acad.lin--CAD数字线型

acad.lin线型自定义数字线型。

;;  C:\Users\Administrator\AppData\Roaming\Autodesk\AutoCAD 2019\R23.0\chs\Support
;;  AutoCAD Linetype Definition file
;;  Version 3.0

;;  Copyright 2418 Autodesk, Inc.  All rights reserved.
;;
;;  Use of this software is subject to the terms of the Autodesk license 
;;  agreement provided at the time of installation or download, or which 
;;  otherwise accompanies this software in either electronic or hard copy form.
;;
;;  Note: in order to ease migration of this file when upgrading 
;;  to a future version of AutoCAD, it is recommended that you add
;;  your customizations to the User Defined Linetypes section at the
;;  end of this file.
;;


; 这是 acadiso.lin 文件中自有的 GAS Line 线型，
; *GAS_LINE,Gas line ----GAS----GAS----GAS----GAS----GAS----GAS--A,12.7,-5.08,["GAS",STANDARD,S=2.54,U=0.0,X=-2.54,Y=-1.27],-6.35

; 通过这个例子，来了解下镶嵌文字线型的定义规则。
; ① 、第一行：*代表线型的名称，可使用中文，
;对应的是线型管理器窗口中的线型列；
; ②、第一行：名称之后使用英文输入法下的逗号隔开，之后输入的是线型说明，
;对应的就是线型管理器窗口中的说明列；
; ③、第二行：A代表线型两端都是实线端，
;无论线型如何定义，长度如何，都能保证画线两端为实线，所以，定义线型都选A；
; ④、第二行：
;12.7----12.7单位的实线（正数）；
;-5.08----5.08单位的空格（负数）； 
;"GAS"----英文双引号，你需要添加的文字
; STANDARD----添加文字的格式；
;S=2.54----文字的缩放比例；
;U=0.0----文字相对线的方向的旋转角度；
;X=-2.54----文字在画线方向上的偏移量（正向右，负向左）
;Y=-1.27----文字在画线垂直方向上的偏移量（正向上，负向下）
; ⑤、实线,空格,文字,空格 此为一个循环。
;注意，英文状态下的逗号分隔，文字内容的双引号，文字部分整体需用中括号；


;;  序号线型
*0NO01,0NO01 ----1----1----1----
A,3,-0.2,["1",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO02,0NO02 ----2----2
A,3,-0.2,["2",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO03,0NO03 ----3----3
A,3,-0.2,["3",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO04,0NO04 ----4----4
A,3,-0.2,["4",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO05,0NO05 ----5----5
A,3,-0.2,["5",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO06,0NO06 ----6----6
A,3,-0.2,["6",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO07,0NO07 ----7----7
A,3,-0.2,["7",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO08,0NO08 ----1----1
A,3,-0.2,["8",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2
*0NO09,0NO09 ----1----1
A,3,-0.2,["9",STANDARD,S=0.7,U=0.0,X=-0.28,Y=-0.28],-0.2

