keepalived群集

已于 2023-12-26 17:15:48 修改
阅读量157 收藏
点赞数 1
文章标签： linux 运维 服务器
于 2023-10-03 15:57:36 首次发布
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/Meng2453508284/article/details/133520909
版权

keepalived介绍

Keepalived 是一个基于vrrp协议来实现LVS服务高可用方案，可以解决静态路由出现的单点故障问题

keepalived工作原理

在一个LWS服务集群中通常有主服务器STBR) 和备份服务器BACKUP) 两种角色的服务器，但是对外表现为一个虚拟IP(VIP)，主服务器会发送VRRP通告信息给备份服务器，当备份服务器收不到VRRP消息的时候，即主服务器异常的时候，备份服务器就会接管虚拟IP，继续提供服务，从而保证了高可用性。

keepalived体系主要模块

keepalived体系架构中主要有三个模块：core check vrrp

core模块：为keepalived的核心，负责主进程的启动、维护及全局配置文件的加载和解析

check模块：负责健康检查，常见的方式有端口检查和URL检查 （节点服务器的检查）

vrrp模块： 来实现VRRP协议的（调度器之间的健康检查和主备切换）

keepalived+LVS高可用集群配置

官方网站：http://www.keepalived.org/
web服务器1 192.168.65.101
web服务器2 192.168.65.102
主DR 服务器：192.168.65.106
备DR 服务器：192.168.65.105
VIP 192.168.65.110

#在所有操作前要关闭所有机器的防火墙和selinux

配置web服务器

101 web服务器
[root@www ~]#yum -y install httpd
[root@www ~]#cd /var/www/html
[root@www html]#vim test.html
this is web1 page 
[root@www html]#cd /etc/sysconfig/network-scripts/
[root@www network-scripts]#vim ifcfg-lo:0
[root@www network-scripts]#systemctl restart network
[root@www network-scripts]#systemctl start httpd
[root@www network-scripts]#ifconfig lo:0
lo:0: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 192.168.65.110  netmask 255.255.255.255
        loop  txqueuelen 1  (Local Loopback)

[root@www network-scripts]#route add -host 192.168.65.110 dev lo:0
[root@www network-scripts]#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.65.2    0.0.0.0         UG    100    0        0 ens33
192.168.65.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.65.110  0.0.0.0         255.255.255.255 UH    0      0        0 lo
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
[root@www network-scripts]#vim /etc/sysctl.conf
[root@www network-scripts]#vim /etc/sysctl.conf
[root@www network-scripts]#sysctl -p
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@www network-scripts]#systemctl stop keepalived.service
[root@www network-scripts]#vim ifcfg-lo:0
[root@www network-scripts]#vim /etc/sysctl.conf
[root@www network-scripts]#sysctl -p
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2
[root@www network-scripts]#

102 web服务器
[root@localhost ~]#yum -y install httpd
[root@localhost ~]#cd /var/www/html
[root@localhost html]#ls
[root@localhost html]#vim test.html
this is web2 page
[root@localhost html]#
[root@localhost html]#cd /etc/sysconfig/network-scripts/
[root@localhost network-scripts]#ls
ifcfg-ens33  ifdown-ipv6    ifdown-TeamPort  ifup-ippp   ifup-routes       network-functions
ifcfg-lo     ifdown-isdn    ifdown-tunnel    ifup-ipv6   ifup-sit          network-functions-ipv6
ifdown       ifdown-post    ifup             ifup-isdn   ifup-Team
ifdown-bnep  ifdown-ppp     ifup-aliases     ifup-plip   ifup-TeamPort
ifdown-eth   ifdown-routes  ifup-bnep        ifup-plusb  ifup-tunnel
ifdown-ib    ifdown-sit     ifup-eth         ifup-post   ifup-wireless
ifdown-ippp  ifdown-Team    ifup-ib          ifup-ppp    init.ipv6-global
[root@localhost network-scripts]#vim ifcfg-lo:0
[root@localhost network-scripts]#systemctl restart network
[root@localhost network-scripts]#systemctl start httpd
[root@localhost network-scripts]#ifconfig lo:0
lo:0: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 192.168.65.110  netmask 255.255.255.255
        loop  txqueuelen 1  (Local Loopback)

