RHCE-第一天作业

在当前主机（虚拟机）添加两块网卡，将两块网卡绑定实现网卡冗余操作

1.先在虚拟机上添加网卡--添加网络适配器

且模式相同

2.然后打开虚拟机终端，输入ip a查看网卡是否添加成功

这里就激活了两个网卡

3.添加虚拟网卡

代码：

[root@localhost ~]# nmcli connection add type team ifname team0 con-name team0 config '{"runner":{"name":"activebackup"}}'

Connection 'team0' (4afa7466-2898-499f-a079-92bcf34eb204) successfully added.

[root@localhost ~]#

4.虚拟网卡绑定真实网卡

[root@localhost ~]# nmcli connection add type team-slave ifname ens224 con-name team0-port1 master team0

Connection 'team0-port1' (4ad46bef-9142-45f6-a092-e90ab3cbf7c4) successfully added.

[root@localhost ~]# nmcli connection add type team-slave ifname ens256 con-name team0-port2 master team0

Connection 'team0-port2' (037749c6-8257-43a4-9a2d-3a114e45e5c1) successfully added.

7: team0: mtu 1500 qdisc noqueue state DOWN group default qlen 1000

link/ether 5e:d1:87:27:b5:96 brd ff:ff:ff:ff:ff:ff

通过查看，发现team0并没有激活，所以还要激活team0

5.激活team0

激活顺序：先从后主

[root@localhost ~]# nmcli connection up team0-port1

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/6)

[root@localhost ~]# nmcli connection up team0-port2

Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/7)

[root@localhost ~]# nmcli connection up team0

Connection successfully activated (master waiting for slaves) (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/8)

[root@localhost ~]#

2）查看会话，是否激活成功----nmcli connection show

6.测试网卡绑定状态