Mac WMware Fusion 虚拟机Nat网络配置 WMware Fusion配置

Mac WMware Fusion 虚拟机Nat网络配置 WMware Fusion配置

fution版本11 macos系统版本Mojave 10.14.6

1. 本机dns配置为

192.168.200.2 114.114.114.114 （与虚拟机中的dns一样）

虚拟机查看网络配置

vi /etc/sysconfig/network-scripts/ifcfg-ens33

TYPE="Ethernet"
PROXY_METHOD="none"
BROWSER_ONLY="no"
BOOTPROTO="static"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
IPV6_ADDR_GEN_MODE="stable-privacy"
NAME="ens33"
UUID="17fd6f2c-0db2-48d6-aa84-c06aca2a128f"
DEVICE="ens33"
ONBOOT="yes"
​
IPADDR=192.168.200.128
NETMASK=255.255.255.0
GATEWAY=192.168.200.2
​
DNS1=192.168.200.2

systemctl restart network

1. 修改本机虚拟机配置

sudo vim /Library/Preferences/VMware\ Fusion/networking

主要是改subnet 还要注意 dhcp 为 yes

VERSION=1,0
answer VNET_1_DHCP yes
answer VNET_1_DHCP_CFG_HASH 9AE5218CE3D86B97807FCC5FC826F6576F3FD92A
answer VNET_1_HOSTONLY_NETMASK 255.255.255.0
answer VNET_1_HOSTONLY_SUBNET 192.168.60.0
answer VNET_1_VIRTUAL_ADAPTER yes
answer VNET_3_DHCP yes
answer VNET_3_DHCP_CFG_HASH 25F0A76B9197657987083AFFF2B03A15B51E99A6
answer VNET_3_HOSTONLY_NETMASK 255.255.255.0
answer VNET_3_HOSTONLY_SUBNET 192.168.200.0
answer VNET_3_NAT yes
answer VNET_3_NAT_PARAM_UDP_TIMEOUT 30
answer VNET_3_VIRTUAL_ADAPTER yes
answer VNET_8_DHCP no
answer VNET_8_DHCP_CFG_HASH B1778131A1E6FFB712075DD0859A7C01C05FA049
answer VNET_8_HOSTONLY_NETMASK 255.255.255.0
answer VNET_8_HOSTONLY_SUBNET 192.168.200.0
answer VNET_8_NAT yes
answer VNET_8_VIRTUAL_ADAPTER yes
add_bridge_mapping en0 2
remove_answer VNET_3_DHCP_CFG_HASH
answer VNET_3_DHCP_CFG_HASH 7AF1E797D1055662880FB6E37D8446D57F953E67

这条命令是修改虚拟机的总配置

sudo vi /Library/Preferences/VMware\ Fusion/vmnet8/nat.conf

改ip，和添加lastDhcpAddress

[host]
​
# NAT gateway address
ip = 192.168.200.1
netmask = 255.255.255.0
lastDhcpAddress = 192.168.200.254
​
# VMnet device if not specified on command line
device = vmnet8
​
# Allow PORT/EPRT FTP commands (they need incoming TCP stream ...)
activeFTP = 1
​
# Allows the source to have any OUI.  Turn this on if you change the OUI
# in the MAC address of your virtual machines.
allowAnyOUI = 1
​
# Controls if (TCP) connections should be reset when the adapter they are
# bound to goes down
resetConnectionOnLinkDown = 1

这条是修改运行虚拟机的配置

最后用主机ping虚拟机

ping 192.168.200.128

大功告成

参考：

Mac WMware Fusion 虚拟机nat网络配置_Dreamlike223的博客-CSDN博客