参考博文:http://blog.163.com/brave_smile_heart/blog/static/187238171201221474640314/
本机系统:ubuntu 11.10 64bit
ubuntu自带了usb_to_serial_port的驱动,经测试。PL2303插上即可用,可以使用如下命令察看串口信息
luosuo@ubuntu:~$ dmesg | grep usb
[ 0.406126] usbcore: registered new interface driver usbfs
[ 0.406135] usbcore: registered new interface driver hub
[ 0.406159] usbcore: registered new device driver usb
[ 1.472072] usb 1-6: new high speed USB device number 5 using ehci_hcd
[ 1.904077] usb 3-1: new low speed USB device number 2 using uhci_hcd
[ 2.093478] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1:1.0/input/input5
[ 2.093613] generic-usb 0003:0000:0538.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1/input0
[ 2.093726] usbcore: registered new interface driver usbhid
[ 2.093728] usbhid: USB HID core driver
[ 2.316063] usb 4-1: new full speed USB device number 2 using uhci_hcd
[ 2.724042] usb 4-2: new full speed USB device number 3 using uhci_hcd
[ 22.485966] usbcore: registered new interface driver btusb
[ 22.801001] input: HP Webcam-50 as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input6
[ 22.801459] usbcore: registered new interface driver uvcvideo
[ 1721.944106] usb 2-2: new high speed USB device number 2 using ehci_hcd
[ 1722.408917] scsi4 : usb-storage 2-2:1.0
[ 1722.409230] usbcore: registered new interface driver usb-storage
[ 1864.940121] usb 6-1: new full speed USB device number 2 using uhci_hcd
[ 1865.361759] usbcore: registered new interface driver usbserial
[ 1865.361999] usbcore: registered new interface driver usbserial_generic
[ 1865.362005] usbserial: USB Serial Driver core
[ 1865.381341] usb 6-1: pl2303 converter now attached to ttyUSB0//这个就是(usb to serial)串口的挂接点
[ 1865.381376] usbcore: registered new interface driver pl2303
luosuo@ubuntu:~$ xgcom&//打开后面安装的串口调试软件(已经安装了)
xgcom串口调试软件安装记录
软件来源:http://code.google.com/p/xgcom/
软件说明:
=========================================================================================================
1、Intro:
Linux下的图形化串口调试工具.
A gui tools to help guys debug programs remotely by series port, like minicom. part code is form gtkterm-0.99.5.
Some lib and tools are needed:
编译必须安装的库:
make, automake,libglib2.0-dev,libvte-dev,libgtk2.0-dev //必须安装的支持包。使用sudo apt-get install xxx 命令即可安装
zlbgps has put this software into AUR pakeage library
zlbgps已经把该软件放入了AUR的软件包库,使用Archlinux的用户使用下面的命令即可完成安装:
so arch users can install this program with this command :
yaourt -S xgcom
我的操作步骤:
# make //编译
# sudo make install //安装,sudo必须有
# xgcom //启动软件