、
一: ip规划
二:配置路由,l2只配置ip地址没有其他配置
三:r1/2/3之间搭建mgre环境
[r1]interface Tunnel 0/0/0
[r1-Tunnel0/0/0]ip add 10.1.1.1 24
[r1-Tunnel0/0/0]tunnel-protocol gre p2mp
[r1-Tunnel0/0/0]source 12.1.1.1
Dec 31 2022 20:43:05-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r1-Tunnel0/0/0]nhrp entry multicast dynamic
[r1-Tunnel0/0/0]nhrp network-id 100
R2
[r2]interface Tunnel 0/0/0
[r2-Tunnel0/0/0]ip address 10.1.1.2 24
[r2-Tunnel0/0/0]tunnel-protocol gre p2mp
[r2-Tunnel0/0/0]source s4/0/0
Dec 31 2022 20:46:12-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r2-Tunnel0/0/0]nhrp network-id 100
[r2-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register
R3
[r3]interface Tunnel 0/0/0
[r3-Tunnel0/0/0]ip address 10.1.1.2 24
[r3-Tunnel0/0/0]tunnel-protocol gre p2mp
[r3-Tunnel0/0/0]source s4/0/0
Dec 31 2022 20:46:12-08:00 r3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface Tunnel0/0/0 has entered the UP state.
[r3-Tunnel0/0/0]nhrp network-id 100
[r3-Tunnel0/0/0]nhrp entry 10.1.1.1 12.1.1.1 register
r1-r2 进行HDLC封装配置
r2-r3 进行ppp封装 pap认证 r2为主认证方
r2 - r4 封装,chap认证 r2为主认证方
四:OSPF和缺省路由
R1
[r1]ip route-static 0.0.0.0 0 12.1.1.2
[r1]OSPF 1 router-id 1.1.1.1
[r1-ospf-1]area 0
[r1-ospf-1-area-0.0.0.0]network 10.1.1.1 0.0.0.0
[r1-ospf-1-area-0.0.0.0]network 192.168.1.1 0.0.0.0
R2
[r2]ip route-static 0.0.0.0 0 22.1.1.2
[r2]ospf 1 router-id 2.2.2.2
[r2-ospf-1]area 0
[r2-ospf-1-area-0.0.0.0]network 10.1.1.2 0.0.0.0
[r2-ospf-1-area-0.0.0.0]network 192.168.2.1 0.0.0.0
R3
[r3]ip route-static 0.0.0.0 0 32.1.1.2
[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 10.1.1.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 192.168.3.1 0.0.0.0
全网ping通