Usage: SPFlashToolV6.exe [options]
Options:
-i, --config <config xml file> console mode configuration file,
mandatory with config.xml.
SPFlashToolV6.exe -i config.xml
-f, --flash_xml <flash xml file> flash xml file path, mandatory without
config.xml.
SPFlashToolV6.exe -c download -f
flash.xml
-c, --operation <operation> flash tool features, mandatory without
config.xml, just support:
format
download
format-download
firmware-upgrade
dram-repair
write-efuse
read-efuse
download-cert
eye-monitor
brom-adapter
SPFlashToolV6.exe -c download
-f flash.xml
-e, --cert_file <cert file> certification file path.
SPFlashToolV6.exe -e cert_file.cert -f
flash.xml -c download
-p, --com_port <com port> com port, format is as COM4+COM6 (BROM
download), COM5 (preloader download) on
Windows and format is as 5-2+1-6(BROM
download), 5-1(preloader download) on
Linux.
SPFlashToolV6.exe -p COM4+COM6
-f flash.xml -c download
SPFlashToolV6 -p 5-1+1-6 -i
config.xml
-t, --battery_mode <battery mode> Specify battery mode. with, without
and auto are available. if no specify
the -t argument, the auto mode used.
Only valid without config.xml.
SPFlashToolV6.exe -f flash.xml
-c download -t without
-b, --reboot reboot the device.
SPFlashToolV6.exe -b -i config.xml
--disable_storage_life_cycle_check disable storage life cycle check
feature.
SPFlashToolV6.exe -f flash.xml
-c download
--disable_storage_life_cycle_check
-a, --auth_file <auth file> authentication file path.
SPFlashToolV6.exe -a auth_file.auth -f
flash.xml -c download
-r, --redirect redirect debug log to parent process.
SPFlashToolV6.exe -r -i config.xml
--file <dram repair file> Specify the file which can be used for
dram-repair, read-efuse, write-efuse,
download-cert, eye-monitor and
brom-adapter command.
SPFlashToolV6.exe -f flash.xml
-c write-efuse --file efuse.xml
-l, --da_log_channel <DA log channel> Specify the DA log channel. USB and
UART are available. if no specify the
-l argument, the UART will be default
used.
SPFlashToolV6.exe -f flash.xml
-c write-efuse --file efuse.xml -l USB
--addr <operation address value> Specify the address value which can be
used for brom-adapter command.
SPFlashToolV6.exe -f flash.xml
-c brom-adapter --file ett.bin --addr
0x200000
-?, -h, --help Displays help on commandline options.
--help-all Displays help including Qt specific
options.
-v, --version Displays version