H3C设备配置端口镜像

 一、配置本地端口镜像  

1、交换机配置：

<H3C>system-view  //进入系统视图
[H3C]sysname SWA  //更改设备名
[SWA]mirroring-group 1 local  //创建本地镜像组
[SWA]mirroring-group 1 mirroring-port g1/0/1 to g1/0/2 both  //设置g1/0/1与g1/0/2为镜像组1的源端口，并镜像双向流量
[SWA]mirroring-group 1 monitor-port g1/0/3  //设置g1/0/3为本地镜像组1的目的观察口
[SWA]interface g1/0/3  //进入g1/0/3端口
[SWA-GigabitEthernet1/0/3]undo stp enable  //关闭stp服务
[SWA-GigabitEthernet1/0/3]quit  //返回上一级

2、使用display mirroring-group all查看镜像组的配置信息。

二、配置远程端口镜像  

实验拓扑：

1、SWA源交换机配置

<H3C>system-view  //进入系统视图
[H3C]sysname SWA  //更改设备名
[SWA]mirroring-group 1 remote-source  //创建远程源镜像组
[SWA]vlan 10      //创建vlan 10
[SWA-vlan10]undo mac-address mac-learning enable  //关闭mac地址学习功能
[SWA-vlan10]quit  //返回上一级
[SWA]mirroring-group 1 remote-probe vlan 10   //配置远程源镜像组的远程镜像vlan为vlan10
[SWA]mirroring-group 1 mirroring-port GigabitEthernet 1/0/2 to GigabitEthernet 1/0/3 both  //配置g1/0/2与1/0/3为镜像源端口双向流量
[SWA]mirroring-group 1 reflector-port GigabitEthernet 1/0/6 //配置反射端口
This operation may delete all settings made on the interface. Continue? [Y/N]: y
[SWA]interface GigabitEthernet 1/0/1   //进入g1/0/1端口
[SWA-GigabitEthernet1/0/1]port link-type trunk  //设置接口类型为trunk
[SWA-GigabitEthernet1/0/1]port trunk permit vlan 10 //放行vlan 10
[SWA-GigabitEthernet1/0/1]quit  //返回上一级
[SWA]save force   //保存配置

2、SWB中间交换机配置

<H3C>system-view  //进入系统视图
[H3C]sysname SWB  //更改设备名
[SWB]vlan 10      //创建vlan 10
[SWB-vlan10]undo mac-address mac-learning enable  //关闭mac地址学习功能
[SWB-vlan10]quit  //返回上一级
[SWB]interface GigabitEthernet 1/0/1  //进入g1/0/1端口
[SWB-GigabitEthernet1/0/1]port link-type trunk       //设置接口类型为trunk
[SWB-GigabitEthernet1/0/1]port trunk permit vlan 10  //放行vlan 10
[SWB-GigabitEthernet1/0/1]quit  //返回上一级
[SWB]interface GigabitEthernet 1/0/2  //进入g1/0/2端口
[SWB-GigabitEthernet1/0/2]port link-type trunk       //设置接口类型为trunk
[SWB-GigabitEthernet1/0/2]port trunk permit vlan 30  //放行vlan 10
[SWB-GigabitEthernet1/0/2]quit  //返回上一级
[SWB]save force   //保存配置

3、SWC目的交换机配置

<H3C>system-view  //进入系统视图
[H3C]sysname SWC  //更改设备名
[SWC]mirroring-group 1 remote-destination  //创建远程目的镜像组
[SWC]vlan 10      //创建vlan 10
[SWC-vlan10]undo mac-address mac-learning enable  //关闭mac地址学习功能
[SWC-vlan10]quit  //返回上一级
[SWC]mirroring-group 1 remote-probe vlan 10   //配置远程源镜像组的远程镜像vlan为vlan10
[SWC]interface GigabitEthernet 1/0/2  //进入g1/0/2端口
[SWC-GigabitEthernet1/0/2]mirroring-group 1 monitor-port  //配置为目的端口
[SWC-GigabitEthernet1/0/2]undo stp enable   //关闭stp服务
[SWC-GigabitEthernet1/0/2]port access vlan 10  //设置为Access类型放行vlan 10
[SWC-GigabitEthernet1/0/2]quit  //返回上一级
[SWC]interface GigabitEthernet 1/0/1  //进入g1/0/1端口
[SWC-GigabitEthernet1/0/1]port link-type trunk  //设置接口类型为trunk
[SWC-GigabitEthernet1/0/1]port trunk permit vlan 10  //放行vlan 10
[SWC-GigabitEthernet1/0/1]quit  //返回上一级
[SWC]save force   //保存配置

4、使用display mirroring-group all查看镜像组的配置信息。

SWA源交换机

SWC目的交换机