<Huawei>
<Huawei>ys]
Nov 21 2022 18:56:46-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[0]:Interface GigabitEt
hernet0/0/0 has turned into UP state.
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]
Nov 21 2022 18:56:49-08:00 Huawei %%01IFPDT/4/IF_STATE(l)[1]:Interface GigabitEt
hernet0/0/1 has turned into UP state.
[Huawei]sy r1
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]ip ad
[r1-GigabitEthernet0/0/0]ip address
Nov 21 2022 18:59:24-08:00 r1 %%01IFPDT/4/IF_STATE(l)[2]:Interface GigabitEthern
et0/0/2 has turned into UP state.
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 24
Nov 21 2022 18:59:36-08:00 r1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int
[r1-GigabitEthernet0/0/0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip ad
[r1-GigabitEthernet0/0/1]ip address 12.1.1.1 24
Nov 21 2022 18:59:50-08:00 r1 %%01IFNET/4/LINK_STATE(l)[4]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r1-GigabitEthernet0/0/1]int
[r1-GigabitEthernet0/0/1]int g0/0/2
[r1-GigabitEthernet0/0/2]ip ad
[r1-GigabitEthernet0/0/2]ip address 172
^
Error: Wrong parameter found at '^' position.
[r1-GigabitEthernet0/0/2]ip ad
[r1-GigabitEthernet0/0/2]ip address 172.16.2.1 24
Nov 21 2022 19:00:16-08:00 r1 %%01IFNET/4/LINK_STATE(l)[5]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r1-GigabitEthernet0/0/2]qu
[r1-GigabitEthernet0/0/2]quit
[r1]ip p
[r1]ip policy-based-route
[r1]ip pool 1
Info: It's successful to create an IP address pool.
[r1-ip-pool-1]n
[r1-ip-pool-1]nbns-list
[r1-ip-pool-1]netbios-type
[r1-ip-pool-1]network 192.168.1.0 m
[r1-ip-pool-1]network 192.168.1.0 mask 24
[r1-ip-pool-1]g
[r1-ip-pool-1]gateway-list
[r1-ip-pool-1]gateway-list
[r1-ip-pool-1]gateway-list 192.168.1.1
[r1-ip-pool-1]d
[r1-ip-pool-1]dialer
[r1-ip-pool-1]display
[r1-ip-pool-1]dns-list 8.8.8.8 114.114.114.114
[r1-ip-pool-1]qu
[r1-ip-pool-1]quit
[r1-ip-pool-1]quit
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]d
[r1-GigabitEthernet0/0/0]ddns
[r1-GigabitEthernet0/0/0]description
[r1-GigabitEthernet0/0/0]dhcp s
[r1-GigabitEthernet0/0/0]dhcp select g
[r1-GigabitEthernet0/0/0]dhcp select global
Error: Please enable DHCP in the global view first.
[r1-GigabitEthernet0/0/0]qu
[r1-GigabitEthernet0/0/0]quit
[r1]dh
[r1]dhcp e
[r1]dhcp enable
Info: The operation may take a few seconds. Please wait for a moment.done.
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]d
[r1-GigabitEthernet0/0/0]ddns
[r1-GigabitEthernet0/0/0]description
[r1-GigabitEthernet0/0/0]dhcp s
[r1-GigabitEthernet0/0/0]dhcp select g
[r1-GigabitEthernet0/0/0]dhcp select global
[r1-GigabitEthernet0/0/0]qu
[r1]ip p
[r1]ip policy-based-route
[r1]ip pool 2
Info: It's successful to create an IP address pool.
