# 在RONNON模式下输入
ronnon #1> confreg
#设备会显示当前配置注册值,并且会提示“是否要更改注册值”
Current Configuration Register: 0x00000001/当前配置寄存器:0x00000001
3、记录当前配置的注册值,以备稍后恢复
4、根据提示按Y键更改注册值
#除了“disable system configuration?<禁用系统配置吗?>”按Y键其他设置一律按照默认值
do you wish to change this configuration? y/n [n]:y 您希望更改此配置吗?
enable boot to ROMMON prompt? y/n [n]: 是否启用boot to ROMMON提示?
enable TFTP netboot? y/n [n]: 使TFTP netboot的吗?
enable Flash boot? y/n [n]: 使Flash引导?
select specific Flash image index? y/n [n]: 选择特定的Flash图像索引?
disable system configuration? y/n [n]: y 禁用系统配置吗?
go to ROMMON prompt if netboot fails? y/n [n]: 如果netboot失败,进入romon提示?
enable passing NVRAM file specs in auto-boot mode? y/n [n]:
启用通过NVRAM文件规格在自动启动模式?
disable display of BREAK or ESC key prompt during auto-boot? y/n [n]:
在自动启动期间禁用BREAK或ESC键提示?