# is this config file disabled# false for enabled# true for disabled
disabled=false# the name of the group this storage server belongs to## comment or remove this item for fetching from tracker server,# in this case, use_storage_id must set to true in tracker.conf,# 分组名# and storage_ids.conf must be configed correctly.
group_name=group1
# bind an address of this host# empty for bind all addresses of this host
bind_addr=
# if bind an address of this host when connect to other servers # (this storage server as a client)# true for binding the address configed by above parameter: "bind_addr"# false for binding any address of this host
client_bind=true# the storage服务器 server port
port=23000# connect timeout in seconds# default value is 30s
connect_timeout=30# network timeout in seconds# default value is 30s
network_timeout=60# heart beat interval in seconds
heart_beat_interval=30# disk usage report interval in seconds
stat_report_interval=60# 容器内文件存储路径# the base path to store data and log files
base_path=/var/fdfs
# max concurrent connections the server supported# default value is 256# more max_connections means more memory will be used
max_connections=256# the buff size to recv / send data# this parameter must more than 8KB# default value is 64KB# since V2.00
buff_size = 256KB
# accept thread count# default value is 1# since V4.07
accept_threads=1# work thread count, should <= max_connections# work thread deal network io# default value is 4# since V2.00
work_threads=4# if disk read / write separated## false for mixed read and write## true for separated read and write# default value is true# since V2.00
disk_rw_separated = true# disk reader thread count per store base path# for mixed read / write, this parameter can be 0# default value is 1# since V2.00
disk_reader_threads = 1# disk writer thread count per store base path# for mixed read / write, this parameter can be 0# default value is 1# since V2.00
disk_writer_threads = 1# when no entry to sync, try read binlog again after X milliseconds# must > 0, default value is 200ms
sync_wait_msec=50# after sync a file, usleep milliseconds# 0 for sync successively (never call usleep)
sync_interval=0# storage sync start time of a day, time format: Hour:Minute# Hour from 0 to 23, Minute from 0 to 59
sync_start_time=00:00# storage sync end time of a day, time format: Hour:Minute# Hour from 0 to 23, Minute from 0 to 59
sync_end_time=23:59# write to the mark file after sync N files# default value is 500
write_mark_file_freq=500# path(disk or mount point) count, default value is 1
store_path_count=1# store_path#, based 0, if store_path0 not exists, it's value is base_path# the paths must be exist
store_path0=/var/fdfs
#store_path1=/var/fdfs2# subdir_count * subdir_count directories will be auto created under each # store_path (disk), value can be 1 to 256, default value is 256
subdir_count_per_path=256# tracker_server服务器ip:端口# tracker_server can ocur more than once, and tracker_server format is# "host:port", host can be hostname or ip address
tracker_server=192.168.41.67:22122#standard log level as syslog, case insensitive, value list:### emerg for emergency### alert### crit for critical### error### warn for warning### notice### info### debug
log_level=info
#unix group name to run this program, #not set (empty) means run by the group of current user
run_by_group=
#unix username to run this program,#not set (empty) means run by current user
run_by_user=
# allow_hosts can ocur more than once, host can be hostname or ip address,# "*" (only one asterisk) means match all ip addresses# we can use CIDR ips like 192.168.5.64/26# and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com# for example:# allow_hosts=10.0.1.[1-15,20]# allow_hosts=host[01-08,20-25].domain.com# allow_hosts=192.168.5.64/26
allow_hosts=*
# the mode of the files distributed to the data path# 0: round robin(default)# 1: random, distributted by hash code
file_distribute_path_mode=0# valid when file_distribute_to_path is set to 0 (round robin), # when the written file count reaches this number, then rotate to next path# default value is 100
file_distribute_rotate_count=100# call fsync to disk when write big file# 0: never call fsync# other: call fsync when written bytes >= this bytes# default value is 0 (never call fsync)
fsync_after_written_bytes=0# sync log buff to disk every interval seconds# must > 0, default value is 10 seconds
sync_log_buff_interval=10# sync binlog buff / cache to disk every interval seconds# default value is 60 seconds
sync_binlog_buff_interval=10# sync storage stat info to disk every interval seconds# default value is 300 seconds
sync_stat_file_interval=300# thread stack size, should >= 512KB# default value is 512KB
thread_stack_size=512KB
# the priority as a source server for uploading file.# the lower this value, the higher its uploading priority.# default value is 10
upload_priority=10# the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a# multi aliases split by comma. empty value means auto set by OS type# default values is empty
if_alias_prefix=
# if check file duplicate, when set to true, use FastDHT to store file indexes# 1 or yes: need check# 0 or no: do not check# default value is 0
check_file_duplicate=0# file signature method for check file duplicate## hash: four 32 bits hash code## md5: MD5 signature# default value is hash# since V4.01
file_signature_method=hash
# namespace for storing file indexes (key-value pairs)# this item must be set when check_file_duplicate is true / on
key_namespace=FastDFS
# set keep_alive to 1 to enable persistent connection with FastDHT servers# default value is 0 (short connection)
keep_alive=0# you can use "#include filename" (not include double quotes) directive to # load FastDHT server list, when the filename is a relative path such as # pure filename, the base path is the base path of current/this config file.# must set FastDHT server list when check_file_duplicate is true / on# please see INSTALL of FastDHT for detail##include /home/yuqing/fastdht/conf/fdht_servers.conf# if log to access log# default value is false# since V4.00
use_access_log = false# if rotate the access log every day# default value is false# since V4.00
rotate_access_log = false# rotate access log time base, time format: Hour:Minute# Hour from 0 to 23, Minute from 0 to 59# default value is 00:00# since V4.00
access_log_rotate_time=00:00# if rotate the error log every day# default value is false# since V4.02
rotate_error_log = false# rotate error log time base, time format: Hour:Minute# Hour from 0 to 23, Minute from 0 to 59# default value is 00:00# since V4.02
error_log_rotate_time=00:00# rotate access log when the log file exceeds this size# 0 means never rotates log file by log file size# default value is 0# since V4.02
rotate_access_log_size = 0# rotate error log when the log file exceeds this size# 0 means never rotates log file by log file size# default value is 0# since V4.02
rotate_error_log_size = 0# keep days of the log files# 0 means do not delete old log files# default value is 0
log_file_keep_days = 0# if skip the invalid record when sync file# default value is false# since V4.02
file_sync_skip_invalid_record=false# if use connection pool# default value is false# since V4.05
use_connection_pool = false# connections whose the idle time exceeds this time will be closed# unit: second# default value is 3600# since V4.05
connection_pool_max_idle_time = 3600# use the ip address of this storage server if domain_name is empty,# else this domain name will ocur in the url redirected by the tracker server
http.domain_name=
# web服务器端# the port of the web server on this storage server
http.server_port=8888