[r1-ip-pool-2]ne
[r1-ip-pool-2]netbios-type
[r1-ip-pool-2]network 172.16.2.0 m
[r1-ip-pool-2]network 172.16.2.0 mask 24
[r1-ip-pool-2]g
[r1-ip-pool-2]gateway-list 172.16.2.1
[r1-ip-pool-2]d
[r1-ip-pool-2]dialer
[r1-ip-pool-2]display
[r1-ip-pool-2]dns-list 8.8.8.8 114.114.114.114
[r1-ip-pool-2]qu
[r1-ip-pool-2]quit
[r1]ing
[r1]int
[r1]interface g0/0/2
[r1-GigabitEthernet0/0/2]d
[r1-GigabitEthernet0/0/2]ddns
[r1-GigabitEthernet0/0/2]description
[r1-GigabitEthernet0/0/2]dhcp s
[r1-GigabitEthernet0/0/2]dhcp select g
[r1-GigabitEthernet0/0/2]dhcp select global
[r1-GigabitEthernet0/0/2]
[r1-GigabitEthernet0/0/2]
[r1-GigabitEthernet0/0/2]
<r1>sy
Enter system view, return user view with Ctrl+Z.
[r1]os
[r1]ospf 1 r
[r1]ospf 1 router-id 1.1.1.1
[r1-ospf-1]ar
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]ne
[r1-ospf-1-area-0.0.0.1]network
^
Error:Incomplete command found at '^' position.
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]ne
[r1-ospf-1-area-0.0.0.1]network 12.1.1.0 0.0.0.255
[r1-ospf-1-area-0.0.0.1]ne
[r1-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
[r1-ospf-1-area-0.0.0.1]network 172.16.2.0 0.0.0.255
[r1-ospf-1-area-0.0.0.1]
[r1-ospf-1-area-0.0.0.1]
<r1>
<r1>sy
Enter system view, return user view with Ctrl+Z.
[r1]os
[r1]ospf 1
[r1-ospf-1]a
[r1-ospf-1]arp-ping
[r1-ospf-1]asbr-summary
[r1-ospf-1]area 1
[r1-ospf-1-area-0.0.0.1]a
[r1-ospf-1-area-0.0.0.1]arp-ping
[r1-ospf-1-area-0.0.0.1]authentication-mode s
[r1-ospf-1-area-0.0.0.1]authentication-mode simple c
[r1-ospf-1-area-0.0.0.1]authentication-mode simple cipher 123
[r1-ospf-1-area-0.0.0.1]
Nov 21 2022 20:10:09-08:00 r1 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=2.2.2.2, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r1-ospf-1-area-0.0.0.1]
Nov 21 2022 20:10:09-08:00 r1 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Hello Not Seen, Ne
ighborChangeTime=2022-11-21 20:10:09-08:00)
[r1-ospf-1-area-0.0.0.1]
Nov 21 2022 20:10:09-08:00 r1 %%01RM/4/IPV4_DEFT_RT_CHG(l)[2]:IPV4 default Route
is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEthe
rnet0/0/1, Nexthop=12.1.1.2, Neighbour=0.0.0.0, Preference=2516582400, Label=NUL
L, Metric=16777216)
[r1-ospf-1-area-0.0.0.1]qu
[r1-ospf-1]qu
[r1]ping 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Request time out
Request time out
[r1]
[r1]ping
[r1]ping 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Reply from 4.4.4.4: bytes=56 Sequence=1 ttl=253 time=100 ms
Reply from 4.4.4.4: bytes=56 Sequence=2 ttl=253 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=3 ttl=253 time=60 ms
Reply from 4.4.4.4: bytes=56 Sequence=4 ttl=253 time=80 ms
Reply from 4.4.4.4: bytes=56 Sequence=5 ttl=253 time=70 ms
--- 4.4.4.4 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 50/72/100 ms
[r1]
[r1]
[r1]int
[r1]interface g0/0/0
[r1-GigabitEthernet0/0/0]os
[r1-GigabitEthernet0/0/0]ospf t
[r1-GigabitEthernet0/0/0]ospf trans-delay
[r1-GigabitEthernet0/0/0]ospf timer h
[r1-GigabitEthernet0/0/0]ospf timer hello 5
[r1-GigabitEthernet0/0/0]
[r1-GigabitEthernet0/0/0]
[r1-GigabitEthernet0/0/0]
<Huawei>sy
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r2
[r2]ip ad
[r2]in
[r2]info-center
[r2]interface g0/0/1
[r2-GigabitEthernet0/0/1]ip ad
[r2-GigabitEthernet0/0/1]ip address 12.1.1.2 24
[r2-GigabitEthernet0/0/1]
Nov 21 2022 19:07:17-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]int
[r2-GigabitEthernet0/0/1]int g0/0/2
[r2-GigabitEthernet0/0/2]ip ad
[r2-GigabitEthernet0/0/2]ip address 23.1.1.1 24
Nov 21 2022 19:07:35-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/2 has entered the UP state.