*0NO10,0NO10 ----10----10----10----
A,3,-0.4,["10",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO11,0NO11 ----11----11----
A,3,-0.4,["11",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO12,0NO12 ----12----12----
A,3,-0.4,["12",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO13,0NO13 ----13----13----
A,3,-0.4,["13",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO14,0NO14 ----14----14----
A,3,-0.4,["14",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO15,0NO15 ----15----15----
A,3,-0.4,["15",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO16,0NO16 ----16----16----
A,3,-0.4,["16",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO17,0NO17 ----17----17----
A,3,-0.4,["17",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO18,0NO18 ----18----18----
A,3,-0.4,["18",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO19,0NO19 ----19----19----
A,3,-0.4,["19",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO20,0NO20 ----20----20----
A,3,-0.45,["20",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO21,0NO21 ----21----21----
A,3,-0.45,["21",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO22,0NO22 ----22----22----
A,3,-0.45,["22",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO23,0NO23 ----23----23----
A,3,-0.45,["23",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO24,0NO24 ----24----24----
A,3,-0.45,["24",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO24,0NO24 ----24----24----
A,3,-0.45,["24",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO25,0NO25 ----25----25----
A,3,-0.45,["25",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO26,0NO26 ----26----26----
A,3,-0.45,["26",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO27,0NO27 ----27----27----
A,3,-0.45,["27",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO28,0NO28 ----28----28----
A,3,-0.45,["28",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO29,0NO29 ----29----29----
A,3,-0.45,["29",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO30,0NO30 ----30----30----
A,3,-0.45,["30",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO31,0NO31 ----31----31----
A,3,-0.45,["31",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO32,0NO32 ----32----32----
A,3,-0.45,["32",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO33,0NO33 ----33----33----
A,3,-0.45,["33",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO34,0NO34 ----34----34----
A,3,-0.45,["34",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO35,0NO35 ----35----35----
A,3,-0.45,["35",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO36,0NO36 ----36----36----
A,3,-0.45,["36",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO37,0NO37 ----37----37----
A,3,-0.45,["37",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO38,0NO38 ----38----38----
A,3,-0.45,["38",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO39,0NO39 ----39----39----
A,3,-0.45,["39",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO40,0NO40 ----40----40----
A,3,-0.55,["40",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO41,0NO41 ----41----41----
A,3,-0.45,["41",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO42,0NO42 ----42----42----
A,3,-0.45,["42",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO43,0NO43 ----43----43----
A,3,-0.45,["43",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO44,0NO44 ----44----44----
A,3,-0.45,["44",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO45,0NO45 ----45----45----
A,3,-0.45,["45",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO46,0NO46 ----46----46----
A,3,-0.45,["46",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO47,0NO47 ----47----47----
A,3,-0.45,["47",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55
*0NO48,0NO48 ----48----48----
A,3,-0.45,["48",STANDARD,S=0.7,U=0.0,X=-0.4,Y=-0.28],-0.55


*BORDER,Border __ __ . __ __ . __ __ . __ __ . __ __ .
A,.5,-.25,.5,-.25,0,-.25
*BORDER2,Border (.5x) __.__.__.__.__.__.__.__.__.__.__.
A,.25,-.125,.25,-.125,0,-.125
*BORDERX2,Border (2x) ____  ____  .  ____  ____  .  ___
A,1.0,-.5,1.0,-.5,0,-.5

*CENTER,Center ____ _ ____ _ ____ _ ____ _ ____ _ ____
A,1.25,-.25,.25,-.25
*CENTER2,Center (.5x) ___ _ ___ _ ___ _ ___ _ ___ _ ___
A,.75,-.125,.125,-.125
*CENTERX2,Center (2x) ________  __  ________  __  _____
A,2.5,-.5,.5,-.5

*DASHDOT,Dash dot __ . __ . __ . __ . __ . __ . __ . __
A,.5,-.25,0,-.25
*DASHDOT2,Dash dot (.5x) _._._._._._._._._._._._._._._.
A,.25,-.125,0,-.125
*DASHDOTX2,Dash dot (2x) ____  .  ____  .  ____  .  ___
A,1.0,-.5,0,-.5

*DASHED,Dashed __ __ __ __ __ __ __ __ __ __ __ __ __ _
A,.5,-.25
*DASHED2,Dashed (.5x) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
A,.25,-.125
*DASHEDX2,Dashed (2x) ____  ____  ____  ____  ____  ___
A,1.0,-.5

*DIVIDE,Divide ____ . . ____ . . ____ . . ____ . . ____
A,.5,-.25,0,-.25,0,-.25
*DIVIDE2,Divide (.5x) __..__..__..__..__..__..__..__.._
A,.25,-.125,0,-.125,0,-.125
*DIVIDEX2,Divide (2x) ________  .  .  ________  .  .  _
A,1.0,-.5,0,-.5,0,-.5

*DOT,Dot . . . . . . . . . . . . . . . . . . . . . . . .
A,0,-.25
*DOT2,Dot (.5x) ........................................
A,0,-.125
*DOTX2,Dot (2x) .  .  .  .  .  .  .  .  .  .  .  .  .  .
A,0,-.5

*HIDDEN,Hidden __ __ __ __ __ __ __ __ __ __ __ __ __ __
A,.25,-.125
*HIDDEN2,Hidden (.5x) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 
A,.125,-.0625
*HIDDENX2,Hidden (2x) ____ ____ ____ ____ ____ ____ ____ 
A,.5,-.25

*PHANTOM,Phantom ______  __  __  ______  __  __  ______ 
A,1.25,-.25,.25,-.25,.25,-.25
*PHANTOM2,Phantom (.5x) ___ _ _ ___ _ _ ___ _ _ ___ _ _
A,.625,-.125,.125,-.125,.125,-.125
*PHANTOMX2,Phantom (2x) ____________    ____    ____   _
A,2.5,-.5,.5,-.5,.5,-.5

