本文档详细记录了对多个路由器（R1, R2, R3, R4, R5）的IP地址配置过程，包括骨干链路、子网划分以及静态路由的设置。此外，还涉及R3上的DHCP服务器配置，创建IP地址池，并为接口启用DHCP服务。每个路由器都进行了默认路由的配置，确保网络连通性。最后，R5上配置了ACL以允许特定源IP访问，并开启了远程登录功能。"
7943448,231202,使用Detours拦截Windows API：VC++实战示例,"['vc++', 'winapi', 'dll', '函数拦截']
192.168.1.0/24
192.168.1.000 000 00/27---骨干链路
192.168.1.0/30
192.168.1.4/30
192.168.1.8/30
192.168.1.12/30
192.168.1.16/30
192.168.1.20/30
192.168.1.24/30
192.168.1.28/30
192.168.1.32/27-----r1
192.168.1.32/28
192.168.1.48/28
192.168.1.64/27-----r2
192.168.1.64/28
192.168.1.80/28
192.168.1.96/27-----r3
192.168.1.128/28----r4
192.168.1.128/28
192.168.1.144/28
192.168.1.101 0 0000/27--r5
192.168.1.110 000 00/27
192.168.1.111 000 00/27
R1
[r1]int g 0/0/0
[r1-GigabitEthernet0/0/0]ip address 192.168.1.1 30
Jan 3 2022 20:10:01-08:00 r1 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r1-GigabitEthernet0/0/0]int g 0/0/1
[r1-GigabitEthernet0/0/1]ip address 192.168.1.5 30
Jan 3 2022 20:11:01-08:00 r1 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r1-GigabitEthernet0/0/1]l0
^
Error: Unrecognized command found at '^' position.
[r1-GigabitEthernet0/0/1]int l0
[r1-LoopBack0]ip ad
[r1-LoopBack0]ip address 192.168.1.33 28
[r1-LoopBack0]int l1
[r1-LoopBack1]ip add 192.168.1.49 28
R2
[r2]int g 0/0/0
[r2-GigabitEthernet0/0/0]ip add 192.168.1.2 30
Jan 3 2022 20:14:27-08:00 r2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP
on the interface GigabitEthernet0/0/0 has entered the UP state.
[r2-GigabitEthernet0/0/0]int g 0/0/1
[r2-GigabitEthernet0/0/1]ip add 192.168.1.9 30
Jan 3 2022 20:14:50-08:00 r2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP
on the interface GigabitEthernet0/0/1 has entered the UP state.
[r2-GigabitEthernet0/0/1]int l0
[r2-LoopBack0]ip add 192.168.1.65 28
最低0.47元/天 解锁文章
扫一扫
363
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
