CTF-MISC图片求正确宽高破解和修改总结

CTF-MISC图片求正确宽高破解和修改总结

---

---

图片宽高破解

根据像素求宽高

以青少年CTFmisc 简简单单的题目为例：

我鼠标右侧属性查看相册

右键属性，像素为900150=13500，去掉文件头后是675000/3=225000，明显多了很多，于是用225000除以900=250，所以正确的为900250

---

脚本求正确宽高

png图片：已知正确的IHDR块的CRC值时，爆破宽度和高度

import zlib
import struct

# 同时爆破宽度和高度
filename = "misc32.png"
with open(filename, 'rb') as f:
    all_b = f.read()
    data = bytearray(all_b[12:29])
    n = 4095
    for w in range(n):
        width = bytearray(struct.pack('>i', w))
        for h in range(n):
            height = bytearray(struct.pack('>i', h))
            for x in range(4):
                data[x+4] = width[x]
                data[x+8] = height[x]
            crc32result = zlib.crc32(data)
            #替换成图片的crc
            if crc32result == 0xE14A4C0B:
                print("宽为：", end = '')
                print(width, end = ' ')
                print(int.from_bytes(width, byteorder='big'))
                print("高为：", end = '')
                print(height, end = ' ')
                print(int.from_bytes(height, byteorder='big'))

png图片：IHDR块的CRC的值错误，已知高度的情况下爆破宽度

import zlib
import struct
filename = "misc34.png"
with open(filename, 'rb') as f:
    all_b = f.read()
    #w = all_b[16:20]
    #h = all_b[20:24]
    for i in range(901,1200):  #界定宽度的范围
        name = str(i) + ".png"
        f1 = open(name,"wb")
        im = all_b[:16]+struct.pack('>i',i)+all_b[20:]
        f1.write(im)
        f1.close()

jpg图片：已知高度，爆破宽度

import zlib
import struct
filename = "misc35.jpg"
with open(filename, 'rb') as f:
    all_b = f.read()
    #w = all_b[159:161]
    #h = all_b[157:159]
    for i in range(901,1200): #界定宽度范围
        name = str(i) + ".jpg"
        f1 = open(name,"wb")
        im = all_b[:159]+struct.pack('>h',i)+all_b[161:]
        f1.write(im)
        f1.close()

gif图片：已知高度爆破宽度

import zlib
import struct
filename = "misc36.gif"
with open(filename, 'rb') as f:
    all_b = f.read()
    for i in range(920,951):
        name = str(i) + ".gif"
        f1 = open(name,"wb")
        im = all_b[:38]+struct.pack('>h',i)[::-1]+all_b[40:]
        f1.write(im)
        f1.close()

---

如何修改宽高

010 Editor修改

用010 Editor打开PNG文件，通过模板打开，按F5键运行该脚本，模板结果按快捷键（Alt + 4）

---