【实验拓扑】
【实验需求】
利用MSTP实现VLAN10 和VLAN20的互访,并且VLAN10的流量通过路径S3到S1到R1,VLAN20的流量通过路径S3到S2到R1。
【实验过程】
1.配置客户端和路由器的IP地址。
[r1]int g0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.10.254 24
[r1-GigabitEthernet0/0/0]undo sh
[r1-GigabitEthernet0/0/0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip add 192.168.20.254 24
[r1-GigabitEthernet0/0/1]undo sh
2.配置VLAN和Trunk。
[sw1]vlan batch 10 20
[sw1]int e0/0/2
[sw1-Ethernet0/0/2]port link-type trunk
[sw1-Ethernet0/0/2]port trunk allow- vlan all
[sw1-Ethernet0/0/2]int e0/0/3
[sw1-Ethernet0/0/3]port link-type trunk
[sw1-Ethernet0/0/3]port trunk allow- vlan all
[sw1-Ethernet0/0/3]int e0/0/1
[sw1-Ethernet0/0/1]port link-type hybrid
[sw1-Ethernet0/0/1]port hybrid untagged vlan 10
[sw1-Ethernet0/0/1]port hybrid pvid 10
[sw2]vlan batch 10 20
[sw2-Ethernet0/0/2]port link-type trunk
[sw2-Ethernet0/0/2]port trunk allow-pass vlan all
[sw2-Ethernet0/0/2]int e0/0/3
[sw2-Ethernet0/0/3]port link-type trunk
[sw2-Ethernet0/0/3]port trunk allow-pass vlan all
[sw2-Ethernet0/0/3]int e0/0/1
[sw2-Ethernet0/0/1]port link-type hybrid
[sw2-Ethernet0/0/1]port hybrid pvid vlan 20
[sw2-Ethernet0/0/1]port hybrid untagged vlan 20
[sw3]int e0/0/1
[sw3-Ethernet0/0/1]port link-type trunk
[sw3-Ethernet0/0/1]port trunk allow-pass vlan all
[sw3-Ethernet0/0/1]int e0/0/2
[sw3-Ethernet0/0/2]port link-type trunk
[sw3-Ethernet0/0/2]port trunk allow-pass vlan all
[sw3-Ethernet0/0/3]int e0/0/3
[sw3-Ethernet0/0/3]port link-type access
[sw3-Ethernet0/0/3]port default vlan 10
[sw3-Ethernet0/0/3]int e0/0/4
[sw3-Ethernet0/0/4]port link-type access
[sw3-Ethernet0/0/4]port default vlan 20
3.配置MSTP。
[sw1]stp mode mstp
[sw1]stp region-configuration
[sw1-mst-region]region-name benet.com
[sw1-mst-region]revision-level 1
[sw1-mst-region]instance 1 vlan 10
[sw1-mst-region]instance 2 vlan 20
[sw1-mst-region]active region-configuration
[sw1-mst-region]q
[sw1]stp instance 1 root primary
[sw1]stp instance 2 root secondary
[sw2]stp mode mstp
[sw2]stp region-configuration
[sw2-mst-region]region-name benet.com
[sw2-mst-region]revision-level 1
[sw2-mst-region]instance 1 vlan 10
[sw2-mst-region]instance 2 vlan 20
[sw2-mst-region]active region-configuration
[sw2-mst-region]q
[sw2]stp instance 1 root secondary
[sw2]stp instance 2 root primary
[sw3]stp mode mstp
[sw3]stp region-configuration
[sw3-mst-region]revision-level 1
[sw3-mst-region]instance 1 vlan 10
[sw3-mst-region]instance 2 vlan 20
[sw3-mst region]active region-configuration
4.验证:在SW3 上验证,display stp b查看STP接口角色及状态信息,其中的instance1中的e0/0/2和instance2中的e0/0/1处于阻塞状态。
MSTP的相关配置
最新推荐文章于 2023-12-21 13:59:18 发布