[r2-GigabitEthernet0/0/2]
<r2>sy
Enter system view, return user view with Ctrl+Z.
[r2]os
[r2]ospf 1 r
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]a
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1]
[r2-ospf-1-area-0.0.0.1]ne
[r2-ospf-1-area-0.0.0.1]network 12.1.1.0 0.0.0.255
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchan
ge)
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[r2-ospf-1-area-0.0.0.1]
Nov 21 2022 19:39:44-08:00 r2 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.12, NeighborE
vent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r2-ospf-1-area-0.0.0.1]n
[r2-ospf-1-area-0.0.0.1]network 23.1.1.0 0.0.0.255
[r2-ospf-1-area-0.0.0.1]
[r2-ospf-1-area-0.0.0.1]
[r2-ospf-1-area-0.0.0.1]dis
[r2-ospf-1-area-0.0.0.1]display os
[r2-ospf-1-area-0.0.0.1]display ospf p
[r2-ospf-1-area-0.0.0.1]display ospf peer
OSPF Process 1 with Router ID 2.2.2.2
Neighbors
Area 0.0.0.1 interface 12.1.1.2(GigabitEthernet0/0/1)'s neighbors
Router ID: 1.1.1.1 Address: 12.1.1.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 12.1.1.1 BDR: 12.1.1.2 MTU: 0
Dead timer due in 40 sec
Retrans timer interval: 5
Neighbor is up for 00:03:34
Authentication Sequence: [ 0 ]
[r2-ospf-1-area-0.0.0.1]
[r2-ospf-1-area-0.0.0.1]
<r2>sy
Enter system view, return user view with Ctrl+Z.
[r2]os
[r2]ospf 1 a
[r2]ospf 1
[r2-ospf-1]a
[r2-ospf-1]arp-ping
[r2-ospf-1]asbr-summary
[r2-ospf-1]area 1
[r2-ospf-1-area-0.0.0.1]a
[r2-ospf-1-area-0.0.0.1]arp-ping
[r2-ospf-1-area-0.0.0.1]authentication-mode s
[r2-ospf-1-area-0.0.0.1]authentication-mode simple c
[r2-ospf-1-area-0.0.0.1]authentication-mode simple cipher 123
[r2-ospf-1-area-0.0.0.1]
<r2>sy
Enter system view, return user view with Ctrl+Z.
[r2]int g0/0/1
[r2-GigabitEthernet0/0/1]ospf timer hello 5
[r2-GigabitEthernet0/0/1]
[r2-GigabitEthernet0/0/1]
[r2-GigabitEthernet0/0/1]int g0/0/2
[r2-GigabitEthernet0/0/2]
Nov 21 2022 20:16:52-08:00 r2 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=1.1.1.1, NeighborEven
t=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r2-GigabitEthernet0/0/2]
Nov 21 2022 20:16:52-08:00 r2 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=1.1.1.1, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate re
ason=Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Paramete
r Mismatch, NeighborChangeTime=2022-11-21 20:16:52-08:00)
[r2-GigabitEthernet0/0/2]ospf timer hello 5
[r2-GigabitEthernet0/0/2]
<Huawei>sy
<Huawei>system-view
Enter system view, return user view with Ctrl+Z.
