1394C-SJT22-A 伺服控制器

1394C-SJT22-A是一款伺服控制器，它具有以下主要特点和参数：
功能特点：支持多达四个轴，并可作为速度或扭矩控制器工作。
配备有模拟模块功能和10伏DC模拟接口。
带有Bulletin 1201人机界面模块，允许自动调谐和快速启动。
1394C-SJT22-A具有电源输入，如24伏交流电源、断开功能、保险丝盒和用于马达制动器和热触点的24伏DC电源。
在324至528伏、50至60赫兹的交流电下运行，效率达到98%。
具有诊断功能，包括电流监控器、热过载检测和反馈信号监控器。
具有电气噪声保护和改进的接地终端。
具有系统和安讯士模块的状态指示灯。
物理特性：适用于平坦、稳定的垂直表面安装，安装面板应具有最小的冲击和振动。
顶部间隙必须为254毫米（10.0英寸），两侧（包括系统模块的底部区域）为155毫米（6.1英寸）。
环境必须没有湿气、油、灰尘和腐蚀性气体。
电气参数：电容为660法拉，电感为500亨利。
在DC电压下，连续输出电流为33.8安培，连续输出功率为22千瓦，峰值电流为200.0安培。
数模转换器(DAC)板在控制器中执行数模转换，能够进行12位正真偏移二进制输入编码字的模拟转换，输出范围为-10至+10伏。这款伺服控制器还具有广泛的应用领域，如钢铁行业、玻璃厂等，并因其高精度、纹波小、无高频辐射干扰等特点，可用于国防、科技等领域。

1394C-SJT22-A is a servo controller with the following main features and parameters:
Features: Supports up to four axes and works as a speed or torque controller.
Equipped with analog module function and 10 volt DC analog interface.
Comes with Bulletin 1201 HMI module, allowing automatic tuning and quick start.
The 1394C-SJT22-A has power inputs such as 24-volt AC power, disconnect function, fuse box, and 24-volt DC power for motor brakes and hot contacts.
Operating at alternating current of 324 to 528 volts and 50 to 60 Hertz, the efficiency reaches 98%.
Diagnostic functions, including current monitor, thermal overload detection and feedback signal monitor.
With electrical noise protection and improved grounding terminal.
Status indicators with system and Axis modules.
Physical characteristics: Suitable for flat, stable vertical surface installation, the installation panel should have minimal impact and vibration.
The top clearance must be 254 mm (10.0 in) and the sides (including the bottom area of the system module) 155 mm (6.1 in).
The environment must be free of moisture, oil, dust and corrosive gases.
Electrical parameters: Capacitance 660 farad, inductance 500 Henri.
At DC voltage, the continuous output current is 33.8 amps, the continuous output power is 22 kW, and the peak current is 200.0 amps.
The digital-to-analog converter (DAC) board performs digital-to-analog conversion in the controller, capable of analog conversion of 12-bit positive true offset binary input code words with an output range of -10 to +10 volts. This servo controller also has a wide range of applications, such as steel industry, glass factory, and because of its high precision, small ripple, no high-frequency radiation interference characteristics, can be used in national defense, science and technology and other fields.

PM511V08 3BSE011180R1

UNITROL 1020 UNSO119A-Z,V1 3BHE030579R0003

SPHSS13

57160001-ACX

KUC711AE01 3BHB004661R0001

KUC711AE 3BHB004661R0001

DSDP140B 57160001-ACX

SYN5202-0271

PFTL101A 0.5KN 3BSE004160R1

KUC755AE105 3BHB005243R0105

HIEE205011R0002

PM866A 3BSE076359

SYN5202-0277 3BHB006715R0277

5SHY4045L0001

PM866AK01

PFTL101B 5.0KN 3BSE004191R1

PFSK113 7625013-S

EL3020

AFCO94AE02

SW-1200063

PFEA113-65 3BSE050092R65

PM866K01 3BSE050198R1

PP865 3BSE042236R1

129740-002

5SHX1445H0001 3BHL000391P0101

PFSA140 3BSE006503R1

UNITROL 1020

PM866 3BSE050200R1

KUC755AE106 3BHB005243R0106

HIEE400995R0002-3004223/010-UM B015