter of Low Complexity Design Using Mixed Signal Processor》。

  心得:

     Parks-McClellan算法用到了切比雪夫定理和remez迭代算法,其总体思路是使最大误差最小化。

     Matlab中调用调用firpm函数即可。

     firpm函数的一般调用格式是b = firpm(n,f,a,w),其中n为滤波器阶数,f为给定的归一化了的频率点,a为希望达到的相应频率点的幅度,w为加权参数,返回的b为设计出来的最优等波纹滤波器的系数。

     arg min:使目标函数取最小值时的变量值 。

 

13:52 2010-2-12 ~ 16:15 2010-2-12

阅读论文。《A Holter of Low Complexity Design Using Mixed Signal Processor》。

  心得:

     环形缓冲区 & 双向卷积算法 --> 循环长度减半。

     MSP: 电池供电,端口测量应用,低频信号。

     MSP > MCU: fewer clocks for MAC

     MSP > DSP: cheaper

 

18:04 2010-2-12 ~ 19:57 2010-2-12

阅读论文。《A Holter of Low Complexity Design Using Mixed Signal Processor》。

  心得:

     SD card: serial out, serial in, clk

     SD card24hr uncompressed ECG, & simpler than CF

     keyboard & LCD unnecessary

 

20:23 2010-2-12 ~ 22:05 2010-2-12

熟悉Quartus2设计流程。

简单时序逻辑:语法错误。

条件语句的时序逻辑:教材语法有误(fdivision_Top.v15行:"F10M=0;" -> "F10M_clk=0;")。仿真结果不正确。

    

8:50 2010-2-13 ~ 9:36 2010-2-13

背单词。

 

9:37 2010-2-13 ~ 10:02 2010-2-13

熟悉Quartus2设计流程。

时序逻辑的阻塞赋值与非阻塞赋值:编译未通过。

 

10:03 2010-2-13 ~ 10:53 2010-2-13

阅读《QuartusII_使用手册.pdf》。

熟悉操作:setting

 

14:48 2010-2-13 ~ 15:26 2010-2-13

重读论文《A Holter of Low Complexity Design Using Mixed Signal Processor》。

整理笔记。

 

15:14 2010-2-14 ~ 16:15 2010-2-14

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     EA

          Zrequires many beats

          Zinter-beat variations lost

     Wiener Filter

          for stationary signals

          时域:因果。

          频域:非因果。

          Z: not expected

 

19:19 2010-2-14     ~ 21:40 2010-2-14

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     NN

          denoise by discarding dimensions correspond to noise

          Z: arbitrary unless trained globally

     Nonlinear Projective Filtering

          forming ad hoc statistical model

          powerful

          computationally intensive

          sensitive to outliers & changes

     model

          simplicity & flexibility

          -> can describle a broad class of signals

 

10:54 2010-2-15 ~ 12:07 2010-2-15

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     KF:

          optimal to MMSE sense

          linearize the nonlinear system model

 

14:50 2010-2-15 ~ 16:34 2010-2-15

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     EKS > EKF

     EKF

          cannot track around sharp turning

     UKF

          numerically sensitive & the covariance matrices semi-definite

               -> try to achieve numerically stable

 

17:19 2010-2-16

舟车劳顿,休息。

    

10:02 2010-2-17

俗务缠身。

 

9:22 2010-2-18 ~ 10:30 2010-2-18

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     equ.5

          to generate data for experiment.

          ECG waveform modeled with Gaussuan function.

          random variations added.

          z0BWrespiratory frequency

          数学公式不必深究。

 

21:02 2010-2-18 ~ 22:50 2010-2-18

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     equ.6

          > that in [17]:

               simpler, interpretation straightforward.(redundant)

               location of P,Q,R,S,T indicated.

              

9:06 2010-2-19 ~ 12:24 2010-2-19

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     observation equation

          results based on Gaussian noise.

          equ.12,乘法多余

          局限性较大。

 

18:27 2010-2-19 ~ 22:05 2010-2-20

阅读论文《A Nonlinear Bayesian Filtering Framework for ECG Denoising》。

  心得:

     Figure.2

 

22:46 2010-2-19 ~ 23:08 2010-2-19

阅读《CHina Daily》。

 

14:15 2010-2-20 ~ 16:15 2010-2-20

整理资料。

 

 

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值