Panic 的例子

最新推荐文章于 2021-06-18 00:17:13 发布
最新推荐文章于 2021-06-18 00:17:13 发布
阅读量2.5k 收藏
点赞数
分类专栏： Linux kernel Debug 文章标签： c exception thread tcp debugging
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/RichardYSteven/article/details/6059837
版权

~# Unhandled kernel unalignedaccess[#1]:                                                                                         

Cpu0                                                                                                                              

$0   : 00000000 10000301 00000001c01d0000                                                                                        

$4   : c01c9f80 00000000 0000000091a8a400                                                                                        

$8   : 91a8a400 91a8a100 000000009eda2000                                                                                        

$12  : 00000001 00000000 00000044 00000000                                                                                        

$16  : 00000002 c01d0000 919c4d20c01c94e4                                                                                        

$20  : 919c4ac0 90808b54 c01c9f80909f91b0                                                                                        

$24  : 000000019081fba0                                                                                                          

$28  : 91836000 91837e00 c01c9af0c01c58d4                                                                                        

Hi   :0000000f                                                                                                                   

Lo   : f2ae0400                                                                                                                   

epc  : c01c58c4 vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]                                                                 

    Tainted:P                                                                                                                     

ra   : c01c58d4 vni_netif_SetMulticastIpv6+0x124/0x38c[kvniLite]                                                                 

Status:10000303    KERNEL EXLIE                                                                                                  

Cause:00803c10                                                                                                                   

BadVA:00000002                                                                                                                   

PrId : 01019378 (MIPS24Kc)                                                                                                       

Moduleslinked in: kvniLite(P) kmdio kmoca(P) sata kavnetplatform(P)                                                              

Processvni_netif_threa (pid: 393, threadinfo=91836000, task=9fa4a4c0,tls=00000000)                                               

Stack: c0150000 c015508c 91837e70 919c4ac0 00000000 00000000 0000060091a8a200                                                    

        0000000000000000 ff000000 00000000 00000000 919c4800 919c4ac091837e70                                                    

        c01d0000919c4ac0 00000000 00000000 00000000 c01c5cd8 9fa4a4f090d04110                                                    

        000000009082d2cc 00000001 7fffffff 00252e7d 05020200 000a080205dc0401                                                    

        0000000000000000 00000000 00000000 919c4d18 90850ca0 c01c5b3c9080985c                                                    

        ...                                                                                                                        

CallTrace:                                                                                                                        

[<c01c58c4>]vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]                                                                     

[<c01c5cd8>]vni_netif_SetPortParameters+0x19c/0x420[kvniLite]                                                                    

[<c01c699c>]vni_netif_Kthread+0x68/0xf4[kvniLite]                                                                                

[<90850ec0>]kthread+0x84/0x8c                                                                                                     

[<908140c8>]kernel_thread_helper+0x10/0x18                                                                                        

 

 

Code:28420003  1040007a  02c02021 <8e070000> 02402021 0260f809  00003021  10400016  3c03c01d

Fatalexception: panic in 5seconds                                                           

kavnet_NatOffload_enable- NAT Offload is NOTconfigured                                      

avnet:kavnet_Ioctl:NAT Offload Disable Failed - copy_from_user failed, rc=0xfffffff5         

_kavnet_NatOffload_shared_alloc()NP Physical Memory Address = 0x2ee70000, size = 32776, virtAddr = 0xbee70000

_kavnet_NatOffload_shared_alloc()NP Physical Memory Address = 0x2ee80000, size = 32776, virtAddr = 0xbee80000

