ok6410 linux驱动 四 adc模数转换

Uart

驱动源程序：

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/serio.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/wait.h>
#include <linux/sched.h>
#include <linux/cdev.h>
#include <linux/miscdevice.h>


#include <asm/io.h>
#include <asm/irq.h>
#include <asm/uaccess.h>


#include <mach/map.h>
#include <mach/regs-clock.h>
#include <mach/regs-gpio.h>
#include <plat/regs-timer.h>
#include <plat/regs-adc.h>


#define DEVICE_NAME "my_adc"


static void __iomem *base_addr;
#define __ADCREG(name) (*(volatile unsigned long *)(base_addr + name))
#define ADCCON __ADCREG(S3C_ADCCON)// ADC control
#define ADCDAT0 __ADCREG(S3C_ADCDAT0)


static int s3c6410_adc_open(struct inode *inode, struct file *filp)
{
ADCCON=1<<16|(1<<14)|(65<<6)|(0<<3)|(0<<2)|(1<<0);
    while(ADCCON&0x01);


return 0;
}


static ssize_t s3c6410_adc_read(struct file *filp, char *buffer, size_t count, loff_t *ppos)
{unsigned int ADC_value;
 while(!(ADCCON&(1<<15)));


   ADC_value=ADCDAT0&0x08ff;


printk("<0>""ADC:%ld \n",ADC_value);
   return 0;


}
static int s3c6410_adc_release(struct inode *inode, struct file *filp)
{
printk("<0>""ADC exit!\n");
return 0;


}
static struct file_operations dev_fops = {
owner: THIS_MODULE,
open: s3c6410_adc_open,
read: s3c6410_adc_read,
release: s3c6410_adc_release,
};
static struct miscdevice misc = {
.minor = MISC_DYNAMIC_MINOR,
.name = DEVICE_NAME,
.fops = &dev_fops,
};
static int __init dev_init(void)
{
base_addr = ioremap(SAMSUNG_PA_ADC, 0x20);
misc_register(&misc);


return 0;
}
static void __exit dev_exit(void)
{
iounmap(base_addr);
misc_deregister(&misc);


}
module_init(dev_init);
module_exit(dev_exit);


MODULE_LICENSE("GPL");

2、应用程序：

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
int main (int argc,char *argv[])
{
int fd;
char a=1;

fd = open("/dev/my_adc",O_RDWR);
if (fd < 0)
{
printf ("Open /dev/my_led file error\n");
return -1;
}
        
read(fd,0,0);
        close (fd);
return 0;

}