在Ubuntu12.04上使用bridge-utils建Wi-Fi AP

所需软件：

sudo apt-get install bridge-utils

1。新建/etc/hostapd/hostapd.conf

$ cat /etc/hostapd/hostapd.conf

interface=wlan0
bridge=br0
driver=nl80211
ssid=myAP
hw_mode=g
channel=10
#dtim_period=1
#rts_threshold=2347
#fragm_threshold=2346
macaddr_acl=0
#ignore_broadcast_ssid=0
auth_algs=3
#ieee80211n=0
wpa=2
wpa_passphrase=PassWord
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP
rsn_pairwise=TKIP CCMP

2。编写启动脚本

#!/bin/bash


service network-manager stop


ifconfig eth0 0.0.0.0   #remove IP from eth0
ifconfig eth0 up    #ensure the interface is up


ifconfig wlan0 0.0.0.0  #remove IP from wlan0
ifconfig wlan0 up   #ensure the interface is up


brctl addb