Pre-suite 开发之MFi功能搭建

最新推荐文章于 2024-08-12 16:46:47 发布
最新推荐文章于 2024-08-12 16:46:47 发布
阅读量1k 收藏 23
点赞数 26
分类专栏： Pre-suite 文章标签： dsp开发
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/SnowYang2017/article/details/135067818
版权
Pre-suite 专栏收录该内容
11 篇文章 0 订阅 ¥299.90 ¥399.90
订阅专栏
本文介绍了Ezairo 7160sl在Pre-suite开发中的MFi功能搭建，包括硬件连接、软件设置和测试验证。硬件认证需要E7160sl配合Apple指定的认证芯片，并详细说明了单耳和双耳配置的步骤，以及如何验证功能有效性。
摘要由CSDN通过智能技术生成

序言

        Pre-suite 固件中只有带无线硬件的Ezairo 7160sl才具备无线通信能力，其无线功能包括标准BLE 5.2 低功耗蓝牙功能以及非标准的低功耗无线音频流功能。

        Ezairo 7160sl 支持3种低功耗无线音频流协议：来自APPLE的MFi，来自Google的ASHA以及来自onsemi的remote mic。其中MFi音频流走的G.722编码的Mode1，速率为64kbps；而非MFi音频流走的G.722的Mode3，速率为48kbps.

         在SD配置上，每个程序档均可单独使能无限音频流功能，通用设置为：Wireless Enable设置为Enable, Auxiliary Input设置为Wireless Audio。其余参数根据使用不同协议设置稍有不同，具体参考各协议章节。Pre-suite开发之ASHA功能搭建