[Huawei]sy r3
[r3]ip ad
[r3]int
[r3]interface g0/0/0
[r3-GigabitEthernet0/0/0]ip ad
[r3-GigabitEthernet0/0/0]ip address 23.1.1.2 24
[r3-GigabitEthernet0/0/0]
Nov 21 2022 19:08:08-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip ad
[r3-GigabitEthernet0/0/1]ip address
^
Error:Incomplete command found at '^' position.
[r3-GigabitEthernet0/0/1]ip ad
[r3-GigabitEthernet0/0/1]ip address 123.1.1.1 24
Nov 21 2022 19:11:44-08:00 r3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r3-GigabitEthernet0/0/1]
<r3>
<r3>sy
Enter system view, return user view with Ctrl+Z.
[r3]os
[r3]ospf 1
[r3-ospf-1]r
[r3-ospf-1]retransmission-limitqu
[r3-ospf-1]qu
[r3-ospf-1]quit
[r3]os
[r3]ospf 1 r
[r3]ospf 1 router-id 3.3.3.3
Info: The configuration succeeded. You need to restart the OSPF process to valid
ate the new router ID.
[r3-ospf-1]
[r3-ospf-1]
[r3-ospf-1]a
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]ne
[r3-ospf-1-area-0.0.0.1]network 23.1.1.0 0.0.0.255
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchan
ge)
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[r3-ospf-1-area-0.0.0.1]
Nov 21 2022 19:46:48-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-ospf-1-area-0.0.0.1]qu
[r3-ospf-1]a
[r3-ospf-1]area 2
[r3-ospf-1-area-0.0.0.2]qu
[r3-ospf-1]a
[r3-ospf-1]arp-ping
[r3-ospf-1]asbr-summary
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]n
[r3-ospf-1-area-0.0.0.0]nssa
[r3-ospf-1-area-0.0.0.0]network 123.1.1.0 0.0.0.255
[r3-ospf-1-area-0.0.0.0]
<r3>sy
Enter system view, return user view with Ctrl+Z.
[r3]os
[r3]ospf 1
[r3-ospf-1]a
[r3-ospf-1]arp-ping
[r3-ospf-1]asbr-summary
[r3-ospf-1]area 1
[r3-ospf-1-area-0.0.0.1]a
[r3-ospf-1-area-0.0.0.1]arp-ping
[r3-ospf-1-area-0.0.0.1]authentication-mode s
[r3-ospf-1-area-0.0.0.1]authentication-mode simple c
[r3-ospf-1-area-0.0.0.1]authentication-mode simple cipher 123
[r3-ospf-1-area-0.0.0.1]
<r3>sy
Enter system view, return user view with Ctrl+Z.
[r3]int g0/0/0
[r3-GigabitEthernet0/0/0]ospf timer hello 5
[r3-GigabitEthernet0/0/0]
Nov 21 2022 20:17:20-08:00 r3 %%01OSPF/3/NBR_DOWN_REASON(l)[0]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=2.2.2.2, Neighbor
AreaId=16777216, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate re
ason=Neighbor Down Due to 1-Wayhello Received, NeighborDownPrimeReason=1-Wayhell
o Received, NeighborChangeTime=2022-11-21 20:17:20-08:00)
[r3-GigabitEthernet0/0/0]
Nov 21 2022 20:17:20-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=1-Way, NeighborPreviousState=Full, NeighborCurrentState=Init)
[r3-GigabitEthernet0/0/0]int
Nov 21 2022 20:17:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=ExStart)
[r3-GigabitEthernet0/0/0]int
Nov 21 2022 20:17:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exchan
ge)
[r3-GigabitEthernet0/0/0]int
Nov 21 2022 20:17:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading)
[r3-GigabitEthernet0/0/0]int
Nov 21 2022 20:17:23-08:00 r3 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.23, NeighborE
vent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ospf timer hello 5
[r3-GigabitEthernet0/0/1]
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[30]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[31]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[32]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[33]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[34]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[35]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[36]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[37]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[38]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=ExStart, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[39]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[40]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[41]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r4-GigabitEthernet0/0/0]int
Nov 21 2022 20:04:39-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[42]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]os
[r4-GigabitEthernet0/0/1]ospf dr
[r4-GigabitEthernet0/0/1]ospf dr-priority 0
Nov 21 2022 20:04:53-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[43]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=5.5.5.5, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4-GigabitEthernet0/0/1]
Nov 21 2022 20:04:53-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[44]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-21 20:04:53-08:00)
[r4-GigabitEthernet0/0/1]
<r4>sy
Enter system view, return user view with Ctrl+Z.
