- 博客(17)
- 资源 (10)
- 收藏
- 关注
原创 基于FPGA千兆以太网的安全网关
原创:转载请注明出处 基于FPGA千兆以太网的安全网关1、 系统功能描述 如上图所示:A机数据送发至B机,经B机交验后发送至C机,且在发送过程中A机与C机之间物理上隔离。2、 实现方法1)B机由2个FPGA模块组成,每个FPGA控制一个网口,两个FPGA间通过FIFO完成数据的单向传递。(FIFO:先进先出存储器模块,在FPGA内部实现。)2)A...
2013-03-29 14:08:45 2964
原创 在VS2010下配置 QT5
1、下载QT5http://qt-project.org/downloads2、安装3、设置环境变量4、安装 vs 插件5、在 VS2010 中打开 QT5 中的示例 之后自动生成 examples.sln ,并自动编译,编译时间较长,中间可能会没有影响。关闭
2013-01-23 14:14:48 13303 3
原创 ISE 13 Spartan 6 FPGA 配置 SPI Flash 芯片
开发板http://www.digilentinc.com/Products/Detail.cfm?NavPath=2,400,836&Prod=ATLYS 16Mbyte x4 SPI Flash for configuration & data storage 打开 iMP
2011-07-22 12:13:52 7587
原创 Spartan 6 temac 千兆网卡 IP 核使用
参考 LogiCORE IP XPS LL TEMACDS537 December 14, 2010 Clock Pin Selection时钟引脚选择When targeting a GMII design, it uses a BUFGMUX to sw
2011-07-03 11:46:26 8497 1
原创 MAR 指令
<br />MAR 指令用来修改辅助寄存器的值<br /> <br />相关的寄存器<br />ST0中的ARP、ST1中的CMPT、ARx<br /> <br /><br /> <br /> <br /><br /> <br />ARP 辅助寄存器指针 AR0~AR7,当CMPT= 0时,ARP=0<br />CMPT,修正方式位,决定ARP是否可以修正<br />CMPT = 0,不能修正ARP , ARP = 0<br />CMPT = 1, 可以修正ARP , 当 ARP= 0 时除外。<br />
2010-10-16 12:05:00 2791
原创 Synplify Pro / Perimer 9.6.2 install & crack
<br />http://user.qzone.qq.com/327420572/blog/1279426316
2010-07-18 12:13:00 2655
原创 ARM-SkyEye
<br />系统环境 ubuntu server 10.04 X64, <br /> <br />SkyEYE <br />http://skyeye.sourceforge.net/index.shtml<br /> <br />SkyEye is an Open Source Software Project (GPL Licence). Origin from GDB/Armulator, The goal of SkyEye is to provide an integrated simula
2010-07-13 13:06:00 1557
原创 Ubuntu Server 安装桌面
<br />1、安装桌面主题 <br /> <br />以 theme 为关键字搜索<br /> <br /> <br /><br /> <br /> <br /><br /> <br /> <br />主题安装完成后的效果<br /> <br />开启视觉效果<br /> <br />使用 <br /> <br />glxinfo |grep render 查看是否支持 <br /> <br /> <br />若不能使用上面的命令,使用apt-get install mesa-utils
2010-07-08 12:27:00 899
原创 Ubuntu Server 截屏工具
<br />1、截屏工具 feature-rich screenshot program<br /><br />Shutter 非常好用, <br /> <br />使用 SYNAPTIC 图形安装工具 搜索 shutter 安装即可<br /> <br />is a feature-rich screenshot program. You can take a<br />screenshot of a specific area, window, your whole screen,
2010-07-08 11:44:00 776
原创 SSH Server
安装 ssh server 在Windows 中使用 putty 访问 ubuntu server启用 root 帐户sudo passwd root输入当前用户密码输入 root 用户密码 ,重复输入一次。切换 root 用户 su rootapt-get install openssh-server使用 ifconfig查看 ip 地址 ,使用 putty ,ssh 方式远程登录服务器操作。
2010-06-29 23:06:00 2398
原创 更新Ubuntu Server 10.4 内核及编辑内核启动项
环境:Ubuntu Server 10.04cat /etc/lsb-release输入:sudo uname -r 查看内核版本/lib/modules输入 : apt-cache search linux image serverapt-get install linux-image-2.6.32-22-server安装完成后查看root@ServerU2:/lib/modules# ls -la总计 24drwxr-xr-x 4 root root 4096 2010-06-29 19:44 .d
2010-06-29 19:25:00 3146
原创 Ubuntu Server 更改IP 地址
<br />(1)Ubuntu Server修改IP<br />打开 /etc/network/interfaces<br />sudo vim /etc/network/interfaces<br />加入以下语句:<br />auto eth0<br />iface eth0 inet static<br />address xxx.xxx.xxx.xxx #IP地址<br />netmask xxx.xxx.xxx.xxx #子网掩码<br />gateway xxx.xxx.xxx.xxx #网关<
2010-06-29 18:55:00 3180
原创 Ubuntu Server 磁盘分区
一、环境 操作系统 Ubuntu Server 10.04 X64 硬盘500GB二、步骤 1、在磁盘分区页面选择---->"手动" 2、删除原有分区,在分区中按回车,然后在页面中选择“删除些分区” 3、删除完毕后,分区显示“主/逻辑 500.1GB 空闲空间” 4、使用空闲空间新建分区 ,在"空闲空间"项按回车---->选择“创建新分区” 分区列表如下: /dev/sda1(主分区)
2010-06-29 18:15:00 4340 1
原创 VTK .NET 正确的编译顺序
1、下载所需文件,http://sourceforge.net/project/showfiles.php?group_id=1679072、解压缩 *.bin.zip 文件到 所需文件夹,通常设置为 c:/programmefile/vtk/3、设置环境 编辑 Path 项, 加入 “ c:/programmefile/vtk/”,4、重新启动 VS2005打开 示例 程序,
2008-03-04 11:35:00 1755
原创 C# VTK .NET
今天准备在 这写点东西了, 搞VTK也有阵子,了就写写吧,http://vtkdotnet.sourceforge.net/Programming.html这是一个 vtk 的开源项目,,
2008-03-03 09:40:00 4246
空空如也
TA创建的收藏夹 TA关注的收藏夹
TA关注的人