kavnet_NatOffload_set_configuration-SET                                                                    

        LAN_ip=c0a80191|LAN_port=3128|WAN_bcast_ip=c0a864ff|WAN_port=80|                                     

        tcp_est_inactive_timeout=7200|tcp_pre_est_timeout=2|tcp_time_wait_timeout=120                        

Kernelpanic - not syncing: Fatalexception                                                                  

-----------------------------------                                                                          

=======================                                                                                      

STBfailurereport                                                                                           

Fatalexception                                                                                              

Cpu0                                                                                                        

$0   : 00000000 10000301 00000001c01d0000                                                                  

$4   : c01c9f80 00000000 0000000091a8a400                                                                  

$8   : 91a8a400 91a8a100 000000009eda2000                                                                  

$12  : 00000001 00000000 0000004400000000                                                                  

$16  : 00000002 c01d0000 919c4d20c01c94e4                                                                  

$20  : 919c4ac0 90808b54 c01c9f80909f91b0                                                                  

$24  : 000000019081fba0                                                                                    

$28  : 91836000 91837e00 c01c9af0 c01c58d4                                                                  

Hi   :0000000f                                                                                             

Lo   : f2ae0400                                                                                             

epc  : c01c58c4 vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]                                           

    Tainted:P     D                                                                                        

ra   : c01c58d4 vni_netif_SetMulticastIpv6+0x124/0x38c[kvniLite]                                           

Status:10000303    KERNEL EXLIE                                                                            

Cause:00803c10                                                                                             

BadVA:00000002                                                                                             

PrId : 01019378 (MIPS24Kc)                                                                                 

CallTrace:                                                                                                  

[<90808a20>]dump_stack+0x8/0x34                                                                             

[<9080e2c8>]panicked+0x7c/0xe8                                                                              

[<90857644>]notifier_call_chain+0x58/0xbc                                                                   

[<90857db0>]__atomic_notifier_call_chain+0x24/0x60                                                          

[<90857e00>]atomic_notifier_call_chain+0x14/0x20                                                            

[<90836108>]vpanic_with_regs+0x84/0x188                                                                     

[<90808a6c>]panic_with_regs+0x20/0x30                                                                       

[<90818d18>]die+0xe4/0x10c                                                                                  

[<9081a03c>]do_ade+0x370/0x37c                                                                              

[<90800404>]ret_from_exception+0x0/0x10                                                                     

[<c01c58c4>]vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]                                               

[<c01c5cd8>]vni_netif_SetPortParameters+0x19c/0x420[kvniLite]                                              

[<c01c699c>]vni_netif_Kthread+0x68/0xf4 [kvniLite]                                                          

[<90850ec0>]kthread+0x84/0x8c                                                                               

[<908140c8>]kernel_thread_helper+0x10/0x18                                                                  

 

Informationfrom userspace:

Kernellog buffer:        

 |usb 1-2.1: cp210x converter now attached to ttyUSB0

|console [ttyUSB0]enabled                         

 |usb 1-2.2: new full speed USB device using powertv-ehci and address 4

|usb 1-2.2: New USB device found, idVendor=10c4,idProduct=ea60      

 |usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 

 |usb 1-2.2: Product: CP2102 USB to UART BridgeController            

 |usb 1-2.2: Manufacturer: SiliconLabs                               

 |usb 1-2.2: SerialNumber:0001                                       

 |usb 1-2.2: configuration #1 chosen from 1choice                    

 |cp210x 1-2.2:1.0: cp210x converterdetected                         

 |usb 1-2.2: reset full speed USB device using powertv-ehci and address 4

|usb 1-2.2: cp210x converter now attached tottyUSB1                   

 |usb 1-2.3: new full speed USB device using powertv-ehci and address 5 

 |usb 1-2.3: New USB device found, idVendor=0bda,idProduct=8150        

 |usb 1-2.3: New USB device strings: Mfr=1, Product=2,SerialNumber=3   

 |usb 1-2.3: Product: Linksys USB LANAdapter                           

 |usb 1-2.3: Manufacturer: Linksys                                      

 |usb 1-2.3: SerialNumber:6985                                         

 |usb 1-2.3: configuration #1 chosen from 1choice                      

 |rtl8150 1-2.3:1.0: eth0: rtl8150 isdetected                          

 |net eth0: eth0: allmultiset                                          

 |net eth0: eth0: allmultiset                                          

 |ADDRCONF(NETDEV_UP): eth0: link is notready                          

 |net eth0: eth0: allmultiset                                          

 |IP-Config:Complete:                                                  

 |     device=eth0, addr=10.1.1.1, mask=255.255.255.0,gw=10.1.1.99,    

 |     host=zeus, domain=, nis-domain=(none),                           

 |     bootserver=255.255.255.255, rootserver=255.255.255.255, rootpath=

 |Freeing unused kernel memory: 2996kfreed                             

 |platform: module license 'Proprietary' taintskernel.                 