[r4]os
[r4]ospf 1
[r4-ospf-1]a
[r4-ospf-1]arp-ping
[r4-ospf-1]asbr-summary
[r4-ospf-1]area 2
[r4-ospf-1-area-0.0.0.2]a
[r4-ospf-1-area-0.0.0.2]arp-ping
[r4-ospf-1-area-0.0.0.2]authentication-mode s
[r4-ospf-1-area-0.0.0.2]authentication-mode simple c
[r4-ospf-1-area-0.0.0.2]authentication-mode simple cipher 123
[r4-ospf-1-area-0.0.0.2]a
[r4-ospf-1-area-0.0.0.2]abr-summary
[r4-ospf-1-area-0.0.0.2]arp-ping
[r4-ospf-1-area-0.0.0.2]authentication-mode md
[r4-ospf-1-area-0.0.0.2]authentication-mode md5
[r4-ospf-1-area-0.0.0.2]
[r4-ospf-1-area-0.0.0.2]qu
[r4-ospf-1-area-0.0.0.2]quit
[r4-ospf-1]dis
[r4-ospf-1]display ps
[r4-ospf-1]display o
[r4-ospf-1]display observe-port
[r4-ospf-1]display observe-server
[r4-ospf-1]display optical-info
[r4-ospf-1]display ospf
[r4-ospf-1]display ospf p
[r4-ospf-1]display ospf peer
OSPF Process 1 with Router ID 123.1.1.4
Neighbors
Area 0.0.0.0 interface 123.1.1.4(GigabitEthernet0/0/0)'s neighbors
Router ID: 23.1.1.2 Address: 123.1.1.1
State: Full Mode:Nbr is Slave Priority: 1
DR: 123.1.1.1 BDR: None MTU: 0
Dead timer due in 34 sec
Retrans timer interval: 0
Neighbor is up for 00:10:45
Authentication Sequence: [ 0 ]
Router ID: 5.5.5.5 Address: 123.1.1.5
State: 2-Way Mode:Nbr is Slave Priority: 0
DR: 123.1.1.1 BDR: None MTU: 0
Dead timer due in 37 sec
Retrans timer interval: 0
Neighbor is up for 00:00:00
Authentication Sequence: [ 0 ]
Router ID: 6.6.6.6 Address: 123.1.1.6
State: 2-Way Mode:Nbr is Slave Priority: 0
DR: 123.1.1.1 BDR: None MTU: 0
Dead timer due in 39 sec
Retrans timer interval: 5
Neighbor is up for 00:00:00
Authentication Sequence: [ 0 ]
Neighbors
Area 0.0.0.0 interface 56.1.1.1(GigabitEthernet0/0/1)'s neighbors
Router ID: 5.5.5.5 Address: 56.1.1.2
State: 2-Way Mode:Nbr is Slave Priority: 0
DR: None BDR: None MTU: 0
Dead timer due in 34 sec
Retrans timer interval: 0
Neighbor is up for 00:00:00
Authentication Sequence: [ 0 ]
[r4-ospf-1]
[r4-ospf-1]
[r4-ospf-1]
[r4-ospf-1]
[r4-ospf-1]
[r4-ospf-1]qu
[r4]int g0/0/0
Nov 21 2022 20:18:09-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[0]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4]int g0/0/0
Nov 21 2022 20:18:09-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[1]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4]int g0/0/0
Nov 21 2022 20:18:09-08:00 r4 %%01OSPF/3/NBR_CHG_DOWN(l)[2]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborEve
nt=InactivityTimer, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r4]int g0/0/0
Nov 21 2022 20:18:09-08:00 r4 %%01OSPF/3/NBR_DOWN_REASON(l)[3]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=2.1.1.23, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Mism
atch, NeighborChangeTime=2022-11-21 20:18:09-08:00)
[r4]int g0/0/0
[r4-GigabitEthernet0/0/0]ospf timer hello 5
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:14-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r4-GigabitEthernet0/0/0]
Nov 21 2022 20:18:17-08:00 r4 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r4-GigabitEthernet0/0/0]int g0/0/1
[r4-GigabitEthernet0/0/1]ospf timer hello 5
[r4-GigabitEthernet0/0/1]
r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[33]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[34]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[35]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[36]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[37]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:05:52-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[38]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[39]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[40]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[41]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[42]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[43]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[44]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:05:54-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[45]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/2]int g0/0/1
[r5-GigabitEthernet0/0/1]os
[r5-GigabitEthernet0/0/1]ospf dr
