iwpriv 配置 WiFi 的参数含义解说

原文链接： http://www.cnblogs.com/khldragon/p/4634162.html

#The word of "Default" must not be removed
Default
CountryRegion=5
CountryRegionABand=7
CountryCode=
SSID=Dennis2860AP
NetworkType=Infra
WirelessMode=9
Channel=0
BeaconPeriod=100
TxPower=100
BGProtection=0
TxPreamble=0
RTSThreshold=2347
FragThreshold=2346
TxBurst=1
WmmCapable=0
AckPolicy=0;0;0;0
AuthMode=OPEN
EncrypType=NONE
WPAPSK=
DefaultKeyID=1
Key1Type=0
Key1Str=
Key2Type=0
Key2Str=
Key3Type=0
Key3Str=
Key4Type=0
Key4Str=
PSMode=CAM
FastRoaming=0
RoamThreshold=70
HT_RDG=1
HT_EXTCHA=0
HT_OpMode=1
HT_MpduDensity=4
HT_BW=1
HT_AutoBA=1
HT_BADecline=0
HT_AMSDU=0
HT_BAWinSize=64
HT_GI=1
HT_MCS=33
HT_MIMOPSMode=3
EthConvertMode=
EthCloneMac=
IEEE80211H=0
TGnWifiTest=0
WirelessEvent=0
MeshId=MESH
MeshAutoLink=1
MeshAuthMode=OPEN
MeshEncrypType=NONE
MeshWPAKEY=
MeshDefaultkey=1
MeshWEPKEY=
CarrierDetect=0

---

@> CountryRegion=value
value
0: use 1 ~ 11 Channel
1: use 1 ~ 13 Channel
2: use 10 ~ 11 Channel
3: use 10 ~ 13 Channel
4: use 14 Channel
5: use 1 ~ 14 Channel
6: use 3 ~ 9 Channel
7: use 5 ~ 13 Channel
31: use 1 ~ 14 Channel (ch1-11:active scan, ch12-14 passive scan)

一般是5，也就是active scan。

@> CountryRegionABand=value
value

7: use 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 Channel

@> CountryCode=value
value
AG, AR, AW, AU, AT, BS, BB, BM, BR, BE, BG, CA, KY, CL, CN, CO, CR, CY, CZ, DK, DO, EC, SV, FI, FR, DE,
GR, GU, GT, HT, HN, HK, HU, IS, IN, ID, IE, IL, IT, JP, JO, LV, LI, LT, LU, MY, MT, MA, MX, NL, NZ, NO,
PE, PT, PL, RO, RU, SA, CS, SG, SK, SI, ZA, KR, ES, SE, CH, TW, TR, GB, UA, AE, US, VE
“” => using default setting: 2.4 G - ch 1~11; 5G - ch 52~64, 100~140, 149~165

STA:”” AP:TW

@> SSID=value
value
0~z, 1~32 ascii characters.

@> WirelessMode=value
value
0: legacy 11b/g mixed
1: legacy 11B only
2: legacy 11A only //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
3: legacy 11a/b/g mixed //Not support in RfIcType=1(id=RFIC_5225) and RfIcType=2(id=RFIC_5325)
4: legacy 11G only
5: 11ABGN mixed
6: 11N only
7: 11GN mixed
8: 11AN mixed
9: 11BGN mixed
10: 11AGN mixed

@> Channel=value
value
depends on CountryRegion or CountryRegionABand

STA:0 AP:11

@> BGProtection=value
value
0: Auto
1: Always on
2: Always off

@> TxPreamble=value
value
0:Preamble Long
1:Preamble Short
2:Auto

@> RTSThreshold=value
value
1~2347

STA AND AP :2347 也就是没有开启RTS-CTS 2次握手

@> FragThreshold=value
value
256~2346

STA AND AP :2346 分段最大

@> TxBurst=value
value
0: Disable
1: Enable

不是很理解这个参数含义

@> NetworkType=value
value
Infra: infrastructure mode
Adhoc: adhoc mode

STA:Infra

@> AuthMode=value
value

OPEN            For open system    
SHARED          For shared key system    
WEPAUTO         Auto switch between OPEN and SHARED 
WPAPSK          For WPA pre-shared key  (Infra)  
WPA2PSK         For WPA2 pre-shared key (Infra) 
WPANONE         For WPA pre-shared key  (Adhoc) 
WPA             Use WPA-Supplicant 
WPA2            Use WPA-Supplicant