 |Disabling lock debugging due to kerneltaint                          

 |GPP: Initializing gpio kerneldriver                                  

 |GPP:Major:116                                                        

 |GPP: create_proc_entry() successful                                   

 |GPP: gpp_Init -Entry                                                 

 |GPP: Configured for Topanga (DRG39XX),platform=1365                  

 |GPP:Configured                                                       

 |GPP: gpp_InitSoft -Entry                                             

 |GPP: Init done -GPIO                                                 

 |GPP: driver initializationcomplete                                   

 |Unhandled kernel unalignedaccess[#1]:                                

 |Cpu0                                                                 

 |$ 0   : 00000000 10000301 00000001c01d0000                           

 |$ 4   : c01c9f80 00000000 0000000091a8a400                           

 |$ 8   : 91a8a400 91a8a100 000000009eda2000                           

 |$12   : 00000001 00000000 0000004400000000                           

 |$16   : 00000002 c01d0000 919c4d20c01c94e4                           

 |$20   : 919c4ac0 90808b54 c01c9f80909f91b0                           

 |$24   : 000000019081fba0                                             

 |$28   : 91836000 91837e00 c01c9af0c01c58d4                           

 |Hi    : 0000000f                                                      

 |Lo    :f2ae0400                                                      

 |epc   : c01c58c4 vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]    

 |    Tainted:P                                                        

 |ra    : c01c58d4 vni_netif_SetMulticastIpv6+0x124/0x38c[kvniLite]    

 |Status: 10000303    KERNEL EXLIE                                     

 |Cause :00803c10                                                      

 |BadVA :00000002                                                      

 |PrId  : 01019378 (MIPS24Kc)                                          

 |Modules linked in: kvniLite(P) kmdio kmoca(P) sata kavnet platform(P) 

 |Process vni_netif_threa (pid: 393, threadinfo=91836000, task=9fa4a4c0,tls=00000000)

|Stack : c0150000 c015508c 91837e70 919c4ac0 00000000 00000000 0000060091a8a200    

 |        00000000 00000000 ff000000 00000000 00000000 919c4800 919c4ac091837e70    

 |        c01d0000 919c4ac0 00000000 00000000 00000000 c01c5cd8 9fa4a4f090d04110     

 |        00000000 9082d2cc 00000001 7fffffff 00252e7d 05020200 000a080205dc0401    

 |        00000000 00000000 00000000 00000000 919c4d18 90850ca0 c01c5b3c9080985c    

 |        ...                                                                        

 |CallTrace:                                                                        

 |[<c01c58c4>] vni_netif_SetMulticastIpv6+0x114/0x38c[kvniLite]                     

 |[<c01c5cd8>] vni_netif_SetPortParameters+0x19c/0x420[kvniLite]                    

 |[<c01c699c>] vni_netif_Kthread+0x68/0xf4[kvniLite]                                

 |[<90850ec0>]kthread+0x84/0x8c                                                     

 |[<908140c8>]kernel_thread_helper+0x10/0x18                                        

 |                                                                                    

 |                                                                                    

 |Code: 28420003  1040007a  02c02021 <8e070000> 02402021 0260f809  00003021  10400016  3c03c01d

 |Fatal exception: panic in 5seconds                                                           

 |kavnet_NatOffload_enable - NAT Offload is NOT configured                                      

 |avnet:kavnet_Ioctl: NAT Offload Disable Failed - copy_from_user failed,rc=0xfffffff5         

 |_kavnet_NatOffload_shared_alloc() NP Physical Memory Address = 0x2ee70000, size= 32776, virtAddr = 0xbee70000