[root@localhost network-scripts]#route add -host 192.168.65.110 dev lo:0
[root@localhost network-scripts]#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.65.2    0.0.0.0         UG    100    0        0 ens33
192.168.65.0    0.0.0.0         255.255.255.0   U     100    0        0 ens33
192.168.65.110  0.0.0.0         255.255.255.255 UH    0      0        0 lo
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
[root@localhost network-scripts]#vim /etc/sysctl.conf
[root@localhost network-scripts]#sysctl -p
net.ipv4.conf.lo.arp_ignore = 1
net.ipv4.conf.lo.arp_announce = 2
net.ipv4.conf.all.arp_ignore = 1
net.ipv4.conf.all.arp_announce = 2

配置主备服务器

主服务器
[root@localhost yum.repos.d]# yum -y install ipvsadm keepalived
[root@localhost yum.repos.d]# cd /etc/keepalived/
[root@localhost keepalived]# cp keepalived.conf keepalived.conf.bak
[root@localhost keepalived]# ls
keepalived.conf  keepalived.conf.bak
[root@localhost keepalived]# vim keepalived.conf
global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1 #修改为本机邮件地址
   smtp_connect_timeout 30
   router_id LVS_01 #指定服务器（路由器）的名称，主备服务器名称须不同 主为LVS_01，备为LVS_02
   vrrp_skip_check_adv_addr
   #vrrp_strict  #要注释掉
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state MASTER  #指定热备状态，主为MASTER，备为BACKUP
    interface ens33  #指定虚拟路由器的ID号，每个热备组保持一致
    virtual_router_id 51
    priority 100  #优先级，主的优先级大于备
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }
    virtual_ipaddress {
        192.168.65.110#指定群集vip地址
    }
}

virtual_server 192.168.65.110 80 {#指定虚拟服务器地址(VIP)、端口，定义虚拟服务器和Web服务器池参数
    delay_loop 6
    lb_algo rr
    lb_kind DR #改为DR模式
    persistence_timeout 50
    protocol TCP

    real_server 192.168.65.101 80 { #指定第一个Web节点的地址、端口
        weight 1 #节点的权重
        TCP_CHECK {  #添加健康检查方式
            connetc_port 80
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
    real_server 192.168.65.102 80 {#指定第二个Web节点的地址、端口
        weight 1
        TCP_CHECK {
            connetc_port 80
            connect_timeout 3
            nb_get_retry 3
            delay_before_retry 3
        }
    }
}

[root@localhost keepalived]# systemctl start keepalived.service
[root@localhost keepalived]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:f6:41:44 brd ff:ff:ff:ff:ff:ff
    inet 192.168.65.106/24 brd 192.168.65.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.65.110/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::6e6:5516:e3a5:1df5/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:62:7b:1b brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:62:7b:1b brd ff:ff:ff:ff:ff:ff
[root@localhost keepalived]# vim /etc/sysctl.conf

[root@localhost keepalived]# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost keepalived]# ipvsadm-save > /etc/sysconfig/ipvsadm
[root@localhost keepalived]# systemctl start ipvsadm
[root@localhost keepalived]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  127.0.0.1:80 rr persistent 50
  -> 192.168.65.101:80            Route   1      0          0
  -> 192.168.65.102:80            Route   1      0          0
[root@localhost keepalived]# ls
keepalived.conf  keepalived.conf.bak
[root@localhost keepalived]# scp keepalived.conf 192.168.65.105:`pwd` #在备服务器安装了keepalived服务之后
The authenticity of host '192.168.65.105 (192.168.65.105)' can't be established.
ECDSA key fingerprint is SHA256:0uVzxvjz78kvP/DW7x6yuiceb5ddmohQ+q+Rkw0Yci8.
ECDSA key fingerprint is MD5:cf:e7:ab:d9:0d:c0:56:dc:e8:22:96:cd:54:c3:3d:5b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.65.105' (ECDSA) to the list of known hosts.
root@192.168.65.105's password:
keepalived.conf                                                 100% 1174     1.6MB/s   00:00
[root@localhost keepalived]# vim /etc/sysctl.conf
[root@localhost keepalived]#
[root@localhost keepalived]#
[root@localhost keepalived]# ipvsadm -A -t 192.168.65.110:80 -s rr
[root@localhost keepalived]# ipvsadm
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  localhost:http rr persistent 50
  -> 192.168.65.101:http          Route   1      0          0
  -> 192.168.65.102:http          Route   1      0          0
TCP  localhost.localdomain:http rr
[root@localhost keepalived]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  127.0.0.1:80 rr persistent 50
  -> 192.168.65.101:80            Route   1      0          0
  -> 192.168.65.102:80            Route   1      0          0
TCP  192.168.65.110:80 rr
[root@localhost keepalived]#