        根据AAPPLE官方要求，从2021年1月1日开始，只接受MFi硬件认证。硬件认证可支持通话功能。

了解本专栏 订阅专栏 解锁全文
SnowYang2017
关注
专栏目录
订阅专栏
【AirPlay】苹果认证MFI学习
天天的博客
02-28 1373
配件认证是一个过程，通过这个过程，可验证其配件符合MFi技术规范，并通过苹果指定的任何认证测试。MFi门户中的产品计划 "认证 "页面将指导你完成特定配件所需的认证步骤，并指出何时完成所有要求。在完成所有MFi认证要求之前，你不得制造、分发或销售任何配件。在开始MFi认证过程之前，你必须测试你的配件，以确保它符合最新的MFi技术规范，通过产品计划 "测试计划 "上的所有适用测试，并与它将声称具有兼容性的每个苹果设备兼容。
知识点滴 - 关于苹果认证MFI
guoqx的专栏
07-06 6536
配件的MFi合规性审计，MFi门户网站的产品计划"认证"页面将指导你完成步骤，将production-ready的样品和所需的材料运送到适当的地点，以便进行配件MFi合规性审计。MFi门户的产品计划"认证"页面将提示你选择MFi授权的测试实验室，该实验室将为你的配件进行必要的测试服务。一旦配件完成了MFi认证要求，并且配件开发商/制造商已经向苹果报告了它的销售/分销情况（按季度），或者该配件是可选的，它将可以在我们的授权Lightning、耳机、充电和基于iAP的MFi配件公共数据库中搜索到。...
IOS开发之——蓝牙通信浅谈
热门推荐
在代码身上，用心去飞翔
04-17 1万+
故事背景： 为什么要研究IOS的蓝牙呢？ 答：当然是工作需要啦，公司有个项目是做心电测量的，主要就是通过手持嵌入式设备测量心电，通过蓝牙将数据传送到手机（安卓，IOS），然后手机端解析数据包并绘制曲线，最后上传到服务器保存。目前已经完成了安卓设备的APP开发工作，支持大多数的主流安卓设备（主要安卓各厂商的蓝牙不同，完全兼容希望不大），然后Boss就打算继续开发IOS的版本了，遂让我这个做QT的
苹果MFI认证SPEC
05-13
苹果MFI认证，开发苹果周围设备必用的参考资料协议
iPod+Authentication+Coprocessor+Spec+2.0C+R1
05-30
iPod+Authentication+Coprocessor+Spec+2.0C+R1Contents Chapter 1 Introduction 7 Overview 7 Authentication protocol 7 Terminology Used in This Document 8 General Specification Terms 9 s Related documents 9 Chapter 2 Signal Descriptions and Reference Circuit 11 CP Signals and Pinouts 11 Address selection 12 Reference circuit 12 Chapter 3 Hardware Configuration and Interface 13 System Voltage/ 13 Startup of the 12C Interface/13 Starting Up the cp by turning power on /13 Starting Up the Cp by Warm Reset 14 Communication Process15/ Low-Power Sleep Mode-16 Chapter 4 Coprocessor Registers 17 Register Addresses 17 Register Descriptions 19 Device version 19 Firmware version 19 Authentication Protocol Major and Minor Versions 20 Device iD 20 Error Code 20 Authentication Control and status 21 Signature Data Length 22 Signature Data 22 hallenge Data Length 23 Challenge data 23 Accessory Certificate Data Length 23 Accessory Certificate Data 23 Self- Test Control and status 23 System Event Counter 24 Apple Device Certificate Data Lengt 3 2011-06-22 I @2011 Apple Inc. All Rights Reserved. CONTENTS Apple device certificate data 25 Chapter 5 Authentication Data flows 27 Apple Device Authentication of Accessory 27 Accessory Authentication of the Apple Device 28 Chapter 6 12C Communication Protocol 31 Slave selection and reset 31 s Coprocessor Busy. 31 Writing to the Coprocessor 31 Reading from the Coprocessor 32 Chapter 7 CP Device Characteristics 33 Physical Configuration 33 Maximum Environmental Conditions 33 Recommended Operating Conditions 34 12C Interface Characteristics 34 DC Electrical Characteristics 34 Timing Characteristics 35 ppendix a Coprocessor 2.0B to 2.0C Migration Guide 37(Ay Only 12C Communication Protocol 37 Increased SCL Speed 37 Shorter Reset Cycle 37 Warm Reset Supported 37 Automatic Sleep State Entry and Exit 38 NACK Responses Replace Clock Stretching 38 Shorter Accessory Certificate Data 38 System Event Counter Must Be Zero Betore Power-Down 38 Document Revision History 39 2011-06-22 I @2011 Apple Inc. All Rights Reserved. igures and Tables Chapter 1 Introduction 7 Table 1 Document-specific terminology 8 Chapter 2 Signal Descriptions and Reference Circuit 11 Fi ure 2-1 CP chip pinouts, top view 11 Figure 2-2 Reference circuit for CP 12 Table 2-1 CP signals 11 Table 2-2 Address se n signals 12 Chapter 3 Hardware Configuration and Interface 13 Figure 3-1 P2C interface startup timing 1 Figure 3-2 1C interface warm reset timing 15 Fi gure 3-3 12C slave write address 15 Figure 3-4 12C slave read address 15 Chapter 4 Coprocessor Registers 17 Figure 4-1 Authentication Control and Status register, read-only bits 21 igure 4-2 Fi Authentication Control and Status register, write-only bits 21 Figure 4-3 Self-test Control and Status register, write-only bits 23 Figure 4-4 Self-test Control and Status register, read-only bits/24 Table 4-1 iPod Authentication Coprocessor 2.0C register map 17 Table 4-2 Error codes 20 Table 4-3 Authentication ERR SET values 21 Table 4-4 Authentication PROC RESULTS values 21 Table 4-5 Authentication Proc control values 22 Table 4-6 Self-test proc control values 24 Table 4-7 Self-test result bits 24 Chapter 5 Authentication Data flows 27 Table 5-1 Sequence of interactions by which an Apple device authenticates an accessory 27 Table 5-2 Sequence of interactions by which an accessory authenticates an Apple device 28 5 2011-06-22 I @2011 Apple Inc. All Rights Reserved. FIGURES AND TABLES Chapter 7 CP Device Characteristics 33 Figure 7-1 Authentication coprocessor 2. 