|_kavnet_NatOffload_shared_alloc() NP Physical Memory Address = 0x2ee80000, size= 32776, virtAddr = 0xbee80000

|kavnet_NatOffload_set_configuration -SET                                                                    

 |     LAN_ip=c0a80191|LAN_port=3128|WAN_bcast_ip=c0a864ff|WAN_port=80|                                        

 |     tcp_est_inactive_timeout=7200|tcp_pre_est_timeout=2|tcp_time_wait_timeout=120                           

 | Kernel panic - not syncing: Fatalexception  



kernel中哪里打印panic

暂时觉得在kernel/panic.c中

RichardYSteven
关注
专栏目录
Go 学习笔记（19）— 函数（05）[如何触发 panic、触发 panic 延迟执行、panic 和 recover 的关系]
wohu1104的专栏
04-22 2559
1. 异常设计思想 Go 语言的错误处理思想及设计包含以下特征： 一个可能造成错误的函数，需要返回值中返回一个错误接口（ error ），如果调用是成功的，错误接口将返回 nil ，否则返回错误。 在函数调用后需要检查错误，如果发生错误，则进行必要的错误处理。 Go 里没有用经典的 try/except 捕获异常。 Go 提供两种错误处理方式 函数返回 error 类型对象判断错...
panic函数c语言,【go语言学习】错误error和异常panic
weixin_30548963的博客
05-22 1747
一、错误和异常的区别错误指的是可能出现问题的地方出现了问题。比如打开一个文件时失败，这种情况在人们的意料之中 。异常指的是不应该出现问题的地方出现了问题。比如引用了空指针，这种情况在人们的意料之外。可见，错误是业务过程的一部分，而异常不是 。二、错误演示go语言中，错误是一种数据类型，使用内置的error类型，和其他数据类型一样使用。package mainimport ("fmt""os")fu...
根据epc 报错定位linux kernel panic位置
12-10
关于内核报错 “Unable to handle kernel paging request at virtual address” 的问题, 绝大多数都是由于程序使用了不可用的指针而引起的, 定位这类问题的办法很简单,也希望我的描述足够简单实用. 由韩大卫@吉林师范 提供, 0分资源共享!
kernel panic解法实例
chenyan1263530170的专栏
12-30 470
在为路由器开发XX号令过程中，内核中需要编写获取数据模块 模块运行时，遇到kennel panic ,现在贴出图来 遇到的kenel panic  分析Unable to handle kernel paging request at virtual address 00000002克制应该是空指针问题 接下来界定是拿个位置引入空指针 把内核添加-g选项，然后编译出错的模块
Mips内核调试遇到Unhandled kernel unaligned access[#1]:以及BadVA : dead4ead
书生的博客
09-09 9740
在内核加了netfilter的一个match功能，分析Http数据包。 通过五元组，tcp seq形成链表将分段的http报文进行重组，在一定时间超时后就删掉报文。 调试过程中遇到如下错误：[ 80.484000] Unhandled kernel unaligned access[#1]: [ 80.484000] Cpu 0 [ 80.484000] $ 0 : 000000
linux C错误汇集
weixin_34343689的博客
07-24 276
问题一： 22.c: In function ‘main’:22.c:8:9: error: empty character constant　　解决方法：少了空格     问题2.  没有连接到math函数库 　　gcc 12.c -o 12 -lm     问题3.segment fault 1.内存访问越界  a) 由于使用错误的下标，导致数组访问越界  b) 搜索字符...
内存未对齐（Unaligned access mips sh4linux QtWebkit）导致性能降低及其处理
04-19 4300
内存未对齐是指cpu要读取N字节数据，但数据的起始地址不能被N所整除，导致效率降低，甚至异常的出现。例如当cpu读取一个int类型的变量，而变量地址是0x10005的时候就产生未对齐访问。 自然对齐:     N字节的数据类型需要放在起始地址为被N整除的地址这称为自然对齐。并不是所有体系结构的计算机带都要求自然对齐，有的可以指定对齐方式。但是为了达到好的可移植性编写代码的时候最好都用自然对齐方
