PIC18F4520 UART模板

最新推荐文章于 2024-03-23 02:19:45 发布

MetalSeed

最新推荐文章于 2024-03-23 02:19:45 发布

阅读量3.3k

点赞数

本文链接：https://blog.csdn.net/MetalSeed/article/details/27707825

版权

这篇博客介绍了如何利用MPLAB V8.53来配置和设置8位微控制器PIC18F4520的UART通信接口。

摘要由CSDN通过智能技术生成

如题

MPLAB V8.53 PIC18F4520 8bit MCU

#define USE_AND_MASKS

#include <stdio.h> 
#include <stdlib.h> 
#include <delays.h> 
#include <usart.h> 

#pragma config OSC = INTIO67 //internal oscillator 
#pragma config WDT = OFF //watchdog timer off 
#pragma config LVP = OFF //... 
#pragma config PBADEN = OFF //Analog functions on PORTB OFF 


void initUART(void); 
void setClock(void); 

unsigned char msg[] = "Hello"; 

/* 
 * main function 
 */ 
void main() { 
    setClock(); 
    initUART(); 

    while(1) //infinite loop 
    { 
       putsUSART(msg); 
       Delay10KTCYx(125); 
    } 
} 
/** 
 * Initialise registers and pins for uart 
 */ 
void initUART() { 
    int baud = 51; // set baud rate to 9600 
	unsigned char UART1Config = USART_TX_INT_OFF & USART_RX_INT_OFF & USART_ASYNCH_MODE & USART_EIGHT_BIT & USART_BRGH_HIGH;
    //TRISCbits.RC6 = 0; //TX p