备服务器
[root@localhost yum.repos.d]# yum -y install ipvsadm keepalived
[root@localhost yum.repos.d]# cd /etc/keepalived/
[root@localhost keepalived]# ls
keepalived.conf
[root@localhost keepalived]# ls
keepalived.conf
[root@localhost keepalived]# vim keepalived.conf

 notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id LVS_02 #指定服务器（路由器）的名称，主备服务器名称须不同 主为LVS_01，备为LVS_02
   vrrp_skip_check_adv_addr
   #vrrp_strict  
   vrrp_garp_interval 0
   vrrp_gna_interval 0
}

vrrp_instance VI_1 {
    state BACKUP  #指定热备状态，主为MASTER，备为BACKUP
    interface ens33  
    virtual_router_id 51
    priority 90  #优先级，主的优先级大于备
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }

[root@localhost keepalived]# systemctl start keepalived.service
[root@localhost keepalived]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:38:f8:2e brd ff:ff:ff:ff:ff:ff
    inet 192.168.65.105/24 brd 192.168.65.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.65.110/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::fbdd:bf23:9285:4611/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:46:82:bb brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:46:82:bb brd ff:ff:ff:ff:ff:ff
[root@localhost keepalived]# vim /etc/sysctl.conf
[root@localhost keepalived]#
[root@localhost keepalived]# sysctl -p
net.ipv4.ip_forward = 1
net.ipv4.conf.all.send_redirects = 0
net.ipv4.conf.default.send_redirects = 0
net.ipv4.conf.ens33.send_redirects = 0
[root@localhost keepalived]# ipvsadm-save > /etc/sysconfig/ipvsadm
[root@localhost keepalived]# systemctl start ipvsadm
[root@localhost keepalived]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  127.0.0.1:80 rr persistent 50
  -> 192.168.65.101:80            Route   1      0          0
  -> 192.168.65.102:80            Route   1      0          0

[root@localhost keepalived]# ipvsadm -A -t 192.168.65.110:80 -s rr
[root@localhost keepalived]# ipvsadm
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  localhost:http rr persistent 50
  -> 192.168.65.101:http          Route   1      0          0
  -> 192.168.65.102:http          Route   1      0          0
TCP  localhost.localdomain:http rr
[root@localhost keepalived]# ipvsadm -ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  127.0.0.1:80 rr persistent 50
  -> 192.168.65.101:80            Route   1      0          0
  -> 192.168.65.102:80            Route   1      0          0
TCP  192.168.65.110:80 rr

测试

关闭主服务器后，依旧可以访问web服务器，证明实验成功

脑裂问题

脑裂现象

主服务器和备服务器同时拥有VIP

脑裂原因

主服务器好玩备服务器之间的通信链路中断，导致备服务器无法正常收到主服务器发送的VRRP心跳报文

解决方法

关闭主服务器或者备服务器其中一个的keepalived服务

预防措施

1、主服务器与备服务器之间添加双联通链路

2、在主服务器上定义运行脚本判断备服务器通信链路是否中断，如果中断则自行滚逼keepalived服务

3、利用第三方监控软件检测是否发生脑裂故障，如果发生则通过监控软件关闭主或备服务器上的keepalived服务

keepalived+ nginx实现高可用

主服务器 192.168.65.104
备服务器 192.168.65.105
web1 192.168.65.104
web2 192.168.65.105

104
[root@localhost ~]# yum -y install nginx keepalived
[root@localhost ~]#cd /usr/share/nginx/html/
[root@localhost html]# echo 'this is web1' test.html
[root@localhost ~]# systemctl start nginx
[root@localhost ~]# vim /etc/nginx/nginx.conf
#在http同层添加以下内容
stream {
  upstream backends {
  server 192.168.64.104:80 weight=1 max_fails=2 fail_timeout=30s;
  server 192.168.65.104:80 weight=1 max_fails=2 fail_timeout=30s;
  #max_fails:允许请求失败的次数，默认为1
  #fail_timeout:如果达到了max_fails的失败次数，将暂停后端服务的时间，默认为10s
  }
  server {
    listen 1226;
    proxy_pass backends;
  }
}