go语言的panic和recover函数用法实例
09-19
在这个例子中，`panic`被触发后，`main`函数中`defer`语句被执行，但由于没有使用`recover`，goroutine最终仍然会崩溃。 ##### 示例2: 使用recover捕获panic ```go package main import "fmt" func main() { ...
assert_panic_free
03-04
例子 通过优化/发布构建时有效： assert_panic_free::assert_panic_free(|| 32); 不起作用： assert_panic_free(|| panic!(":(")); 受和启发，但我想要一些可以实现细粒度恐慌减少的东西（例如no_panic），但也...
golang关于panic的解析
weixin_42847293的博客
06-18 2385
panic解析： 关于panic，接下来主要讲panic的执行机制和顺序； 与defer是相辅相成的： 首先，通过上一节我们知道，多个defer组成列表挂在当前协程的成员变量_defer下的。 同理在goroutine结构体上还有个字段是用来挂接多个_panic结构体的。 学习时间： 提示：这里可以添加计划学习的时间 例如： 1、 周一至周五晚上 7 点—晚上9点 2、 周六上午 9 点-上午 11 点 3、 周日下午 3 点-下午 6 点 学习产出： 提示：这里统计学习计划的总量 例如： 1、 技术笔记
MIPS指令集：寄存器
海棠花的博客
03-14 1万+
   不同的计算机架构中寄存器的种类和数量也不相同。MIPSmips中用到的寄存器按照功能分为有通用寄存器、协处理器0、浮点寄存器、乘法部件寄存器。通用寄存器共32个，是没有特殊限制，一般程序员可以使用的寄存器。协处理器0寄存器也叫控制寄存器，共32个，用来控制并管理CPU。浮点寄存器和乘法部件寄存器都是专用寄存器。浮点寄存器也叫协处理器1寄存器，共32个，用来存储和浮点计算相关的数据。乘法部件...
Linux 开机提示kernel panic...解决方法
ForeverDWYW的博客
05-17 1万+
原因极可能是：“在设置selinux的时候，是不是位置写错了，应该修改SELINUX行，而不是SELINUXTYPE”问题：开机提示“Kernel panic - not syncing: Attempted to kill init!” 解决方案：１、强制重启，编辑grub启动选项，按Ｅ键，选中kernel开头的行，再按Ｅ键，在最后添加enforcing=0,２、按Ｂ键重启，３、系统正常启动后，...
Linux kernel panic问题解决方法
热门推荐
激情成就梦想--关注移动互联网
06-11 5万+
Linux kernel panic释疑kernel panic错误表现kernel panic 主要有以下几个出错提示：Kernel panic-not syncing fatal exception in interruptkernel panic - not syncing: Attempted to kill the idle task!kernel panic - not syncing: killing interrupt handler!Kernel Panic - not syncing：A
处理Linux Kernel Panic错误故障
weixin_33862188的博客
11-18 246
Linux主机突然无法远程连接,本地显示器显示Kernel Panic 错误（是因为硬件的原因或驱动故障），并且默认的系统会停在那里，直到你去重新启动它。 处理方法： #vi /etc/sysctl.conf kernel.panic = 10 配制生效 #sysctl -p 来告诉系统从Panic错误中自动重启，等待时间为10秒:) 原文出自 http:/...
编译选项导致死机（Unaligned userspace access in "XXX.exe" ）
09-05 1083
最近调试st7162，在运行中偶然出现死机现象，报Unaligned userspace access in "xxx.exe" pid=1247 pc=0x0041e80c ins=0x2c02 该问题主要是第三方库和自己的编译选项不一致造成的，统一编译选项就可以解决这类问题，主要有关系的编译选项有：-O2 -Wno-deprecated
panic("a")
最新发布
06-13
在这个例子中，`defer` 语句内的匿名函数会在 `main` 函数返回之前调用，尝试捕获并处理 `panic`。如果没有发生 panic，`recover` 将返回 `nil`。当 `panic("a")` 执行时，程序会立即停止，不会执行到 `defer` 语句...
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值