0C package 33 Figure 7-2 Typical 1/0 port input waveform 35 Table 7 Maximum electrical and temperature ranges 34 Table 7-2 Recommended operating conditions 34 Table 7-3 I2C interface ranges 34 Table 7-4 Supply current into VcC, excluding external current 35 Table 7 Inputs 35> Table 7-6 Outputs 35 Table 7-7 Values for Figure 7-236 2011-06-22 I @2011 Apple Inc. All Rights Reserved. CHAPTER 1 Introduction N IOTICE OF PROPRIE TARY PROPERTY THE INFORMATION CONTAINED HEREIN IS THE PROPRIETARY PROPERTY OF APPLE INC. THE POSSESSOR AGREES TO THE FOLLOWING: (DTO MAINTAIN THIS DOCUMENT IN CONFIDENCE (ID NOT TO REPRODUCE OR COPY IT, (IID NOT TO REVEAL OR PUBLISH IT IN WHOLE OR IN PART, (IV) ALL RIGHTS RESERVED ACCESS TO THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN IS GOVERNED BY THE TERMS OF THE MFI LICENSE AGREEMENT AND/OR THE IPOD-IPHONE AIS EVALUATION AGREEMENT. ALL OTHER USE SHALL BE AT APPLES SOLE DISCRETION Note: This document uses the term"Apple device"to refer generically to iPods, iPhones, and iPads, all of which support the iPod Accessory Protocol (iAP) interface. Among these products, those that also run iOS (Apples mobile operating system)are referred to as"ioS devices. "Specifications in this document that are designated for ioS devices apply only to those products Specifications designated for iPods apply only to Apple devices that are not ios devices. Overview device by issuing an authentication challenge to the accessory the accessory must respond to the apol o An Apple device verifies whether a third-party accessory attached to it is authorized for use with the apple device's challenge, and it can do so only with the assistance of an iPod Authentication Coprocessor( CP) chip located in the accessory. Conversely, the accessory can use its CP chip to authenticate the iPod. Certain control and reporting functions of the apple device are made available externally only after it has authenticated an attached accessory as being authorized Earlier versions of the ipod authentication Coprocessor(1.0, 2.0A, and 2.0B)were implemented in QFN-40 QFN-20, and sop-8 packages. The current version, 2.0C, is supplied in a smaller and more efficient PG-USON-8-1 ackage. This document describes the configuration, usage, and specifications of Apple's iPod Authentication Coprocessor 2.00 Authentication Protocol The authentication protocol supported by the iPod Authentication Coprocessor 2.0C is based on standard X509 version 3 certification. Each certificate is generated and signed by a recognized certificate authority and has a unique serial number. Information about the X509 standard can be found at the letf website http://tools.ietf.org/html/3280 For information about the iAP General lingo commands required to perform authentication using the ipod Authentication Coprocessor 2.0C, see apple's MFi Accessory Firmware Specification Overview 2011-06-22 I @2011 Apple Inc. All Rights Reserved. CHAPTER 1 Introduction The iPod Authentication Coprocessor 2.0C supports iAP General lingo commands Ox14 through Ox1E providing five authentication-related services: For Apple device authentication of the accessory: Certificate delivery: To initiate authenticatication of the accessory that contains it, the Cp supplies an X 509 digital certificate for public key verification by the attached apple device Signature generation: To complete authentication of the accessory that contains it, the Cp generates valid digital signature in response to a challenge from an attached Apple device This signature authorizes the apple device to respond to messages and commands from the accessory For accessory authentication of the apple device: Apple device certificate validation: To initiate the authentication of an Apple device attached to an accessory, the CP verifies that the X509 certificate supplied by Apple device has been signed by the proper certificate authority. Challenge generation: To continue the authentication of an Apple device attached to an accessory, the accessory's CP can generate a challenge to be sent to the apple device Signature verification: To complete the authentication of an Apple device attached to the accessory the Cp can verify the signature returned by the apple device in response to the previous challenge Terminology Used in This Document Certain technical terms specific to this document are defined in table 1-1 Table 1-1 Document-specific terminology Teri Definition Accessory controller The microcontroller in an accessory responsible for implementing application-specific logic. Authenticatⅰon a device in an accessory controller that provides apple device-related digital coprocessor signature creation and verification services Challenge A random number sent via iAP from an apple device to an accessory controller, or vice versa. the device being challenged