[root@localhost ~]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
[root@localhost ~]# systemctl restart nginx
[root@localhost ~]# netstat -lnap|grep nginx
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      7590/nginx: master
tcp        0      0 0.0.0.0:1226            0.0.0.0:*               LISTEN      7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     80999    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81002    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81001    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81003    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81004    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81005    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81006    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81000    7590/nginx: master

[root@localhost ~]# cd /etc/keepalived/
[root@localhost keepalived]# vim check_nginx.sh
#!/bin/bash
#当nginx关闭后，keepalived服务就会停止
if ! killall -0 nginx & > /dev/null
then
systemctl stop keepalived
fi

[root@localhost keepalived]# chmod +x check_nginx.sh
[root@localhost keepalived]# cp keepalived.conf{,.bak}
[root@localhost keepalived]# ls
check_nginx.sh  keepalived.conf  keepalived.conf.bak
[root@localhost keepalived]# vim keepalived.conf

! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1 #修改地址
   smtp_connect_timeout 30
   router_id NGINX_01 #修改为NGINX_01，删除后边四行 
}

#添加下边五行
vrrp_script check_nginx{
    script "/etc/keepalived/check_nginx.sh"
    interval 2
    weight 2
}

vrrp_instance VI_1 {
    state MASTER #MASTER为主
    interface ens33 #修改网卡
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    virtual_ipaddress {
    192.168.65.200  #修改VIP地址
    }
    #添加检查方式
    track_script{
        check_nginx
    }
}

[root@localhost keepalived]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet 192.168.65.128/32 brd 192.168.65.128 scope global lo:0
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:73:1c:5f brd ff:ff:ff:ff:ff:ff
    inet 192.168.65.104/24 brd 192.168.65.255 scope global ens33
       valid_lft forever preferred_lft forever
    inet 192.168.65.200/32 scope global ens33
       valid_lft forever preferred_lft forever
    inet6 fe80::1468:e3ee:f1c7:7128/64 scope link
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:d2:63:f3 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:d2:63:f3 brd ff:ff:ff:ff:ff:ff

[root@localhost keepalived]# scp check_nginx.sh 192.168.65.105:`pwd`
The authenticity of host '192.168.65.105 (192.168.65.105)' can't be established.
ECDSA key fingerprint is SHA256:0uVzxvjz78kvP/DW7x6yuiceb5ddmohQ+q+Rkw0Yci8.
ECDSA key fingerprint is MD5:cf:e7:ab:d9:0d:c0:56:dc:e8:22:96:cd:54:c3:3d:5b.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.65.105' (ECDSA) to the list of known hosts.
root@192.168.65.105's password:
check_nginx.sh                                  100%   82    72.5KB/s   00:00
[root@localhost keepalived]# scp keepalived.conf 192.168.65.105:`pwd`
root@192.168.65.105's password:
keepalived.conf                                 100%  680    24.9KB/s   00:00
[root@localhost keepalived]# systemctl restart keepalived.service

105
[root@localhost ~]# yum -y install nginx keepalived
[root@localhost ~]#cd /usr/share/nginx/html/
[root@localhost html]# echo 'this is web2' test.html
[root@localhost ~]# systemctl start nginx
[root@localhost ~]# vim /etc/nginx/nginx.conf
#在http同层添加以下内容
stream {
  upstream backends {
  server 192.168.64.104:80 weight=1 max_fails=2 fail_timeout=30s;
  server 192.168.65.104:80 weight=1 max_fails=2 fail_timeout=30s;
  #max_fails:允许请求失败的次数，默认为1
  #fail_timeout:如果达到了max_fails的失败次数，将暂停后端服务的时间，默认为10s
  }
  server {
    listen 1226;
    proxy_pass backends;
  }
}