[r5-GigabitEthernet0/0/1]ospf dr-priority 0
Nov 21 2022 20:06:19-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[46]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=6.6.6.6, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/1]
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:19-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[47]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=6.6.6.6, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-21 20:06:19-08:00)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[48]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[49]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[50]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[51]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Excha
nge)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[52]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loading
)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:06:23-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[53]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=2.1.1.45, Neighbor
Event=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/1]
<r5>sy
Enter system view, return user view with Ctrl+Z.
[r5]os
[r5]ospf 1
[r5-ospf-1]a
[r5-ospf-1]arp-ping
[r5-ospf-1]asbr-summary
[r5-ospf-1]area 2
[r5-ospf-1-area-0.0.0.2]a
[r5-ospf-1-area-0.0.0.2]arp-ping
[r5-ospf-1-area-0.0.0.2]authentication-mode s
[r5-ospf-1-area-0.0.0.2]authentication-mode simple c
[r5-ospf-1-area-0.0.0.2]authentication-mode simple cipher 123
[r5-ospf-1-area-0.0.0.2]a
[r5-ospf-1-area-0.0.0.2]abr-summary
[r5-ospf-1-area-0.0.0.2]arp-ping
[r5-ospf-1-area-0.0.0.2]authentication-mode m
[r5-ospf-1-area-0.0.0.2]authentication-mode md5
[r5-ospf-1-area-0.0.0.2]
[r5-ospf-1-area-0.0.0.2]
[r5-ospf-1-area-0.0.0.2]
[r5-ospf-1-area-0.0.0.2]
[r5-ospf-1-area-0.0.0.2]qu
[r5-ospf-1]qu
[r5]int g0/0/0
[r5-GigabitEthernet0/0/0]ospf timer hello 5
[r5-GigabitEthernet0/0/0]
Nov 21 2022 20:18:44-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.56, NeighborE
vent=1-Way, NeighborPreviousState=2Way, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/0]
Nov 21 2022 20:18:46-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]in
Nov 21 2022 20:18:46-08:00 r5 %%01OSPF/3/NBR_CHG_DOWN(l)[7]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=4.1.1.123, NeighborEv
ent=InactivityTimer, NeighborPreviousState=2Way, NeighborCurrentState=Down)
[r5-GigabitEthernet0/0/0]in
Nov 21 2022 20:18:46-08:00 r5 %%01OSPF/3/NBR_DOWN_REASON(l)[8]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=4.1.1.123, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/2,NeighborDownImmediate reason=
Neighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Mis
match, NeighborChangeTime=2022-11-21 20:18:46-08:00)
[r5-GigabitEthernet0/0/0]int g0/0/
Nov 21 2022 20:18:50-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.56, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]int g0/0/
Nov 21 2022 20:18:50-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.56, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/0]int g0/0/2
[r5-GigabitEthernet0/0/2]ospf timer hello 5
[r5-GigabitEthernet0/0/2]
Nov 21 2022 20:18:55-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:18:58-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:18:58-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:18:58-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r5-GigabitEthernet0/0/2]int
Nov 21 2022 20:18:58-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/2]int g0/0/1
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:03-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:03-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:03-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[18]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=6.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:04-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[19]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:04-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[20]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r5-GigabitEthernet0/0/1]