AP: WPA2PSK STA: OPEN

@> EncrypType=value
value

NONE        For AuthMode=OPEN                    
WEP         For AuthMode=OPEN or AuthMode=SHARED 
TKIP        For AuthMode=WPAPSK or WPA2PSK                    
AES         For AuthMode=WPAPSK or WPA2PSK 

AP: TKIP;AES STA: OPEN

@> DefaultKeyID=value
value
1~4

为1

@> Key1Type=vaule
Key2Type=value
Key3Type=vaule
Key4Type=vaule
value

0   hexadecimal type 
1   assic type 

(usage : reading profile only)

@> Key1Str=value
Key2Str=value
Key3Str=vaule
Key4Str=vaule
value

10 or 26 characters (key type=0) 
5 or 13 characters  (key type=1) 

(usage : reading profile only)

@> WPAPSK=value
value
8~63 ASCII
or
64 HEX characters

@> WmmCapable=value
value
0: Disable WMM
1: Enable WMM

STA:1 AP:0

Set it as 1 to turn on WMM Qos support

@> PSMode=value
value

CAM                Constantly Awake Mode 
Max_PSP            Max Power Savings 
Fast_PSP           P

ower Save Mode

STA:CAM AP:”“

@> FastRoaming=value
value
0 Disabled
1 Enabled

@> RoamThreshold=value
value
Positive Interger(dBm)

STA:70 AP:无

@> HT_RDG=value
value
0 Disabled
1 Enabled

STA:1 AP:0

@> HT_EXTCHA=value (Extended Channel Switch Announcement)
value
0 Below
1 Above

@> HT_OpMode=value
value
0 HT mixed format
1 HT greenfield format

@> HT_MpduDensity=value
value (based on 802.11n D2.0)
0: no restriction
1: 1/4 s
2: 1/2 s
3: 1 s
4: 2 s
5: 4 s
6: 8 s
7: 16 s

STA:4 AP:5

@> HT_BW=value
value
0 20MHz
1 40MHz

@> HT_AutoBA=value
value
0 Disabled
1 Enabled

@> HT_BADecline
value
0 Disabled
1 Enabled

STA:0

@> HT_AMSDU=value
value
0 Disabled
1 Enabled

@> HT_BAWinSize=value
value
1 ~ 64

STA AND AP: 64

@> HT_GI=value
value
0 long GI
1 short GI

@> HT_MCS=value
value
0 ~ 15
33: auto

@> HT_MIMOPSMode=value
value (based on 802.11n D2.0)

0                Static SM Power Save Mode 
1                Dynamic SM Power Save Mode 
2                Reserved 
3                SM enabled 

(not fully support yet)

STA:3

@> EthConvertMode=value
value
dongle
clone
hybrid

@> EthCloneMac=value
value
xx:xx:xx:xx:xx:xx

@> IEEE80211H=value
value
0 Disabled
1 Enabled

STA:0

@> TGnWifiTest=value
value
0 Disabled
1 Enabled

STA 0

@> WirelessEvent=value
value
0 Disabled
1 Enabled

STA 0

@> MeshId=value
value
Length 1~32 ascii characters

STA MESH

@> MeshAutoLink=value
value
0 Disabled
1 Enabled

STA 1

@> MeshAuthMode=value
value
OPEN For open system
WPANONE For WPA pre-shared key (Adhoc)

STA OPEN

@> MeshEncrypType=value
value
NONE For MeshAuthMode=OPEN
WEP For MeshAuthMode=OPEN
TKIP For MeshAuthMode=WPANONE
AES For MeshAuthMode=WPANONE

STA NONE

@> MeshWPAKEY=value
value
8~63 ASCII or
64 HEX characters

@> MeshDefaultkey=value
value
1~4

STA 1

@> MeshWEPKEY=value
value
10 or 26 characters
5 or 13 characters

@> CarrierDetect=value
value
0 Disabled
1 Enabled

STA 0