[root@localhost ~]# nginx -t
nginx: the configuration file /etc/nginx/nginx.conf syntax is ok
nginx: configuration file /etc/nginx/nginx.conf test is successful
[root@localhost ~]# systemctl restart nginx
[root@localhost ~]# netstat -lnap|grep nginx
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      7590/nginx: master
tcp        0      0 0.0.0.0:1226            0.0.0.0:*               LISTEN      7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     80999    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81002    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81001    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81003    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81004    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81005    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81006    7590/nginx: master
unix  3      [ ]         STREAM     CONNECTED     81000    7590/nginx: master
[root@localhost ~]# cd /etc/keepalived/
[root@localhost keepalived]# ls
check_nginx.sh  keepalived.conf
[root@localhost keepalived]# vim keepalived.conf
! Configuration File for keepalived

global_defs {
   notification_email {
     acassen@firewall.loc
     failover@firewall.loc
     sysadmin@firewall.loc
   }
   notification_email_from Alexandre.Cassen@firewall.loc
   smtp_server 127.0.0.1 #修改地址
   smtp_connect_timeout 30
   router_id NGINX_02 #修改为NGINX_02，删除后边四行 
}

#添加下边五行
vrrp_script check_nginx{
    script "/etc/keepalived/check_nginx.sh"
    interval 2
    weight 2
}

vrrp_instance VI_1 {
    state BACKUP #BACKUP为主
    interface ens33 #修改网卡
    virtual_router_id 51
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass 1111
    }

    virtual_ipaddress {
    192.168.65.200  #修改VIP地址
    }
    #添加检查方式
    track_script{
        check_nginx
    }
}
[root@localhost keepalived]# systemctl restart keepalived.service

