EC20使用之 quectel-CM的启动

正常启动的输出内容：

login as: root
root@myimx6ek140p:~# /my-demo/gcc-linaro-5.3-arm/quectel-CM &
[1] 1981
root@myimx6ek140p:~# [02-26_06:41:30:596] WCDMA&LTE_QConnectManager_Linux&Android_V1.1.34
[02-26_06:41:30:597] /my-demo/gcc-linaro-5.3-arm/quectel-CM profile[1] = (null)/(null)/(null)/0, pincode = (null)
[02-26_06:41:30:599] Find /sys/bus/usb/devices/1-1 idVendor=2c7c idProduct=0125
[02-26_06:41:30:600] Find /sys/bus/usb/devices/1-1:1.4/net/eth2
[02-26_06:41:30:601] Find usbnet_adapter = eth2
[02-26_06:41:30:602] Find /sys/bus/usb/devices/1-1:1.4/GobiQMI/qcqmi2
[02-26_06:41:30:603] Find qmichannel = /dev/qcqmi2
[02-26_06:41:30:627] /proc/1850/fd/7 -> /dev/qcqmi2
[02-26_06:41:30:628] /proc/1850/fd/8 -> /dev/qcqmi2
[02-26_06:41:30:629] /proc/1850/fd/9 -> /dev/qcqmi2
[02-26_06:41:30:630] /proc/1850/fd/10 -> /dev/qcqmi2
[02-26_06:41:30:630] /proc/1850/fd/11 -> /dev/qcqmi2
[02-26_06:41:30:631] /proc/1850/exe -> /my-demo/gcc-linaro-5.3-arm/quectel-CM
[02-26_06:41:32:644] Get clientWDS = 7
[02-26_06:41:32:675] Get clientDMS = 8
[02-26_06:41:32:707] Get clientNAS = 9
[02-26_06:41:32:739] Get clientUIM = 10
[02-26_06:41:32:771] Get clientWDA = 11
[02-26_06:41:32:804] requestBaseBandVersion EC20CEHCLGR06A03M1G
[02-26_06:41:32:900] requestGetSIMStatus SIMStatus: SIM_READY
[02-26_06:41:32:932] requestGetProfile[1] cmnet///0
[02-26_06:41:32:964] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
[02-26_06:41:32:996] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED
[02-26_06:41:33:060] requestRegistrationState2 MCC: 460, MNC: 0, PS: Attached, DataCap: LTE
[02-26_06:41:33:091] requestSetupDataCall WdsConnectionIPv4Handle: 0xe17b5900
[02-26_06:41:33:188] requestQueryDataCall IPv4ConnectionStatus: CONNECTED
[02-26_06:41:33:220] ifconfig eth2 up
[02-26_06:41:33:246] busybox udhcpc -f -n -q -t 5 -i eth2
[02-26_06:41:33:264] udhcpc (v1.24.1) started
[02-26_06:41:33:388] Sending discover...
[02-26_06:41:33:448] Sending select for 10.89.175.113...
[02-26_06:41:33:508] Lease of 10.89.175.113 obtained, lease time 7200
[02-26_06:41:33:598] /etc/udhcpc.d/50default: Adding DNS 211.136.17.107
[02-26_06:41:33:600] /etc/udhcpc.d/50default: Adding DNS 211.136.20.203

此时能够看到输出了DNS的IP，此时如果ping这个DNS的IP应该是可以ping通的，如果不能ping通是有问题的，对于4G，可以通过route -n查看网关的IP，此时可以看到网关的IP

root@myimx6ek140p:~# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.89.175.114   0.0.0.0         UG    10     0        0 eth2
10.89.175.112   0.0.0.0         255.255.255.252 U     0      0        0 eth2
192.168.18.0    0.0.0.0         255.255.255.0   U     0      0        0 eth0

此时，ping网关IP：10.89.175.114,是无法ping通的，但是此时ping DNS的IP是能够通的

但是今天遇到一个问题：ping quectel指定的DNS地址也是不通，这就很成问题了，有待解决