must perform a digital signature computation on the offered challenge and return the resulting digital signature to the challenging device for verification. Digital signature he result obtained by performing a digital signing process on an offered challenge IAP od Accessory Protocol. See Apple's MFi Accessory Firmware Specification 12C b A 2-wire serial bus designed by philips to allow easy communication between components that reside on the same circuit board. The l2C specification is located Ithttp://www.semiconductors.philipscom/acrobat_download/itera ture/9398/39340011pdf Terminology Used in This Document 2011-06-22 I @2011 Apple Inc. All Rights Reserved. CHAPTER 1 Introduction Ter Definition X 509 certification/ A standard defined by the International Telecommunication Union(ITU)that governs the format of certificates used for authentication and sender identity verification in public-key cryptography. X509 certificates contain the public keys used in the apple device's accessory authentication process General Specification terms Parts of this document contain specification requirements that are incorporated by reference into legal agreements between Apple Inc and its licensees. the use of the words"must, " "should " and "may"in these specifications have the following meanings Must"means that the specification is an absolute requirement Must not"means that the specification is an absolute prohibition Should"means that there may be valid reasons in particular circumstances to ignore the specification, but their full implications must be understood and carefully weighed before choosing to do so Should not"means that there may be valid reasons in particular circumstances that make the specifie action or feature acceptable but their full implications must be understood and carefully weighed before choosing to include it May"means that the indicated action or feature does not contravene this specification Related documents For further information about authenticating Apple devices and their attached accessories, see apple's MFi Accessory Firmware Specification and MFi Accessory Hardware Specification Related documents 9 2011-06-22 I @2011 Apple Inc. All Rights Reserved. CHAPTER 1 Introduction Related documents 2011-06-22 I@ 2011 Apple Inc. All Rights Reserved.
Pre-suite开发之ASHA功能搭建
SnowYang2017的博客
12-06 1592
本文主要阐述如何使用SDK V2.1.2 版本搭建ASHA单功能模块
Pre-suite开发之开发板使用
SnowYang2017的博客
12-01 474
本文讲解如何开启Pre-suite开发的第一步，验证软硬件环境是否打通，是正常进行开发的前提。如开发中遇到问题，可以回到本文进行第一步的复验以排除开发环境安装不当导致的问题
Pre-suite 是什么？
SnowYang2017的博客
11-15 210
本文对安森美Ezairo pre-suite平台进行简单介绍，收录与pre-suite专栏，更多关于pre-suite开发文章均收录于该专栏
MFi-Accessory-Specification.rar_MFi_MFi Accessory_accessory_mfi
07-15
7. **测试流程**：在产品开发过程中，制造商需要按照MFi测试套件进行各项功能和性能测试，包括环境测试（如温度、湿度）、耐久性测试（如插拔次数）、以及兼容性测试等，以确保产品满足苹果的高标准。 8. **知识...
Authentication Coprocessor_coprocessor_authentication_
10-04
AnAppledeviceverifieswhetherathird-partyaccessoryattachedtoitisauthorizedforusewiththeApple devicebyissuinganauthenticationchallengetotheaccessory.TheaccessorymustrespondtotheApple device'schallenge
苹果设备认证芯片2.0C
02-27
苹果附件设备认证芯片手册2.0C版本，附件开发者必备资料
苹果MFI bluetooth认证开发过程：iDevice和accessory
比特人生的专栏
04-20 1万+
苹果MFI bluetooth认证开发过程：iDevice和accessory
GD32 ADC配置跳坑
08-12 368
不同的模式选择可能会导致ADC存在读取失败的问题，红色部分是常用的模式，一般可以读取到相应的ADC的值。DMA配置放在ADC配置后面可以正常读取ADC的值。放在后面读取ADC值失败。：时钟使能配置需在ADC前面。GD32 ADC配置跳坑。
apache-tomcat-8.5.98-windows-x64.zip
09-27
apache-tomcat-8.5.98-windows-x64.zip
基于Springboot和Vue的疫情管理系统源码 疫情管理系统代码（程序，中文注释）
09-27
疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统-疫情管理系统 1、资源说明：疫情管理系统源码，本资源内项目代码都经过测试运行成功，功能ok的情况下才上传的。 2、适用人群：计算机相关专业(如计算计、信息安全、大数据、人工智能、通信、物联网、自动化、电子信息等)在校学生、专业老师或者企业员工等学习者，作为参考资料，进行参考学习使用。 3、资源用途：本资源具有较高的学习借鉴价值，可以作为“参考资料”，注意不是“定制需求”，代码只能作为学习参考，不能完全复制照搬。需要有一定的基础，能够看懂代码，能够自行调试代码，能够自行添加功能修改代码。 4. 最新计算机软件毕业设计选题大全(文章底部有博主联系方式): https://blog.csdn.net/2301_79206800/article/details/135931154 技术栈、环境、工具、软件： ① 系统环境:Windows ② 开发语言：Java ③ 框架：SpringBoot ④ 架构:B/S、MVC ⑤ 开发环境:IDE
暴风电视刷机数据 40X 机编600000MW303 600000MWG03 风UI1.0升风UI3.0 强制升级
最新发布
09-27
务必确认机身编号与文件名机编一致，如不一致，请勿下载 机身编号一般在机子背面的贴纸上 MSD6A338平台升级步骤 强制升级（不开机强制升级）： 1、下载数据，压缩包解压，将BFTVUpdate338.bin拷贝至U盘根目录下，插入电视USB端口 2、插拔下电源，按一下遥控器待机键后快速不停的点按遥控器上键触发主板识别U盘软件进行升级 3、升级成功需运行至100%，此时耐心等待电视自动操作，切勿断电或拔掉U盘 4、系统升级后第一次重启系统需要3分钟左右，属于正常现象，切勿断电 升级完成后可以在系统设置——本机信息——查询软件版本更新状态 注意： 1、U盘要求使用FAT32格式，建议4G-8G的品牌U盘，刷机成功率会高 2、升级到结束，大约需要8-30分钟，中途绝对不能断电 3、升级重启第一次进入系统，请等完全正常进入开机桌面之后，才能拨下U盘
Apple MFI 附件开发规则与定义
莫伊撰写的《Apple MFI附件规则与定义》是一份详细描述Apple MFI附件的规范...总体而言，莫伊的《Apple MFI附件规则与定义》文件详细介绍了Apple MFI附件的规范和开发规则，对开发者和制造商来说是一份重要的参考资料。
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

SnowYang2017

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值