Nov 21 2022 20:19:04-08:00 r5 %%01OSPF/4/NBR_CHANGE_E(l)[21]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r5-GigabitEthernet0/0/1]ospf timer hello 5
[r5-GigabitEthernet0/0/1]
[r5-GigabitEthernet0/0/1]
[r5-GigabitEthernet0/0/1]
[r6-GigabitEthernet0/0/0]
Nov 21 2022 20:06:46-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[24]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/0,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-21 20:06:46-08:00)
[r6-GigabitEthernet0/0/0]int
[r6-GigabitEthernet0/0/0]int
Nov 21 2022 20:06:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[25]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]int
Nov 21 2022 20:06:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[26]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]int
Nov 21 2022 20:06:51-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[27]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]int g0/0/1
[r6-GigabitEthernet0/0/1]os
[r6-GigabitEthernet0/0/1]ospf dr
[r6-GigabitEthernet0/0/1]ospf dr-priority 0
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[28]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=2.1.1.23, NeighborEv
ent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/1]
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[29]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=2.1.1.23, Neighb
orAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=
Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-11-21 20:07:00-08:00)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[30]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=4.1.1.123, NeighborE
vent=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[31]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=4.1.1.123, Neigh
borAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason
=Neighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter
Mismatch, NeighborChangeTime=2022-11-21 20:07:00-08:00)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[32]:Neighbor event:neig
hbor state changed to Down. (ProcessId=256, NeighborAddress=5.5.5.5, NeighborEve
nt=KillNbr, NeighborPreviousState=Full, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[33]:Neighbor state l
eaves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbo
rAreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=N
eighbor Down Due to Kill Neighbor, NeighborDownPrimeReason=Interface Parameter M
ismatch, NeighborChangeTime=2022-11-21 20:07:00-08:00)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01RM/4/IPV4_DEFT_RT_CHG(l)[34]:IPV4 default Rout
e is changed. (ChangeType=Delete, InstanceId=0, Protocol=OSPF, ExitIf=GigabitEth
ernet0/0/1, Nexthop=123.1.1.4, Neighbour=0.0.0.0, Preference=2516582400, Label=N
ULL, Metric=16777216)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[35]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[36]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:00-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[37]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:04-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[38]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:04-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[39]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:04-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[40]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:04-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[41]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[42]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[43]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[44]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[45]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[46]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[47]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[48]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:07:10-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[49]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-GigabitEthernet0/0/1]
<r6>sy
Enter system view, return user view with Ctrl+Z.
