探索cmd调编译器的方式实现数组转二进制文件

        本文主要介绍一个综合运用各种编程工具“将数组转换为二进制文件”的探索案例。事实上，通过纯C/C++编程的方式，也能解决这个问题，但是，本文想强调的是，在实际工作中，需要发散思维和探索精神，能够想出一些新鲜的idea，权当一个coder的自娱自乐。

一、需求介绍

         某日，DSP工程师提出一个需求：应用程序（上位机）根据用户的选择，通过驱动实时加载对应版本的DSP程序到DSP芯片（下位机）。DSP工程师提供的DSP程序是由CCS（一个IDE工具）生成的“*.h”文件，该文件包含一些注释和一个数组，如下（截取部分）：

/ *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
//typedef unsigned char uint8_t;
uint8_t bootCode[] = {
0x80, 0x00, 0xF6, 0xE0, 0x00, 0x00, 0xFE, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x04, 0x03, 0xE2, 0x92, 0x46, 0x0C, 0x6E, 0x00, 0x8C, 0xA3, 0x62, 
0x02, 0x28, 0x03, 0xE2, 0x92, 0x46, 0x0C, 0x6E, 0x00, 0x8C, 0xA3, 0x62, 0x02, 0x44, 0x03, 0xE2, 0xE2, 0x40, 0x00, 0x00, 0x92, 0x46, 0x0C, 0x6E]

注：该数组就是DSP程序，需要转换成二进制码，load到DSP芯片中。真实的code数组比这个大的多，达几十k。