;;
;;  ISO 128 (ISO/DIS 12411) linetypes
;;
;;  The size of the line segments for each defined ISO line, is 
;;  defined for an usage with a pen width of 1 mm. To use them with 
;;  the other ISO predefined pen widths, the line has to be scaled 
;;  with the appropriate value (e.g. pen width 0,5 mm -> ltscale 0.5).
;;
*ACAD_ISO02W100,ISO dash __ __ __ __ __ __ __ __ __ __ __ __ __
A,12,-3
*ACAD_ISO03W100,ISO dash space __    __    __    __    __    __
A,12,-18
*ACAD_ISO04W100,ISO long-dash dot ____ . ____ . ____ . ____ . _
A,24,-3,0,-3
*ACAD_ISO05W100,ISO long-dash double-dot ____ .. ____ .. ____ . 
A,24,-3,0,-3,0,-3
*ACAD_ISO06W100,ISO long-dash triple-dot ____ ... ____ ... ____
A,24,-3,0,-3,0,-3,0,-3
*ACAD_ISO07W100,ISO dot . . . . . . . . . . . . . . . . . . . . 
A,0,-3
*ACAD_ISO08W100,ISO long-dash short-dash ____ __ ____ __ ____ _
A,24,-3,6,-3
*ACAD_ISO09W100,ISO long-dash double-short-dash ____ __ __ ____
A,24,-3,6,-3,6,-3
*ACAD_ISO10W100,ISO dash dot __ . __ . __ . __ . __ . __ . __ . 
A,12,-3,0,-3
*ACAD_ISO11W100,ISO double-dash dot __ __ . __ __ . __ __ . __ _
A,12,-3,12,-3,0,-3
*ACAD_ISO12W100,ISO dash double-dot __ . . __ . . __ . . __ . . 
A,12,-3,0,-3,0,-3
*ACAD_ISO13W100,ISO double-dash double-dot __ __ . . __ __ . . _
A,12,-3,12,-3,0,-3,0,-3
*ACAD_ISO14W100,ISO dash triple-dot __ . . . __ . . . __ . . . _
A,12,-3,0,-3,0,-3,0,-3
*ACAD_ISO15W100,ISO double-dash triple-dot __ __ . . . __ __ . .
A,12,-3,12,-3,0,-3,0,-3,0,-3

;;  Complex linetypes
;;
;;  Complex linetypes have been added to this file.
;;  These linetypes were defined in LTYPESHP.LIN in
;;  Release 13, and are incorporated in ACAD.LIN in
;;  Release 14.
;;  
;;  These linetype definitions use LTYPESHP.SHX.
;;
*FENCELINE1,Fenceline circle ----0-----0----0-----0----0-----0--
A,.25,-.1,[CIRC1,ltypeshp.shx,x=-.1,s=.1],-.1,1
*FENCELINE2,Fenceline square ----[]-----[]----[]-----[]----[]---
A,.25,-.1,[BOX,ltypeshp.shx,x=-.1,s=.1],-.1,1
*TRACKS,Tracks -|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-|-
A,.15,[TRACK1,ltypeshp.shx,s=.25],.15
*BATTING,Batting SSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
A,.0001,-.1,[BAT,ltypeshp.shx,x=-.1,s=.1],-.2,[BAT,ltypeshp.shx,r=180,x=.1,s=.1],-.1
*HOT_WATER_SUPPLY,Hot water supply ---- HW ---- HW ---- HW ----
A,.5,-.2,["HW",STANDARD,S=.1,U=0.0,X=-0.1,Y=-.05],-.2
*GAS_LINE,Gas line ----GAS----GAS----GAS----GAS----GAS----GAS--
A,.5,-.2,["GAS",STANDARD,S=.1,U=0.0,X=-0.1,Y=-.05],-.25
*ZIGZAG,Zig zag /\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/
A,.0001,-.2,[ZIG,ltypeshp.shx,x=-.2,s=.2],-.4,[ZIG,ltypeshp.shx,r=180,x=.2,s=.2],-.2


;;  User Defined Linetypes
;;
;;  Add any linetypes that you define to this section of
;;  the file to ensure that they migrate properly when
;;  upgrading to a future AutoCAD version.  If duplicate
;;  linetype definitions are found in this file, items
;;  in the User Defined Linetypes section take precedence
;;  over definitions that appear earlier in the file.
;;