然后在浏览器中输入一下网址测试，实现了高可用
http://192.168.65.200:1226/test.html
当主服务器killall nginx 后  主的keepalived服务也会停掉，这是因为写的那个check_nginx脚本 ，这是VIP地址将会去到备服务器
孟孟爱吃香菜
关注
基于LVS+keepalived群集
09-25
### 基于LVS+Keepalived群集构建详解 #### 一、概述 随着互联网业务的不断发展，单一服务器已经难以满足日益增长的服务需求。为了提高系统的可用性和负载分担能力，通常采用群集技术来实现高可用性和高性能的服务...
LVS+keepalived群集教程（原创）
06-06
【LVS+Keepalived群集教程】 LVS（Linux Virtual Server）是基于Linux操作系统的一套高性能、高可用的负载均衡技术，它能够将网络流量分发到多个服务器上，提高系统的并发处理能力和稳定性。Keepalived是一款用于...
实验手册keepalived+haproxy
09-28
### 实验手册：Keepalived + Haproxy 高可用架构搭建 #### 一、实验背景及概述 在现代互联网架构中，为了提高系统的稳定性和可用性，通常会采用多种技术手段来构建高可用（High Availability，简称HA）的网络环境...
KeepAlived 双节点 HA高可用 主备群集
09-05
在搭建 KeepAlived 双节点 HA 群集时，首先需要修改内核参数以支持 IP 转发和非本地 IP 绑定。这一步骤在 HAproxy01 和 HAproxy02 两台服务器上都需要执行： 1. 启用 IP 转发： ``` sed -r -i -e 's/(^[ \t]*...
mysql双主同步+keepalived高可用群集
02-17
mysql【1】主从同步之人机交互自动化配置脚本-CSDN博客 ...mysql【3】keepalived+mysql双主同步，实现故障转移群集 https://blog.csdn.net/u014332402/article/details/136137707 这3篇文章所使用的所有自动化配置脚本
linux长时间运行任务中断报警trap
djl的专栏，blog.djl.cx好记
11-08 251
每天要运行的定时任务, 时间很长, 有一天突然被中断了, 如果能有个中断提醒就好了。sleep 命令模拟一个长时间运行的任务，并在后台运行它。wait 命令等待任务完成或被杀死，并检查。wait 命令的退出状态码来判断脚本是否被。在这个脚本中，我们使用。
linux rocky 9.4部署和管理docker harbor私有源
xikui1551的博客
11-08 1073
rocky 部署Harbor私有镜像仓库
Linux下的systemd/service
zxz_Fine的博客
11-05 584
开机自启任务
linux-find和zgrep
luxideyao的专栏
11-07 312
命令本身并不支持递归搜索，它只能搜索单个压缩文件。但是，你可以结合使用。如果你想要搜索所有类型的压缩文件，你可以使用。是你想要搜索的目录的路径。是你想要搜索的文本模式，文件，你可能需要使用。文件并搜索其中的内容。作为输入文件的占位符。
Linux kernel 源码下载与源码在线阅读地址及其相关资源网站
代码背包客的博客
11-06 411
Linux内核源码的下载地址和在线阅读方式有多种，下面是一些与之相关的网址。同时也包含一些与kernel相关的一些资源网站，供大家参考学习！
Xshell，Shell的相关介绍与Linux中的权限问题
2301_81265915的博客
11-09 514
首先，先介绍一下我们学习Linux的工具：XshellXShell 是一个流行的 Windows 平台上的 SSH、Telnet 和 Rlogin 客户端，主要用于远程连接 Linux/Unix 系统。它的运行原理大致如下：1：协议支持： XShell 支持多种远程协议（如 SSH、Telnet、Rlogin 等）。最常用的是 SSH 协议，它提供了安全的加密通信。SSH（Secure Shell）通过加密对客户端和服务器之间的通信进行保护，以防止数据在网络中被窃听和篡改。2：建立连接。
LInux基础 （一）：Linux 系统重要命令拾遗
vortex5的博客
11-06 1112
SUID（Set User ID）是文件权限中的一种特殊标志，表示该文件在执行时将使用文件所有者的权限，而不是执行者的权限。Sticky 位是另一种特殊权限，主要用于目录，表示只有文件的所有者才能删除该目录中的文件，而其他用户只能修改自己的文件。硬链接是指向文件的多个入口，所有硬链接指向相同的数据块，不会占用额外的磁盘空间，除非删除所有硬链接。软链接类似于Windows的快捷方式，它是一个独立的文件，包含了指向目标文件的路径。笔记内容参考了B站UP主 泷羽sec 的学习视频，如有侵权，将立即删除。
Linux磁盘存储
眷怀的博客
11-06 1165
设备文件是类Unix操作系统（包括Linux）中一种特殊的文件类型，它代表了设备接口，使得用户空间的程序可以通过标准的文件操作来访问和控制硬件设备。设备文件为周边设备提供了简单的接口，如打印机、硬盘等，也可以访问没有连接到任何真实设备的系统资源，如随机数生成器等。
Linux（CentOS）安装 MySQL
BillKu的博客
11-06 370
MySQL版本：MySQL Community Server 8.4.3 LTS。CentOS版本：CentOS 7。
Linux系列-进程的属性
in_seattle的博客
11-06 949
我们可以看到，这两个死循环同时再跑->两个执行流同时在跑，if 和else if同时成立，从fork之后就会有两个进程，分布进行，fork有两个返回值，给父进程返回子进程的pid，给子进程返回0.这两个分支之间也是父子关系，一个是父进程（自己），一个子进程（fork创建的），一个父进程是可以创建出多个子进程的，所以进程其实也是树形结构。在命令行当中，执行命令，执行程序，本质就是bash的进程，创建的子进程，执行我们的代码，如果是我们刚才创建的进程，这个时候，他的PID是17293，当我们重新启动这个进程。
【企业级分布式系统】Linux-Rsync远程同步
Karoku的博客
11-07 879
工具相结合，可以实现触发式备份（实时同步），即只要原始位置的文档发生变化，则立即启动增量备份操作；这样，就避免了按固定周期备份时存在的延迟性、周期过密等问题。rsync使用所谓的“Rsync算法”来使本地和远程两个主机之间的文件达到同步。这个算法只传送两个文件的不同部分（通过差分编码实现），而不是每次都整份传送，因此速度相当快。通知接口，可以用来监控文件系统的各种变化情况，如文件存取、删除、移动、修改等。利用这一机制，可以非常方便地实现文件异动告警、增量备份，并针对目录或文件的变化及时作出响应。
【Linux】工具和软件
林宇恒的博客
11-06 401
yum, vim, gcc/g++, makefile, git, gdb
Linux:基本开发工具
最新发布
2302_80892233的博客
11-10 679
三种模式1.命令模式2.插入模式3.底行模式vim的操作打开，关闭，查看，查询，插入，删除，替换，撤销，复制，粘粘等操作。
【Linux】拆分详解 - vim / gcc / makefile
bubble_shadow的博客
11-08 864
本文介绍了 Linux 中与编程强相关的三个工具：文本编辑器，代码编译器，自动化编译器。旨在帮助初学者快速入手使用 Linux 进行代码编写与编译。
使用LVS+keepalived构建集群实战指南
"基于LVS+keepalived群集的构建和配置方法" 在这个文档中，作者分享了如何使用LVS（Linux Virtual Server）和keepalived来搭建一个高可用的群集，实现负载均衡。LVS是一个开源的、基于Linux内核的负载均衡解决方案...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值