vlan标签

实验要求

实验思路 

pc1与PC3使用VLAN2接口设置为Access类型

PC2与PC6使用VLAN1接口类型设置为hybrid类型 PC1untagged VLAN 为 1 to 3PC6

拒绝vlan 3

PC4与PC5使用VLAN3接口类型设置为hybrid类型pvid设置为3，Untagged vlan为1 同3

实验步骤

AR1

注：一个物理接口只能管理一个VLAN要使一个物理口多个VLAN分发网段是上行不打标签

配置

dhcp enable
#
ip pool dhcp1
 gateway-list 192.168.1.1 
 network 192.168.1.0 mask 255.255.255.0 
 dns-list 8.8.8.8 
#
ip pool dhcp2
 gateway-list 192.168.2.1 
 network 192.168.2.0 mask 255.255.255.0 
 dns-list 8.8.8.8 

#
firewall zone Local
 priority 15
#
interface GigabitEthernet0/0/0
 ip address 192.168.1.1 255.255.255.0 
 dhcp select global
#
interface GigabitEthernet0/0/0.1
 dot1q termination vid 2
 ip address 192.168.2.1 255.255.255.0 
 arp broadcast enable
 dhcp select global

SW1配置

interface GigabitEthernet0/0/1
 port hybrid tagged vlan 2
 port hybrid untagged vlan 3
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 2 to 3
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/4
 port hybrid untagged vlan 2 to 3

SW2配置

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 3
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 2 to 3
#
interface GigabitEthernet0/0/3
 port link-type access
 port default vlan 2
#
interface GigabitEthernet0/0/4
 port hybrid pvid vlan 3
 port hybrid untagged vlan 2 to 3
#

SW3配置

interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 2 to 3
#
interface GigabitEthernet0/0/2
 port hybrid pvid vlan 3
 port hybrid untagged vlan 2 to 3
#
interface GigabitEthernet0/0/3
 port hybrid untagged vlan 2