[r6]os
[r6]ospf 1
[r6-ospf-1]a
[r6-ospf-1]arp-ping
[r6-ospf-1]asbr-summary
[r6-ospf-1]area 2
[r6-ospf-1-area-0.0.0.2]a
[r6-ospf-1-area-0.0.0.2]arp-ping
[r6-ospf-1-area-0.0.0.2]authentication-mode s
[r6-ospf-1-area-0.0.0.2]authentication-mode simple c
[r6-ospf-1-area-0.0.0.2]authentication-mode simple cipher 123
[r6-ospf-1-area-0.0.0.2]a
[r6-ospf-1-area-0.0.0.2]abr-summary
[r6-ospf-1-area-0.0.0.2]arp-ping
[r6-ospf-1-area-0.0.0.2]authentication-mode m
[r6-ospf-1-area-0.0.0.2]authentication-mode md5
[r6-ospf-1-area-0.0.0.2]
[r6-ospf-1-area-0.0.0.2]
[r6-ospf-1-area-0.0.0.2]re
[r6-ospf-1-area-0.0.0.2]reset
[r6-ospf-1-area-0.0.0.2]return
<r6>ping 4.4.4.4
PING 4.4.4.4: 56 data bytes, press CTRL_C to break
Reply from 4.4.4.4: bytes=56 Sequence=1 ttl=255 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=2 ttl=255 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=3 ttl=255 time=50 ms
Reply from 4.4.4.4: bytes=56 Sequence=4 ttl=255 time=40 ms
Reply from 4.4.4.4: bytes=56 Sequence=5 ttl=255 time=50 ms
--- 4.4.4.4 ping statistics ---
5 packet(s) transmitted
5 packet(s) received
0.00% packet loss
round-trip min/avg/max = 40/46/50 ms
<r6>
<r6>sy
Enter system view, return user view with Ctrl+Z.
[r6]int
[r6]interface g0/0/0
[r6-GigabitEthernet0/0/0]
Nov 21 2022 20:19:24-08:00 r6 %%01OSPF/3/NBR_CHG_DOWN(l)[0]:Neighbor event:neigh
bor state changed to Down. (ProcessId=256, NeighborAddress=5.5.5.5, NeighborEven
t=InactivityTimer, NeighborPreviousState=2Way, NeighborCurrentState=Down)
[r6-GigabitEthernet0/0/0]
Nov 21 2022 20:19:24-08:00 r6 %%01OSPF/3/NBR_DOWN_REASON(l)[1]:Neighbor state le
aves full or changed to Down. (ProcessId=256, NeighborRouterId=5.5.5.5, Neighbor
AreaId=0, NeighborInterface=GigabitEthernet0/0/1,NeighborDownImmediate reason=Ne
ighbor Down Due to Inactivity, NeighborDownPrimeReason=Interface Parameter Misma
tch, NeighborChangeTime=2022-11-21 20:19:24-08:00)
[r6-GigabitEthernet0/0/0]ospf timer hello 5
[r6-GigabitEthernet0/0/0]
Nov 21 2022 20:19:29-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[2]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, NeighborE
vent=1-Way, NeighborPreviousState=2Way, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/0]int
Nov 21 2022 20:19:34-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[3]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, NeighborE
vent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]int
Nov 21 2022 20:19:34-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[4]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.45, NeighborE
vent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/0]int G0/0/1
[r6-GigabitEthernet0/0/1]ospf timer hello 5
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:43-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[5]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:43-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[6]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:44-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[7]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbor
Event=HelloReceived, NeighborPreviousState=Down, NeighborCurrentState=Init)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:45-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[8]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:45-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[9]:Neighbor changes eve
nt: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbor
Event=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=ExStart)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[10]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:48-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[11]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:49-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[12]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=2WayReceived, NeighborPreviousState=Init, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:49-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[13]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=4.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:49-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[14]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=5.1.1.123, Neighbo
rEvent=AdjOk?, NeighborPreviousState=2Way, NeighborCurrentState=2Way)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:50-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[15]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=NegotiationDone, NeighborPreviousState=ExStart, NeighborCurrentState=Exch
ange)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:50-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[16]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=ExchangeDone, NeighborPreviousState=Exchange, NeighborCurrentState=Loadin
g)
[r6-GigabitEthernet0/0/1]
Nov 21 2022 20:19:50-08:00 r6 %%01OSPF/4/NBR_CHANGE_E(l)[17]:Neighbor changes ev
ent: neighbor status changed. (ProcessId=256, NeighborAddress=1.1.1.123, Neighbo
rEvent=LoadingDone, NeighborPreviousState=Loading, NeighborCurrentState=Full)
[r6-GigabitEthernet0/0/1]