ensp RIP V2实验

要求如图

开始规划地址

 

配置各路由器ip：

[r1]int lo0
[r1-LoopBack0]ip add 192.168.1.65 27
[r1-LoopBack0]int lo1
[r1-LoopBack1]ip add 192.168.1.97 27
[r1-LoopBack1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip add 192.168.1.1 30
 

[r2]int lo0
[r2-LoopBack0]ip add 192.168.1.129 27
[r2-LoopBack0]int lo1
[r2-LoopBack1]ip add 192.168.1.161 27
[r2-LoopBack1]int g0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.1.2 30
[r2-GigabitEthernet0/0/0]int g0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.5 30
 

r3]int lo0 
[r3-LoopBack0]ip add 3.3.3.3 24
[r3-LoopBack0]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 192.168.1.6 30
[r3-GigabitEt