配置交换机端口隔离、速率、双工等【未完善】-CSDN博客

配置交换机端口隔离、速率、双工等

...

The device is running!
############################################
<lvhanghmm>sys
Enter system view, return user view with Ctrl+Z.
[lvhanghmm]port-iso	
[lvhanghmm]port-isolate mode 12
                             ^
Error: Unrecognized command found at '^' position.
[lvhanghmm]port-isolate mode l2
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga	
[lvhanghmm]int GigabitEthernet 1/0/1
                               ^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet l/0/1
                               ^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet 1/0/1
                               ^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet1/0/1
               ^
Error: Wrong parameter found at '^' position.
[lvhanghmm]int GigabitEthernet0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]port	
[lvhanghmm-GigabitEthernet0/0/1]port-iso	
[lvhanghmm-GigabitEthernet0/0/1]port-isolate en	
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grouop	
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable grou	
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group l
                                                          ^
Error: Wrong parameter found at '^' position.
[lvhanghmm-GigabitEthernet0/0/1]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]int giga	
[lvhanghmm]int GigabitEthernet 0/0/2
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]port	
[lvhanghmm-GigabitEthernet0/0/2]port-iso	
[lvhanghmm-GigabitEthernet0/0/2]port-isolate en	
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable gro	
[lvhanghmm-GigabitEthernet0/0/2]port-isolate enable group 1
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]
[lvhanghmm-GigabitEthernet0/0/2]quit
[lvhanghmm]
[lvhanghmm]
[lvhanghmm]

配置以太网接口GE0/0/1在自协商模式下协商速率为100Mb/s

[lvhanghmm]int giga	
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]aut	
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]auto s	
[lvhanghmm-GigabitEthernet0/0/1]auto speed 100
Error: Configuration fails.
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]

#配置以太网电接口GE0/0/1在自协商模式下双工模式为全双工模式

[lvhanghmm]int giga	
[lvhanghmm]int GigabitEthernet 0/0/1
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]
[lvhanghmm-GigabitEthernet0/0/1]negotiation auto

请忽略以下的内容

开机就开机呀！怎么还有所谓的登陆与离开呀？不是开机就能够用计算机了吗？开什么玩笑，在Linux系统中由于是多用户多任务的环境，所以系统随时都有很多不同的用户所下达的任务在进行，因此正确的开关机可是很重要的！不正常的关机可能会导致文件系统错乱，造成数据的毁损呢！这也是为什么通常我们的Linux主机都会加挂一个不断电系统啰！

如果在第三章一切都顺利的将CentOS 7.x完成安装并且重新开机后，应该就会出现如下的等待登陆的图形画面才对。画面中1号箭头显示目前的日期与时间，2号箭头则是辅助功能、语系、音量与关机钮， 3号箭头就是我们可以使用帐号登陆的输入框框，至于4号箭头则是在使用特别的帐号登陆时才会用到的按钮。