51单片机数码管高位不显示

#include <reg52.h>

 

sbit ADDR0 = P1^0;

sbit ADDR1 = P1^1;

sbit ADDR2 = P1^2;

sbit ADDR3 = P1^3;

sbit ENLED = P1^4;

 

unsigned char code LedChar[] = { //数码管显示字符转换表

    0xC0, 0xF9, 0xA4, 0xB0, 0x99, 0x92, 0x82, 0xF8,

    0x80, 0x90, 0x88, 0x83, 0xC6, 0xA1, 0x86, 0x8E

};

unsigned char LedBuff[6] = { //数码管显示缓冲区，初值0xFF确保启动时都不亮

    0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF

};

unsigned char i = 0; //动态扫描的索引

unsigned int cnt = 0; //记录T0中断次数

unsigned char flag1s = 0; //1秒定时标志

 

void main()

{

    char j; //循环变量

    unsigned long sec = 0; //记录经过的秒数

    unsigned char buf[6]; //中间转换缓冲区

 

    EA = 1; //使能总中断

    ENLED = 0; //使能U3

    ADDR3 = 1; //因为需要动态改变ADDR0-2的值，所以不需要再初始化了

    TMOD = 0x01; //设置