华为设备MAC地址配置命令

[Huawei]mac-address static 1-2-3 GigabitEthernet 0/0/1 vlan 10 //添加静态MAC表项
[Huawei]display mac-address static //查看配置的静态MAC表项
[Huawei]mac-address blackhole 1-2-3 vlan 10 //添加黑洞MAC表项
[Huawei]display mac-address blackhole //查看配置的黑洞MAC表项
[Huawei]mac-address aging-time 300 //配置动态MAC表项的老化时间,取值范围是0，10～1000000秒，缺省300秒,0表示不老化。
[Huawei]display mac-address aging-time //查看动态MAC表项的老化时间
[Huawei-GigabitEthernet0/0/1]mac-address learning disable //在接口上关闭MAC地址学习功能,缺省情使能
[Huawei-GigabitEthernet0/0/1]mac-address learning disable action discard //关闭MAC地址学习功能,对报文的源MAC地址进行匹配，匹配时进行转发，不匹配时，丢弃该报文
[Huawei-GigabitEthernet0/0/1]mac-address learning disable action forward //关闭MAC地址学习功能的缺省为forward，即对报文进行转发
[Huawei-vlan10]mac-address learning disable //在VLAN上关闭MAC地址学习功能,缺省是使能
[Huawei-GigabitEthernet0/0/1]mac-limit maximum 100 //限制接口的MAC地址学习数,缺省不限制
[Huawei-GigabitEthernet0/0/1]mac-limit alarm disable //配置当MAC地址数达到限制后不进行告警,缺省进行告警
[Huawei-vlan10]mac-limit maximum 100 //限制VLAN的MAC地址学习数,缺省不限制
[Huawei-vlan10]mac-limit alarm disable //配置当MAC地址数达到限制后不告警,缺省进行告警
[Huawei]display mac-limit //查看MAC地址学习数限制信息
[Huawei]mac-address threshold-alarm upper-limit 80 lower 70 //配置MAC表资源使用的告警阈值,缺省分别为80%和70%
[Huawei]mac-address trap notification interval 10 //配置设备对MAC地址发生学习或老化的检查周期,缺省为10秒
[Huawei-GigabitEthernet0/0/2]mac-address trap notification all //能MAC地址学习和老化的告警功能,缺省未使能
[Huawei]mac-address trap hash-conflict enable //使能设备MAC地址Hash冲突上报告警的功能,缺省未使能
[Huawei]display current-configuration //查看交换机是否配置MAC地址告警功能
[Huawei-GigabitEthernet0/0/2]mac-learning priority 0 //配置接口学习MAC地址的优先级,缺省为0，越大越高
[Huawei-GigabitEthernet0/0/2]mac-learning priority flapping-defend action discard //置禁止MAC地址漂移时报文的处理动作为丢弃,缺省是转发
[Huawei]undo mac-learning priority 0 allow-flapping //配置不允许相同优先级的接口发生MAC地址漂移,缺省允许
[Huawei]mac-learning priority flapping-defend action discard //配置禁止MAC地址漂移时报文的处理动作为丢弃,缺省是转发
[Huawei]mac-address flapping detection exclude vlan 10 //配置MAC地址漂移检测的VLAN白名单，即指定不检测的VLAN
[Huawei]mac-address flapping detection exclude vlan 10 security-level middle //配置指定VLAN中MAC地址漂移检测的安全级别,缺省为middle，即发生10次迁移后，系统认为发生了MAC地址漂移
[Huawei]mac-address flapping aging-time 300 //配置MAC地址漂移表项的老化时间,缺省为300秒
[Huawei-GigabitEthernet0/0/1]display mac-address flapping //查看MAC地址漂移的配置信息
[Huawei]drop illegal-mac enable //能交换机丢弃全0非法MAC地址报文,缺省没有使能
[Huawei]drop illegal-mac alarm //配置交换机收到全0非法MAC地址报文时生成一条告警,缺省不生成告警
[Huawei]mac-address update arp //配置MAC刷新ARP功能
[Huawei-GigabitEthernet0/0/1]port bridge enable //配置端口桥功能
[Huawei]traffic classifier a1
[Huawei]traffic behavior b1 -remark destination-mac 1-2-3 //将符合流分类的报文重新标记目的MAC地址。重标记的目的MAC地址必须为单播MAC地址
[Huawei]traffic policy c1 -classifier a1 behavior b1
[Huawei-GigabitEthernet0/0/1]traffic-policy c1 inbound //在接口上应用流策略
[Huawei-vlan10]traffic-policy c1 inbound //在VLAN上应用流策略
[Huawei]traffic-policy c1 global inbound //在全局上应用流策略
[Huawei]display traffic policy interface g0/0/1 //查看已配置的流策略信息
[Huawei]display traffic-policy applied-record //查看指定流策略的应用记录
[Huawei]display mac-address //查看所有MAC地址表项
[Huawei]display mac-address static //查看静态MAC地址表项
[Huawei]display mac-address dynamic vlan 10 //查看指定VLAN下学习到的MAC地址表项
[Huawei]display mac-address dynamic g0/0/1 //查看指定接口下学习到的MAC地址表项
[Huawei]display mac-address aging-time //查看动态MAC地址的老化时间
[Huawei]display mac-address total-number //查看MAC地址表项总的统计计数
[Huawei]display mac-address summary //查看各种类型MAC地址表项的统计计数
[Huawei]display bridge mac-address //查看系统MAC地址
[Huawei]display interface g0/0/1 //查看接口的MAC地址
[Huawei]display interface Vlanif 10 //查看VLANIF的MAC地址
[Huawei]display trapbuffer //查看MAC地址漂移告警,存在 OID 1.3.6.1.4.1.2011.5.25.160.3.7
[Huawei]display mac-address flapping record //查看MAC地址漂移详细记录